ANSI B16.5 Class 1500 Welding Neck Flanges
India’s Leading ANSI B16.5 Alloy Steel Class 1500 Weld Neck Flanges Supplier in india, Class 1500 WNRF Flange at Low Price, Buy Class 1500 BS1560 WN Flanges, DIN 2527 Welding Neck Flange Manufacturer, BS4504 Welding Neck Flange Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a prominent seller and manufacturer of ANSI B16.5 Class 1500 Welding Neck Flanges, which has tremendous resistance to aqueous corrosion.
It suggests very excessive tensile, yield, and creep-rupture capabilities at hovering temperatures. It has exquisite creep-rupture efficiency at temperatures until 1300 Degree F. It is provided with the aid of state-of-the-art machines and techniques. Stainless Steel ANSI B16.5 Class 1500 Welding Neck Flanges are frequently utilized in nuclear reactors and pollution-manipulate equipment. It properly validates huge safety in competition to oxidation and corrosion. The terrific sturdiness and energy of such flanges are within the temperature collection cryogenic to 1093 Degree C. They are by-product specifically from the stable answer possessions of the refractory metals, molybdenum and columbium, in a chromium-nickel matrix.
It has terrific fatigue electricity and strain-corrosion cracking resistance to chloride ions. They are drastically suitable for distinctive functions in distinctive industries. It is beneficial for chemical development equipment which includes technique heaters, condenser tubes and combustor components. Carbon Steel ANSI B16.5 Class 1500 Welding Neck Flanges has been successfully used within the following uses, which include annealing, sintering muffles, retorts and copper brazing. It stands proud due to its resistance to hovering temperature oxidation. It has tremendous warm corrosion resistance below oxidizing environments. The austenitic microstructure of such flanges rests solid during long-time publicity to hovering temperature.
It has exquisite corrosion with the aid of using hovering-purity water, collectively with caustic corrosion. It has appropriate resistance to dry gases at fairly excessive temperatures. The excessive content material of nickel of such flanges gives tremendous resistance to chloride strain corrosion cracking. It suggests hovering tiers of resistance to strain-corrosion cracking. It has Exceptional Corrosion Resistance at Elevated Temperatures. It affords the wished grouping of right weldability and excessive energy below an intensive series of temperatures. Super Duplex Steel ANSI B16.5 Class 1500 Welding Neck Flanges has a few exquisite capabilities which include most useful performance, long lasting end and exactly engineered. The excessive chromium and nickel content material of such flanges provide tremendous resistance to carburization and oxidation.
Largest Manufacturer & Supplier of ANSI B16.5 Class 1500 Welding Neck Flange Threaded, ANSI B16.5 Class 1500 Weld Neck Flange Standards, DIN 2635 Weld Neck Flange, EN1092-1 Weld Neck Flange in Mumbai, India.
