ANSI B16.5 Class 150 Threaded Flanges
India’s Leading ANSI B16.5 Alloy Steel Class 150 Threaded Flanges Supplier in india, Class 150 Screwed Flange at Low Price, Buy Stainless Steel ANSI B16.5 Class 150 Threaded Flange, BS4504 Threaded Flange Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a prominent manufacturer and distributor of ANSI B16.5 Class 150 Threaded Flanges, which are generally warm dip stirred for mounting its carrier life.
It assures within the commercial piping structures for a clean run of liquid. They are made of with the aid of using the usage of excessive exceptional of metallic forgings, and for this reason they may be very plenty excessive in its overall performance and durability. Copper Nickel ANSI B16.5 Class 150 Threaded Flanges sufficiently contains out the ones commercial necessities that call for extraordinarily durable, qualitative and dependable merchandise. It is a sort of alloy this is being installed in among the pipe or tube lengths for to permit the extrude within the direction of a flow.
They are cautiously examined and is makes positive to offer one of the splendid widespread exceptional through in lifestyles of sturdy circumstances. The distinctive variety of such Titanium Alloy ANSI B16.5 Class 150 Threaded Flanges is broadly utilized in liquid allotting industries because of their capabilities of superlative permanence, outstanding corrosion resistant and excessive overall performance. It is suggested for suction carrier and low-stress launch for distinctive drinks which can be in parallel disposition, and now no longer for compressible merchandise along with nitrogen, steam or air. However, the primary characteristic of such flanges lets in an effortlessness of proper to apply interior a piping gadget as soon as it’s been blocked-up.
It joins pipes with the aid of using manner of various diameters allied to it, and has a hexagonal head for a huge bearing facade whilst solving with the proper via a tug. Alloy 20 ANSI B16.5 Class 150 Threaded Flanges are normally made with surrounded with the aid of using diameter of the pipe this is advanced to the outer diameter of the pipe. On different hand, it’s far regularly known as a neck piece of the flange this is honestly welded to the previous factors of the piping gadget. Such sort of flanges has an intensive tapered consciousness and is generally used for hovering stress applications. They also are significantly utilized in excessive stress usages.
Largest Manufacturer & Supplier of ANSI B16.5 Class 150 Threaded Flange, DIN 2641 Threaded Flange, B16.5 Class 150 Screwed Flanges Jis B2220, EN1092-1 Threaded Flange Supplier, CF8M Class 150 Threaded Flanges in Mumbai, India.
Specification Of ANSI B16.5 Class 150 Threaded Flange
| ANSI B16.5 Class 150 Threaded Flange Standards | ANSI B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ANSI Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JIS B2220, BS1560-3.1, API7S-15, API7S-43, API 605, EN1092 |
|---|---|
