ANSI B16.5 Class 300 Slip On Flanges
India’s Leading ANSI B16.5 Alloy Steel Class 300 Slip-On Flanges Supplier in india, Class 300 SORF Flange at Low Price , DIN 2527 Slip-On Flange, BS4504 Slip On Flange, Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a prominent exporter and trader of ANSI B16.5 Class 300 Slip-On Flanges, which holds extra resistance and corrosion strength at excessive temperatures.
Meanwhile, the principle characteristic of such flanges is to alternate the waft and route within the route of one hundred eighty diploma angle. They even have a midpoint-to-midpoint duration, collectively with double the interchangeable ninety diploma angle. Copper Nickel ANSI B16.5 Class 300 Slip-On Flanges are used as a connection factor among lengths of pipes for to make alter within the waft and route with inside the pipe. Flange within the piping machine allocate the immediately loss of participation of the exacting element concerned. It is one of the maximum frequently used for commercial pipe becoming that allows signing up for tubes or pipes of various diameters.
They are at duration used to shield the ends of pipe, collectively with preserving out the dirt and different overseas material. However, the principle cause of the use of such flanges is to have a water resistant connection. Titanium Alloy ANSI B16.5 Class 300 Slip-On Flanges are crafted from substantial pipe substances that consist of excessive and occasional yield of steels. They are made from a very excessive trendy great uncooked material, and are favoured for its long-lasting life. A complete product variety in such flanges consists of formable and soaring-electricity, weather-annoying and boron steels. In different words, it may disjoint pipes very easily.
Meanwhile, soaring-electricity and formable steels recommend particular efficiency residences which can be being related by way of specific formability. The standard choice of such flanges is formable with inside the liberation state, collectively with rather weather-annoying and effective within the bursting state. It gives a notable corrosion resistance and concurrently continues weldability alongside formability. Alloy 20 ANSI B16.5 Class 300 Slip-On Flanges is typically used for pumps, valves, marine applications, and chemical apparatus. Further, its miles frequently known as a warmth treatable stainless steel, however have a few decrease corrosion resistances than different grades. It is made from different substances and iron by way of excessive magnetic permeability.
Largest Manufacturer & Supplier of ANSI B16.5 Class 300 Slip-On Flange Standards, DIN 2641 Slip-On Flange, ANSI B16.5 Class 300 Slip-On Flange CF3 Supplier, EN1092-1 Slip-On Flange in Mumbai, India.
Specification Of ANSI B16.5 Class 300 Slip-On Flange
ANSI B16.5 Class 300 Slip-On Flange Standards | ANSI B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ANSI Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JIS B2220, BS1560-3.1, API7S-15, API7S-43, API 605, EN1092 |
---|---|
ANSI B16.5 Class 300 Slip-On Flange Pressure Rating ANSI | Class 300 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
ANSI B16.5 ANSI B16.5 Class 300 Slip-On Flange Size Chart | 1/2″ (15 NB) to 48″ (1200 NB) DN10~DN5000 |
ANSI B16.5 Class 300 Slip-On Flange Pressure Calculation in DIN | 6 Bar, 10Bar, 16Bar, 25Bar, 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
Most common types of ANSI B16.5 Class 300 Slip-On Flange | Forged / Threaded / Screwed / Plate |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Production technique |
|
Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
Special design | As per your drawing
AS, ANSI, BS, DIN and JIS |
Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