Specification Of ANSI B16.5 Class 1500 Weld Neck Flange
| ANSI B16.5 Class 1500 Weld Neck Flange Standards | ANSI B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ANSI Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JIS B2220, BS1560-3.1, API7S-15, API7S-43, API 605, EN1092 |
|---|---|
| ANSI B16.5 Class 1500 Weld Neck Flange Pressure Rating ANSI | Class 1500 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| ANSI B16.5 ANSI B16.5 Class 1500 Weld Neck Flange Size Chart | 1/2″ (15 NB) to 48″ (1200 NB) DN10~DN5000 |
| ANSI B16.5 Class 1500 Weld Neck Flange Pressure Calculation in DIN | 6 Bar, 10Bar, 16Bar, 25Bar, 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Most common types of ANSI B16.5 Class 1500 Weld Neck Flange | Forged / Threaded / Screwed / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
| Special design | As per your drawing
AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Manufacturer of | ANSI, DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ANSI B16.5 Class 1500 Weld Neck Flange : -BS Flange, EN Flange, API 6A Flanges, ANSI Flanges, ANSI Flanges, DIN Flanges, EN1092-1 Flanges, UNI Flanges, JIS/ KS Flanges, BS4504 Flanges, GB Flanges, AWWA C207 Flanges, GOST Flanges, PSI Flangse
|
| ANSI B16.5 Class 1500 Weld Neck Flange Uses & application |
|
| Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Manufacturing ANSI B16.5 Stainless Steel Class 1500 Welding Neck Flanges Specification
| Nominal Pipe Size | Outside Diameter (O) | Thickness (T) | Raised Face Diameter (R) | Length Thru Hub (Y) | Point of Weld (A) | Hub Diameter (X) | Bore (B) | Approximate Weight (lbs) | Bolt Circle (C) | Number of Holes | Diameter of Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 4.75 | 0.88 | 1.38 | 2.38 | 0.84 | 1.50 | Specified by purchaser | 5 | 3.25 | 4 | 0.88 |
| 3/4 | 5.13 | 1.00 | 1.69 | 2.75 | 1.05 | 1.75 | Specified by purchaser | 6 | 3.50 | 4 | 0.88 |
| 1 | 5.88 | 1.13 | 2.00 | 2.88 | 1.32 | 2.06 | Specified by purchaser | 9 | 4.00 | 4 | 1.00 |
| 1 1/4 | 6.25 | 1.13 | 2.50 | 2.88 | 1.66 | 2.50 | Specified by purchaser | 10 | 4.38 | 4 | 1.00 |
| 1 1/2 | 7.00 | 1.25 | 2.88 | 3.25 | 1.90 | 2.75 | Specified by purchaser | 13 | 4.88 | 4 | 1.13 |
| 2 | 8.50 | 1.50 | 3.63 | 4.00 | 2.38 | 4.13 | Specified by purchaser | 25 | 6.50 | 8 | 1.00 |
| 2 1/2 | 9.63 | 1.63 | 4.13 | 4.06 | 2.88 | 4.88 | Specified by purchaser | 36 | 7.50 | 8 | 1.13 |
| 3 | 10.50 | 1.88 | 5.00 | 4.63 | 3.50 | 5.25 | Specified by purchaser | 48 | 8.00 | 8 | 1.25 |
| 4 | 12.25 | 2.13 | 6.19 | 4.88 | 4.50 | 6.38 | Specified by purchaser | 73 | 9.50 | 8 | 1.38 |
| 5 | 14.75 | 2.88 | 7.31 | 6.13 | 5.56 | 7.75 | Specified by purchaser | 130 | 11.50 | 8 | 1.63 |
| 6 | 15.50 | 3.25 | 8.50 | 6.75 | 6.63 | 9.00 | Specified by purchaser | 165 | 12.50 | 12 | 1.50 |
| 8 | 19.00 | 3.63 | 10.63 | 8.38 | 8.63 | 11.50 | Specified by purchaser | 275 | 15.50 | 12 | 1.75 |
| 10 | 23.00 | 4.25 | 12.75 | 10.00 | 10.75 | 14.50 | Specified by purchaser | 455 | 19.00 | 12 | 2.00 |