| ANSI B16.5 Class 150 Threaded Flange Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| ANSI B16.5 ANSI B16.5 Class 150 Threaded Flange Size Chart | 1/2″ (15 NB) to 48″ (1200 NB) DN10~DN5000 |
| ANSI B16.5 Class 150 Threaded Flange Pressure Calculation in DIN | 6 Bar, 10Bar, 16Bar, 25Bar, 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Most common types of ANSI B16.5 Class 150 Threaded Flange | Forged / Threaded / Screwed / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
| Special design | As per your drawing
AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Manufacturer of | ANSI, DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ANSI B16.5 Class 150 Threaded Flange : -BS Flange, EN Flange, API 6A Flanges, ANSI Flanges, ANSI Flanges, DIN Flanges, EN1092-1 Flanges, UNI Flanges, JIS/ KS Flanges, BS4504 Flanges, GB Flanges, AWWA C207 Flanges, GOST Flanges, PSI Flangse
|
| ANSI B16.5 Class 150 Threaded Flange Uses & application |
|
| Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Manufacturing ANSI B16.5 Class 150 Threaded Flanges Specification
| Nominal Pipe Size | Outside Diameter (O) | Thickness (T) | Raised Face Diameter (R) | Length Thru Hub (Y) | Point of Weld (A) | Hub Diameter (X) | Bore (B) | Approximate Weight (lbs) | Bolt Circle (C) | Number of Holes | Diameter of Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 3.50 | 0.44 | 1.38 | 1.88 | 0.84 | 1.19 | 0.62 | 2 | 2.38 | 4 | 0.63 |
| 3/4 | 3.88 | 0.50 | 1.69 | 2.06 | 1.05 | 1.50 | 0.82 | 2 | 2.75 | 4 | 0.63 |
| 1 | 4.25 | 0.56 | 2.00 | 2.19 | 1.32 | 1.94 | 1.05 | 3 | 3.13 | 4 | 0.63 |
| 1 1/4 | 4.63 | 0.63 | 2.50 | 2.25 | 1.66 | 2.31 | 1.38 | 3 | 3.50 | 4 | 0.63 |
| 1 1/2 | 5.00 | 0.69 | 2.88 | 2.44 | 1.90 | 2.56 | 1.61 | 4 | 3.88 | 4 | 0.63 |
| 2 | 6.00 | 0.75 | 3.63 | 2.50 | 2.38 | 3.06 | 2.07 | 6 | 4.75 | 4 | 0.75 |
| 2 1/2 | 7.00 | 0.88 | 4.13 | 2.75 | 2.88 | 3.56 | 2.47 | 8 | 5.50 | 4 | 0.75 |
| 3 | 7.50 | 0.94 | 5.00 | 2.75 | 3.50 | 4.25 | 3.07 | 10 | 6.00 | 4 | 0.75 |
| 3 1/2 | 8.50 | 0.94 | 5.50 | 2.81 | 4.00 | 4.81 | 3.55 | 12 | 7.00 | 8 | 0.75 |
| 4 | 9.00 | 0.94 | 6.19 | 3.00 | 4.50 | 5.31 | 4.03 | 15 | 7.50 | 8 | 0.75 |
| 5 | 10.00 | 0.94 | 7.31 | 3.50 | 5.56 | 6.44 | 5.05 | 19 | 8.50 | 8 | 0.88 |
| 6 | 11.00 | 1.00 | 8.50 | 3.50 | 6.63 | 7.56 | 6.07 | 24 | 9.50 | 8 | 0.88 |
| 8 | 13.50 | 1.13 | 10.63 | 4.00 | 8.63 | 9.69 | 7.98 | 39 | 11.75 | 8 | 0.88 |
| 10 | 16.00 | 1.19 | 12.75 | 4.00 | 10.75 | 12.00 | 10.02 | 52 | 14.25 | 12 | 1.00 |
| 12 | 19.00 | 1.25 | 15.00 | 4.50 | 12.75 | 14.38 | 12.00 | 80 | 17.00 | 12 | 1.00 |
| 14 | 21.00 | 1.38 | 16.25 | 5.00 | 14.00 | 15.75 | 13.25 | 110 | 18.75 | 12 | 1.13 |
| 16 | 23.50 | 1.44 | 18.50 | 5.00 | 16.00 | 18.00 | 15.25 | 140 | 21.25 | 16 | 1.13 |
| 18 | 25.00 | 1.56 | 21.00 | 5.50 | 18.00 | 19.88 | 17.25 | 150 | 22.75 | 16 | 1.25 |
| 20 | 27.50 | 1.69 | 23.00 | 5.69 | 20.00 | 22.00 | 19.25 | 180 | 25.00 | 20 | 1.25 |
| 22 | 29.50 | 1.81 | 25.25 | 5.88 | 22.00 | 24.25 | 21.25 | 225 | 27.25 | 20 | 1.38 |
| 24 | 32.00 | 1.88 | 27.25 | 6.00 | 24.00 | 26.13 | 23.25 | 260 | 29.50 | 20 | 1.38 |
ANSI B16.5 Class 150 Threaded Flanges Dimensions & Weight Chart
| ANSI B16.5 150lb/sq.in. Threaded Flange | ||||||||||
| ø | D | b | g | m | J | h | k | Holes | l | Kg. |
| 1/2″ | 88,9 | 11,1 | 34,9 | 30,2 | 22,3 | 15,9 | 60,3 | 4 | 15,9 | 0,400 |
| 3/4″ | 98,4 | 12,7 | 42,9 | 38,1 | 27,7 | 15,9 | 69,8 | 4 | 15,9 | 0,700 |
| 1″ | 107,9 | 14,3 | 50,8 | 49,2 | 34,5 | 17,5 | 79,4 | 4 | 15,9 | 0,800 |
| 1 1/4″ | 117,5 | 15,9 | 63,5 | 58,8 | 43,2 | 20,6 | 88,9 | 4 | 15,9 | 1,100 |
| 1 1/2″ | 127,0 | 17,5 | 73,0 | 65,1 | 49,5 | 22,2 | 98,4 | 4 | 15,9 | 1,400 |
| 2″ | 152,4 | 19,0 | 92,1 | 77,8 | 62,0 | 25,4 | 120,6 | 4 | 19,0 | 2,200 |
| 2 1/2″ | 177,8 | 22,2 | 104,8 | 90,5 | 74,7 | 28,6 | 139,7 | 4 | 19,0 | 3,600 |
| 3″ | 190,5 | 23,8 | 127,0 | 107,9 | 90,7 | 30,2 | 152,4 | 4 | 19,0 | 4,100 |
| 3 1/2″ | 215,9 | 23,8 | 139,7 | 122,2 | 103,4 | 31,7 | 177,8 | 8 | 19,0 | 5,200 |
| 4″ | 228,6 | 23,8 | 157,2 | 134,9 | 116,1 | 33,3 | 190,5 | 8 | 19,0 | 5,600 |
| 5″ | 254,0 | 23,8 | 185,7 | 163,6 | 143,8 | 36,5 | 215,9 | 8 | 22,2 | 6,300 |
| 6″ | 279,4 | 25,4 | 215,9 | 192,1 | 170,7 | 39,7 | 241,3 | 8 | 22,2 | 7,500 |
| 8″ | 342,9 | 28,6 | 269,9 | 246,1 | 221,5 | 44,4 | 298,4 | 8 | 22,2 | 12,600 |
| 10″ | 406,4 | 30,2 | 323,8 | 304,8 | 276,3 | 49,2 | 361,9 | 12 | 25,4 | 18,500 |
| 12″ | 482,6 | 31,7 | 381,0 | 365,1 | 327,1 | 55,6 | 431,8 | 12 | 25,5 | 28,000 |
| 14″ | 533,4 | 34,9 | 412,7 | 400,0 | 359,1 | 57,1 | 476,2 | 12 | 28,6 | 36,000 |
| 16″ | 596,9 | 36,5 | 469,9 | 457,2 | 410,5 | 63,5 | 539,7 | 16 | 28,6 | 46,000 |
| 18″ | 635,0 | 39,7 | 533,4 | 504,8 | 461,8 | 68,3 | 577,8 | 16 | 31,7 | 50,000 |
| 20″ | 698,5 | 42,9 | 584,2 | 558,8 | 513,1 | 73,0 | 635,0 | 20 | 31,7 | 64,000 |
| 22″ | 749,3 | 46,0 | 641,2 | 609,6 | 564,4 | 79,4 | 692,1 | 20 | 34,9 | 72,000 |
| 24″ | 812,8 | 47,6 | 692,1 | 663,6 | 615,9 | 82,5 | 749,3 | 20 | 34,9 | 89,000 |
B16.5 Class 150 Threaded Flange Material
| Carbon Steel ANSI B16.5 Class 150 Threaded Flange | ASTM/ANSI A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ANSI SA105, A105N, ASTM A350 LF2 / ANSI SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
| Stainless Steel ANSI B16.5 Class 150 Threaded Flange | ASTM/ANSI A/SA182 F304, F304L, F316, F316L, ASTM/ANSI A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
| Alloy Steel ANSI B16.5 Class 150 Threaded Flange | ASTM A182 / ANSI SA182 F5, F9, F11, F12, F22, F91 |
| Titanium ANSI B16.5 Class 150 Threaded Flange | ASTM B381 / ANSI SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
| Copper ANSI B16.5 Class 150 Threaded Flange | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
| Copper Nickel ANSI B16.5 Class 150 Threaded Flange | ASTM / ANSI SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
| Brass ANSI B16.5 Class 150 Threaded Flange | 3602 / 2604 / H59 / H62 / etc. |
| Inconel ANSI B16.5 Class 150 Threaded Flange | ASTM B564 / ANSI SB564, Inconel 600, 601, 625, 718, 783, 690, x750 ANSI B16.5 Class 150 Threaded Flange |