| 12 | 26.50 | 4.88 | 15.00 | 11.13 | 12.75 | 17.75 | Specified by purchaser | 690 | 22.50 | 16 | 2.13 |
| 14 | 29.50 | 5.25 | 16.25 | 11.75 | 14.00 | 19.50 | Specified by purchaser | 940 | 25.00 | 16 | 2.38 |
| 16 | 32.50 | 5.75 | 18.50 | 12.25 | 16.00 | 21.75 | Specified by purchaser | 1250 | 27.75 | 16 | 2.63 |
| 18 | 36.00 | 6.38 | 21.00 | 12.88 | 18.00 | 23.50 | Specified by purchaser | 1625 | 30.50 | 16 | 2.88 |
| 20 | 38.75 | 7.00 | 23.00 | 14.00 | 20.00 | 25.25 | Specified by purchaser | 2050 | 32.75 | 16 | 3.13 |
| 24 | 46.00 | 8.00 | 27.25 | 16.00 | 24.00 | 30.00 | Specified by purchaser | 3325 | 39.00 | 16 | 3.63 |
ANSI B16.5 Class 1500 Weld Neck Flanges Dimensions & Weight Chart
| Class 1500 Weld Neck Flange Dimensions | |||||||||||
| Size in Inch | Size in mm | Outer Diameter | Flange Thickness | Hub OD | Weld Neck OD | Welding Neck Length | Bore | RF Diameter | RF Height | PCD | Weld Face |
| A | B | C | D | E | F | G | H | I | J | ||
| 1/2 | 15 | 120 | 22.3 | 38 | 21.3 | 60 | Refer Note | 34.9 | 7 | 82.6 | 1.6 |
| 3/4 | 20 | 130 | 25.4 | 44 | 26.7 | 70 | 42.9 | 7 | 88.9 | 1.6 | |
| 1 | 25 | 150 | 28.6 | 52 | 33.4 | 73 | 50.8 | 7 | 101.6 | 1.6 | |
| 1 1/4 | 32 | 160 | 28.6 | 64 | 42.2 | 73 | 63.5 | 7 | 111.1 | 1.6 | |
| 1 1/2 | 40 | 180 | 31.8 | 70 | 48.3 | 83 | 73 | 7 | 123.8 | 1.6 | |
| 2 | 50 | 215 | 38.1 | 105 | 60.3 | 102 | 92.1 | 7 | 165.1 | 1.6 | |
| 2 1/2 | 65 | 245 | 41.3 | 124 | 73 | 105 | 104.8 | 7 | 190.5 | 1.6 | |
| 3 | 80 | 265 | 47.7 | 133 | 88.9 | 117 | 127 | 7 | 203.2 | 1.6 | |
| 4 | 100 | 310 | 54 | 162 | 114.3 | 124 | 157.2 | 7 | 241.3 | 1.6 | |
| 5 | 125 | 375 | 73.1 | 197 | 141.3 | 156 | 185.7 | 7 | 292.1 | 1.6 | |
| 6 | 150 | 395 | 82.6 | 229 | 168.3 | 171 | 215.9 | 7 | 317.5 | 1.6 | |
| 8 | 200 | 485 | 92.1 | 292 | 219.1 | 213 | 269.9 | 7 | 393.7 | 1.6 | |
| 10 | 250 | 585 | 108 | 368 | 273 | 254 | 323.8 | 7 | 482.6 | 1.6 | |
| 12 | 300 | 675 | 123.9 | 451 | 323.8 | 283 | 381 | 7 | 571.5 | 1.6 | |
| 14 | 350 | 750 | 133.4 | 495 | 355.6 | 298 | 412.8 | 7 | 635 | 1.6 | |
| 16 | 400 | 825 | 146.1 | 552 | 406.4 | 311 | 469.9 | 7 | 704.8 | 1.6 | |
| 18 | 450 | 915 | 162 | 597 | 457 | 327 | 533.4 | 7 | 774.7 | 1.6 | |
| 20 | 500 | 985 | 177.8 | 641 | 508 | 356 | 584.2 | 7 | 831.8 | 1.6 | |
| 24 | 600 | 1170 | 203.2 | 762 | 610 | 406 | 692.2 | 7 | 990.6 | 1.6 | |
B16.5 Class 1500 Welding Neck Flange Material
| Carbon Steel ANSI B16.5 Class 1500 Weld Neck Flange | ASTM/ANSI A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ANSI SA105, A105N, ASTM A350 LF2 / ANSI SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
| Stainless Steel ANSI B16.5 Class 1500 Weld Neck Flange | ASTM/ANSI A/SA182 F304, F304L, F316, F316L, ASTM/ANSI A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
| Alloy Steel ANSI B16.5 Class 1500 Weld Neck Flange | ASTM A182 / ANSI SA182 F5, F9, F11, F12, F22, F91 |
| Titanium ANSI B16.5 Class 1500 Weld Neck Flange | ASTM B381 / ANSI SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
| Copper ANSI B16.5 Class 1500 Weld Neck Flange | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
| Copper Nickel ANSI B16.5 Class 1500 Weld Neck Flange | ASTM / ANSI SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
| Brass ANSI B16.5 Class 1500 Weld Neck Flange | 3602 / 2604 / H59 / H62 / etc. |
| Inconel ANSI B16.5 Class 1500 Weld Neck Flange | ASTM B564 / ANSI SB564, Inconel 600, 601, 625, 718, 783, 690, x750 ANSI B16.5 Class 1500 Weld Neck Flange |
| Hastelloy ANSI B16.5 Class 1500 Weld Neck Flange | ASTM B564 / ANSI SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
| Monel ANSI B16.5 Class 1500 Weld Neck Flange | ASTM B564 / ANSI SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
| Alloy 20 ANSI B16.5 Class 1500 Weld Neck Flange | ASTM B462 / ANSI SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
| Aluminium ANSI B16.5 Class 1500 Weld Neck Flange | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
| Nickel ANSI B16.5 Class 1500 Weld Neck Flange | ASTM B564 / ANSI SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
| Duplex ANSI B16.5 Class 1500 Weld Neck Flange | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Super Duplex ANSI B16.5 Class 1500 Weld Neck Flange | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Incoloy ANSI B16.5 Class 1500 Weld Neck Flange | ASTM B564 / ANSI SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
| 254 Smo ANSI B16.5 Class 1500 Weld Neck Flange | ASTM A182 / ANSI SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
| Nimonic ANSI B16.5 Class 1500 Weld Neck Flange | Nimonic 75, Nimonic 80A, Nimonic 90 |
| Other ANSI B16.5 Class 1500 Weld Neck Flange material | Tin bronze, Aluminum bronze, Lead bronze |
ANSI B16.5 #1500 Weld Neck Flange Schedule Chart
| WELDING NECK FLANGES BORES (in inchines) | ||||||||||||||
| Nom Pipe Size |
Outside Diam |
Sched 10 |
Sched 20 |
Sched 30 |
Std. Wall |
Sched 40 |
Sched 60 |
Extra Strong |
Sched 80 |
Sched 100 |
Sched 120 |
Sched 140 |
Sched 160 |
Double Extra Strong |
| 1/2” | 0.840 | 0.674 | – | – | 0.622 | 0.622 | – | 0.546 | 0.546 | – | – | – | 0.464 | 0.252 |
| 3/4” | 1.050 | 0.884 | – | – | 0.824 | 0.824 | – | 0.742 | 0.742 | – | – | – | 0.612 | 0.434 |
| 1” | 1.315 | 1.097 | – | – | 1.049 | 1.049 | – | 0.957 | 0.957 | – | – | – | 0.815 | 0.599 |
| 1.1/4” | 1.660 | 1.442 | – | – | 1.380 | 1.380 | – | 1.278 | 1.278 | – | – | – | 1.160 | 0.896 |
| 1.1/2” | 1.900 | 1.682 | – | – | 1.610 | 1.610 | – | 1.500 | 1.500 | – | – | – | 1.338 | 1.100 |
| 2” | 2.375 | 2.157 | – | – | 2.067 | 2.067 | – | 1.939 | 1.939 | – | – | – | 1.687 | 1.503 |
| 2.1/2” | 2.875 | 2.635 | – | – | 2.469 | 2.469 | – | 2.323 | 2.323 | – | – | – | 2.125 | 1.771 |
| 3” | 3.500 | 3.260 | – | – | 3.068 | 3.068 | – | 2.900 | 2.900 | – | – | – | 2.624 | 2.300 |
| 3-1/2” | 4.000 | 3.760 | – | – | 3.548 | 3.548 | – | 3.364 | 3.364 | – | – | – | – | 2.728 |
| 4” | 4.500 | 4.260 | – | – | 4.026 | 4.026 | – | 3.826 | 3.826 | – | 3.624 | – | 3.438 | 3.152 |
| 5” | 5.563 | 5.295 | – | – | 5.047 | 5.047 | – | 4.813 | 4.813 | – | 4.563 | – | 4.313 | 4.063 |