| Hastelloy ANSI B16.5 Class 150 Threaded Flange | ASTM B564 / ANSI SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
| Monel ANSI B16.5 Class 150 Threaded Flange | ASTM B564 / ANSI SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
| Alloy 20 ANSI B16.5 Class 150 Threaded Flange | ASTM B462 / ANSI SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
| Aluminium ANSI B16.5 Class 150 Threaded Flange | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
| Nickel ANSI B16.5 Class 150 Threaded Flange | ASTM B564 / ANSI SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
| Duplex ANSI B16.5 Class 150 Threaded Flange | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Super Duplex ANSI B16.5 Class 150 Threaded Flange | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Incoloy ANSI B16.5 Class 150 Threaded Flange | ASTM B564 / ANSI SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
| 254 Smo ANSI B16.5 Class 150 Threaded Flange | ASTM A182 / ANSI SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
| Nimonic ANSI B16.5 Class 150 Threaded Flange | Nimonic 75, Nimonic 80A, Nimonic 90 |
| Other ANSI B16.5 Class 150 Threaded Flange material | Tin bronze, Aluminum bronze, Lead bronze |
Weight Chart of ANSI B16.5 Class 150 Threaded Flange
| Flange Weights by Pressure Class and Size | ||||||||||||||||||
| Pipe Size | 150 # | 300 # | 600 # | 900 # | 1500 # | 2500 # | ||||||||||||
| WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | |
| 1/2″ | 2 | 1 | 1 | 2 | 1 | 1 | 2 | 2 | 2 | SEE 1500 # WEIGHTS | 5 | 4 | 4 | 7 | 7 | 7 | ||
| 3/4″ | 2 | 2 | 2 | 3 | 3 | 3 | 4 | 3 | 3 | SEE 1500 # WEIGHTS | 6 | 5 | 6 | 8 | 8 | 8 | ||
| 1″ | 3 | 2 | 2 | 4 | 3 | 3 | 4 | 4 | 4 | SEE 1500 # WEIGHTS | 9 | 8 | 8 | 12 | 11 | 11 | ||
| 1 1/2″ | 4 | 3 | 3 | 7 | 6 | 6 | 8 | 7 | 8 | SEE 1500 # WEIGHTS | 13 | 12 | 13 | 25 | 22 | 23 | ||
| 2″ | 6 | 5 | 5 | 9 | 7 | 8 | 12 | 9 | 10 | SEE 1500 # WEIGHTS | 25 | 25 | 25 | 42 | 37 | 39 | ||
| 2 1/2″ | 8 | 7 | 7 | 12 | 10 | 12 | 18 | 13 | 15 | SEE 1500 # WEIGHTS | 36 | 36 | 35 | 52 | 55 | 56 | ||
| 3″ | 10 | 8 | 9 | 15 | 13 | 16 | 23 | 16 | 20 | 31 | 26 | 29 | 48 | 48 | 48 | 94 | 83 | 86 |
| 4″ | 15 | 13 | 17 | 25 | 22 | 27 | 42 | 37 | 41 | 53 | 53 | 54 | 73 | 73 | 73 | 145 | 125 | 130 |
| 5″ | 19 | 15 | 20 | 32 | 28 | 35 | 68 | 63 | 68 | 86 | 83 | 87 | 130 | 130 | 140 | 245 | 210 | 225 |
| 6″ | 24 | 19 | 26 | 42 | 39 | 50 | 81 | 80 | 86 | 110 | 110 | 115 | 165 | 165 | 160 | 380 | 325 | 345 |
| 8″ | 39 | 30 | 45 | 67 | 58 | 81 | 120 | 115 | 140 | 175 | 170 | 200 | 275 | 260 | 300 | 580 | 485 | 530 |
| 10″ | 52 | 43 | 70 | 91 | 81 | 124 | 190 | 170 | 230 | 260 | 245 | 290 | 455 | 435 | 510 | 1075 | 930 | 1025 |
| 12″ | 80 | 64 | 110 | 140 | 115 | 185 | 225 | 200 | 295 | 325 | 325 | 415 | 690 | 580 | 690 | 1525 | 1100 | 1300 |
| 14″ | 110 | 90 | 140 | 180 | 165 | 250 | 280 | 230 | 355 | 400 | 400 | 520 | 940 | NA | 975 | NA | NA | NA |
| 16″ | 140 | 98 | 180 | 250 | 190 | 295 | 390 | 330 | 495 | 495 | 425 | 600 | 1250 | NA | 1300 | NA | NA | NA |