| 6” | 6.625 | 6.357 | – | – | 6.065 | 6.065 | – | 5.761 | 5.761 | – | 5.501 | – | 5.187 | 4.897 |
| 8” | 8.625 | 8.329 | 8.125 | 8.071 | 7.981 | 7.981 | 7.813 | 7.625 | 7.625 | 7.437 | 7.187 | 7.001 | 6.813 | 6.875 |
| 10” | 10.750 | 10.420 | 10.250 | 10.136 | 10.020 | 10.020 | 9.750 | 9.750 | 9.562 | 9.312 | 9.062 | 8.750 | 8.500 | 8.750 |
| 12” | 12.750 | 12.390 | 12.250 | 12.090 | 12.000 | 11.938 | 11.626 | 11.750 | 11.374 | 11.062 | 10.750 | 10.500 | 10.126 | 10.750 |
| 14” | 14.000 | 13.500 | 13.376 | 13.250 | 13.250 | 13.124 | 12.812 | 13.000 | 12.500 | 12.124 | 11.814 | 11.500 | 11.188 | – |
| 16” | 16.000 | 15.500 | 15.376 | 15.250 | 15.250 | 15.000 | 14.688 | 15.000 | 14.312 | 13.938 | 13.564 | 13.124 | 12.812 | – |
| 18” | 18.000 | 17.500 | 17.376 | 17.124 | 17.250 | 16.876 | 16.500 | 17.000 | 16.124 | 15.688 | 15.250 | 14.876 | 14.438 | – |
| 20” | 20.000 | 19.500 | 19.250 | 19.000 | 19.250 | 18.812 | 18.376 | 19.000 | 17.938 | 17.438 | 17.000 | 16.500 | 16.062 | – |
| 24” | 24.000 | 23.500 | 23.250 | 22.876 | 23.250 | 22.624 | 22.062 | 23.000 | 21.562 | 20.938 | 20.376 | 19.876 | 19.312 | – |
| 30” | 30.000 | 29.376 | 29.000 | 28.750 | 29.250 | – | – | 29.000 | – | – | – | – | – | – |
| 36” | 36.000 | 35.376 | 35.000 | 34.750 | 35.250 | 34.500 | – | 35.000 | – | – | – | – | – | – |
| 42” | 42.000 | – | – | – | 41.250 | – | – | 41.000 | – | – | – | – | – | – |
Dimension Tolerance Class 1500 Welding Neck Flanges
| Outside Diameter | When O is 24″ or less. When O is over 24″. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
| Diameter of Contact Face | 0.06″ (1.6 mm) raised face. 0.25″ (6.4 mm) raised face. |
±0.03″ ±0.02″ | ±0.8 mm | ±0.5mm |
| Diameter of Hub at Point of Welding | NPS 5 and smaller. NPS 6 and larger. |
+0.09″, -0.03″ +0.16″, -0.03″ | +2.4 mm, -0.8mm | +4.0 mm, -0.8 mm |
| Inside Diameter | NPS 10, 12, 18, 20 and larger. | +0.03″ +0.06″ +0.12″, -0.06″ | +0.8 mm +1.6 mm | +3.2 mm, -1.6 mm |
| Diameter of Hub at Base | Hub Base is 24″or less. Hub Base is over 24″. |
+0.06″ +0.12″ | +1.6 mm | +3.2 mm |
| Thickness | NPS 18 and smaller. NPS 20 and larger. |
+0.12″ +0.19″ | +3.2 mm | +4.8 mm |
| Drilling and Facings | Bolt circle diameter Bolt Hole Spacing | ±0.06″ ±0.03″ | ±1.6 mm | ±0.8 mm |
| Eccentricity of Bolt Circle and Facing | NPS 2 1/2 and smaller. NPS 3 and larger. |
±0.03″ ±0.06″ | ±0.8 mm | ±1.6 mm |
| Length Through Hub | NPS 10 and smaller. NPS 12 and larger. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
Types of ANSI B16.5 Alloy Steel Class 1500 Weld Neck Flanges We Supply
| BS4504 Weld Neck Flange #1500 | Class 1500 BS3293 Weld Neck Flange |
| ANSI B16.5 Class 1500 Weld Neck Flange Pn 64 | ANSI B16.5 #1500 Weld Neck Flange Dn150 |
| ANSI B16.5 Class 1500 Weld Neck Flange Din 2633 | ANSI B16.5 Class 1500 Weld Neck Flange Din 2576 |
| ANSI B16.5 #1500 Weld Neck Flange CF3M | Din 2628 #1500 Weld Neck Flange |
| Class 1500 EN1092-1 WNRF Flanges | ANSI B16.5, SCH 40 Class 1500 WNRF Flanges |