| 18″ | 150 | 130 | 220 | 320 | 250 | 395 | 475 | 400 | 630 | 680 | 600 | 850 | 1625 | NA | 1750 | NA | NA | NA |
| 20″ | 180 | 165 | 285 | 400 | 315 | 505 | 590 | 510 | 810 | 830 | 730 | 1075 | 2050 | NA | 2225 | NA | NA | NA |
| 22″ | 225 | 185 | 355 | 465 | 370 | 640 | 720 | 590 | 1000 | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| 24″ | 260 | 220 | 430 | 580 | 475 | 790 | 830 | 730 | 1250 | 1500 | 1400 | 2025 | 3325 | NA | 3625 | NA | NA | NA |
ANSI B16.5 #150 Threaded Flange Pressure Ratings
| Maximum Allowable non-shock Pressure (psig) | |||||||
|---|---|---|---|---|---|---|---|
| Temperature (oF) |
Pressure Class (lb) | ||||||
| 150 | 300 | 400 | 600 | 900 | 1500 | 2500 | |
| Hydrostatic Test Pressure (psig) | |||||||
| 450 | 1125 | 1500 | 2225 | 3350 | 5575 | 9275 | |
| -20 to 100 | 290 | 750 | 1000 | 1500 | 2250 | 3750 | 6250 |
| 200 | 260 | 750 | 1000 | 1500 | 2250 | 3750 | 6250 |
| 300 | 230 | 730 | 970 | 1455 | 2185 | 3640 | 6070 |
| 400 | 200 | 705 | 940 | 1405 | 2110 | 3520 | 5865 |
| 500 | 170 | 665 | 885 | 1330 | 1995 | 3325 | 5540 |
| 600 | 140 | 605 | 805 | 1210 | 1815 | 3025 | 5040 |
| 650 | 125 | 590 | 785 | 1175 | 1765 | 2940 | 4905 |
| 700 | 110 | 555 | 740 | 1110 | 1665 | 2775 | 4630 |
| 750 | 95 | 505 | 675 | 1015 | 1520 | 2535 | 4230 |
| 800 | 80 | 410 | 550 | 825 | 1235 | 2055 | 3430 |
| 850 | 65 | 320 | 425 | 640 | 955 | 1595 | 2655 |
| 900 | 50 | 225 | 295 | 445 | 670 | 1115 | 1855 |
| 950 | 35 | 135 | 185 | 275 | 410 | 685 | 1145 |
| 1000 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
ANSI B16.5 #150 Threaded Flange Schedule Chart
| Screwed FLANGES BORES (in inchines) | ||||||||||||||
| Nom Pipe Size |
Outside Diam |
Sched 10 |
Sched 20 |
Sched 30 |
Std. Wall |
Sched 40 |
Sched 60 |
Extra Strong |
Sched 80 |
Sched 100 |
Sched 120 |
Sched 140 |
Sched 160 |
Double Extra Strong |
| 1/2” | 0.840 | 0.674 | – | – | 0.622 | 0.622 | – | 0.546 | 0.546 | – | – | – | 0.464 | 0.252 |
| 3/4” | 1.050 | 0.884 | – | – | 0.824 | 0.824 | – | 0.742 | 0.742 | – | – | – | 0.612 | 0.434 |
| 1” | 1.315 | 1.097 | – | – | 1.049 | 1.049 | – | 0.957 | 0.957 | – | – | – | 0.815 | 0.599 |
| 1.1/4” | 1.660 | 1.442 | – | – | 1.380 | 1.380 | – | 1.278 | 1.278 | – | – | – | 1.160 | 0.896 |
| 1.1/2” | 1.900 | 1.682 | – | – | 1.610 | 1.610 | – | 1.500 | 1.500 | – | – | – | 1.338 | 1.100 |
| 2” | 2.375 | 2.157 | – | – | 2.067 | 2.067 | – | 1.939 | 1.939 | – | – | – | 1.687 | 1.503 |
| 2.1/2” | 2.875 | 2.635 | – | – | 2.469 | 2.469 | – | 2.323 | 2.323 | – | – | – | 2.125 | 1.771 |
| 3” | 3.500 | 3.260 | – | – | 3.068 | 3.068 | – | 2.900 | 2.900 | – | – | – | 2.624 | 2.300 |
| 3-1/2” | 4.000 | 3.760 | – | – | 3.548 | 3.548 | – | 3.364 | 3.364 | – | – | – | – | 2.728 |
| 4” | 4.500 | 4.260 | – | – | 4.026 | 4.026 | – | 3.826 | 3.826 | – | 3.624 | – | 3.438 | 3.152 |
| 5” | 5.563 | 5.295 | – | – | 5.047 | 5.047 | – | 4.813 | 4.813 | – | 4.563 | – | 4.313 | 4.063 |
| 6” | 6.625 | 6.357 | – | – | 6.065 | 6.065 | – | 5.761 | 5.761 | – | 5.501 | – | 5.187 | 4.897 |
| 8” | 8.625 | 8.329 | 8.125 | 8.071 | 7.981 | 7.981 | 7.813 | 7.625 | 7.625 | 7.437 | 7.187 | 7.001 | 6.813 | 6.875 |
| 10” | 10.750 | 10.420 | 10.250 | 10.136 | 10.020 | 10.020 | 9.750 | 9.750 | 9.562 | 9.312 | 9.062 | 8.750 | 8.500 | 8.750 |
| 12” | 12.750 | 12.390 | 12.250 | 12.090 | 12.000 | 11.938 | 11.626 | 11.750 | 11.374 | 11.062 | 10.750 | 10.500 | 10.126 | 10.750 |
| 14” | 14.000 | 13.500 | 13.376 | 13.250 | 13.250 | 13.124 | 12.812 | 13.000 | 12.500 | 12.124 | 11.814 | 11.500 | 11.188 | – |
| 16” | 16.000 | 15.500 | 15.376 | 15.250 | 15.250 | 15.000 | 14.688 | 15.000 | 14.312 | 13.938 | 13.564 | 13.124 | 12.812 | – |
| 18” | 18.000 | 17.500 | 17.376 | 17.124 | 17.250 | 16.876 | 16.500 | 17.000 | 16.124 | 15.688 | 15.250 | 14.876 | 14.438 | – |
| 20” | 20.000 | 19.500 | 19.250 | 19.000 | 19.250 | 18.812 | 18.376 | 19.000 | 17.938 | 17.438 | 17.000 | 16.500 | 16.062 | – |
| 24” | 24.000 | 23.500 | 23.250 | 22.876 | 23.250 | 22.624 | 22.062 | 23.000 | 21.562 | 20.938 | 20.376 | 19.876 | 19.312 | – |
| 30” | 30.000 | 29.376 | 29.000 | 28.750 | 29.250 | – | – | 29.000 | – | – | – | – | – | – |
| 36” | 36.000 | 35.376 | 35.000 | 34.750 | 35.250 | 34.500 | – | 35.000 | – | – | – | – | – | – |
| 42” | 42.000 | – | – | – | 41.250 | – | – | 41.000 | – | – | – | – | – | – |
Dimension Tolerance Class 150 Threaded Flanges
| Certificate | Plate Thickness in mm | Width in mm | Length in mm | |
|---|---|---|---|---|
| Outside Diameter | When O is 24″ or less. When O is over 24″. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
| Diameter of Contact Face | 0.06″ (1.6 mm) raised face. 0.25″ (6.4 mm) raised face. |
±0.03″ ±0.02″ | ±0.8 mm | ±0.5mm |
| Diameter of Hub at Point of Welding | NPS 5 and smaller. NPS 6 and larger. |
+0.09″, -0.03″ +0.16″, -0.03″ | +2.4 mm, -0.8mm | +4.0 mm, -0.8 mm |
| Inside Diameter | NPS 10, 12, 18, 20 and larger. | +0.03″ +0.06″ +0.12″, -0.06″ | +0.8 mm +1.6 mm | +3.2 mm, -1.6 mm |
| Diameter of Hub at Base | Hub Base is 24″or less. Hub Base is over 24″. |
+0.06″ +0.12″ | +1.6 mm | +3.2 mm |
| Thickness | NPS 18 and smaller. NPS 20 and larger. |
+0.12″ +0.19″ | +3.2 mm | +4.8 mm |
| Drilling and Facings | Bolt circle diameter Bolt Hole Spacing | ±0.06″ ±0.03″ | ±1.6 mm | ±0.8 mm |
| Eccentricity of Bolt Circle and Facing | NPS 2 1/2 and smaller. NPS 3 and larger. |
±0.03″ ±0.06″ | ±0.8 mm | ±1.6 mm |
| Length Through Hub | NPS 10 and smaller. NPS 12 and larger. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
Types of ANSI B16.5 Alloy Steel Class 150 Threaded Flanges We Supply
| BS1560 Threaded Flange | ANSI B16.5 Class 150 Threaded Flange Pn10 |
| ANSI B16.5 Class 150 Threaded Flange Din 2527 | ANSI B16.5 Class 150 Threaded Flange Din En 1092-1 Supplier |
| ANSI B16.5 Class 150 Threaded Flange Din 2633 | ANSI B16.5 Class 150 Threaded Flange Din 2576 |
| ANSI B16.5 Class 150 Threaded Flange CF3M | Din 2628 300# Threaded Flange |
| EN1092-1 Screwed Flanges | ANSI B16.5, SCH 40 Screwed Flanges |