Origin | Indian / West Europe / Japan / USA / Korean |
Manufacturer of | ANSI, DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ANSI B16.5 Class 300 Slip-On Flange : -BS Flange, EN Flange, API 6A Flanges, ANSI Flanges, ANSI Flanges, DIN Flanges, EN1092-1 Flanges, UNI Flanges, JIS/ KS Flanges, BS4504 Flanges, GB Flanges, AWWA C207 Flanges, GOST Flanges, PSI Flangse
|
ANSI B16.5 Class 300 Slip-On Flange Uses & application |
|
Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Manufacturing ANSI B16.5 Class 300 Slip On Flanges Specification
Nominal Pipe Size | Outside Diameter (O) | Thickness (T) | Raised Face Diameter (R) | Length Thru Hub (Y) | Point of Weld (A) | Hub Diameter (X) | Bore (B) | Approximate Weight (lbs) | Bolt Circle (C) | Number of Holes | Diameter of Holes |
---|---|---|---|---|---|---|---|---|---|---|---|
1/2 | 3.75 | 0.56 | 1.38 | 2.06 | 0.84 | 1.50 | 0.62 | 2 | 2.63 | 4 | 0.63 |
3/4 | 4.63 | 0.63 | 1.69 | 2.25 | 1.05 | 1.88 | 0.82 | 3 | 3.25 | 4 | 0.75 |
1 | 4.88 | 0.69 | 2.00 | 2.44 | 1.32 | 2.13 | 1.05 | 4 | 3.50 | 4 | 0.75 |
1 1/4 | 5.25 | 0.75 | 2.50 | 2.56 | 1.66 | 2.50 | 1.38 | 5 | 3.88 | 4 | 0.75 |
1 1/2 | 6.13 | 0.81 | 2.88 | 2.69 | 1.90 | 2.75 | 1.61 | 7 | 4.50 | 4 | 0.88 |
2 | 6.50 | 0.88 | 3.63 | 2.75 | 2.38 | 3.31 | 2.07 | 9 | 5.00 | 8 | 0.75 |
2 1/2 | 7.50 | 1.00 | 4.13 | 3.00 | 2.88 | 3.94 | 2.47 | 12 | 5.88 | 8 | 0.88 |
3 | 8.25 | 1.13 | 5.00 | 3.13 | 3.50 | 4.63 | 3.07 | 15 | 6.63 | 8 | 0.88 |
3 1/2 | 9.00 | 1.19 | 5.50 | 3.19 | 4.00 | 5.25 | 3.55 | 18 | 7.25 | 8 | 0.88 |
4 | 10.00 | 1.25 | 6.19 | 3.38 | 4.50 | 5.75 | 4.03 | 25 | 7.88 | 8 | 0.88 |
5 | 11.00 | 1.38 | 7.31 | 3.88 | 5.56 | 7.00 | 5.05 | 32 | 9.25 | 8 | 0.88 |
6 | 12.50 | 1.44 | 8.50 | 3.88 | 6.63 | 8.13 | 6.07 | 42 | 10.63 | 12 | 0.88 |
8 | 15.00 | 1.63 | 10.63 | 4.38 | 8.63 | 10.25 | 7.98 | 67 | 13.00 | 12 | 1.00 |
10 | 17.50 | 1.88 | 12.75 | 4.63 | 10.75 | 12.63 | 10.02 | 91 | 15.25 | 16 | 1.13 |
12 | 20.50 | 2.00 | 15.00 | 5.13 | 12.75 | 14.75 | 12.00 | 140 | 17.75 | 16 | 1.25 |
14 | 23.00 | 2.13 | 16.25 | 5.63 | 14.00 | 16.75 | 13.25 | 180 | 20.25 | 20 | 1.25 |
16 | 25.50 | 2.25 | 18.50 | 5.75 | 16.00 | 19.00 | 15.25 | 250 | 22.50 | 20 | 1.38 |
18 | 28.00 | 2.38 | 21.00 | 6.25 | 18.00 | 21.00 | 17.25 | 320 | 24.75 | 24 | 1.38 |
20 | 30.50 | 2.50 | 23.00 | 6.38 | 20.00 | 23.13 | 19.25 | 400 | 27.00 | 24 | 1.38 |
22 | 33.00 | 2.63 | 25.25 | 6.50 | 22.00 | 25.25 | 21.25 | 465 | 29.25 | 24 | 1.63 |
24 | 36.00 | 2.75 | 27.25 | 6.63 | 24.00 | 27.63 | 23.25 | 580 | 32.00 | 24 | 1.63 |
ANSI B16.5 Class 300 Slip-On Flanges Dimensions & Weight Chart
ANSI B16.5 300lb/sq.in. Flange SORF | ||||||||||
ø | D | b | g | m | J | h | k | Holes | l | Kg. |
1/2″ | 95,6 | 14,3 | 34,9 | 38,1 | 22,3 | 22,2 | 66,7 | 4 | 15,9 | 0,700 |
3/4″ | 117,5 | 15,9 | 42,9 | 47,6 | 27,7 | 25,4 | 82,5 | 4 | 19,0 | 1,100 |
1″ | 123,8 | 17,5 | 50,8 | 54,0 | 34,5 | 27,0 | 88,9 | 4 | 19,0 | 1,400 |
1 1/4″ | 133,3 | 19,0 | 63,5 | 63,5 | 43,2 | 27,0 | 98,4 | 4 | 19,0 | 1,800 |
1 1/2″ | 155,6 | 20,6 | 73,0 | 69,8 | 49,5 | 30,2 | 114,3 | 4 | 22,2 | 2,600 |
2″ | 165,1 | 22,2 | 92,1 | 84,1 | 62,0 | 33,3 | 127,0 | 8 | 19,0 | 3,400 |
2 1/2″ | 190,5 | 25,4 | 104,8 | 100,0 | 74,7 | 38,1 | 149,2 | 8 | 22,2 | 4,400 |
3″ | 209,5 | 28,6 | 127,0 | 117,5 | 90,7 | 42,9 | 168,3 | 8 | 22,2 | 6,100 |
3 1/2″ | 228,6 | 30,2 | 139,7 | 133,3 | 103,4 | 44,4 | 184,1 | 8 | 22,2 | 7,500 |
4″ | 254,0 | 31,7 | 157,2 | 146,0 | 116,1 | 47,6 | 200,0 | 8 | 22,2 | 10,100 |
5″ | 279,4 | 34,9 | 185,7 | 177,8 | 143,8 | 50,8 | 234,9 | 8 | 22,2 | 12,500 |
6″ | 317,5 | 36,5 | 215,9 | 206,4 | 170,7 | 52,4 | 269,9 | 12 | 22,2 | 14,100 |
8″ | 381,0 | 41,3 | 269,9 | 260,3 | 221,5 | 61,9 | 330,2 | 12 | 25,4 | 24,800 |
10″ | 444,5 | 47,6 | 323,8 | 320,7 | 276,3 | 66,7 | 387,3 | 16 | 28,6 | 37,100 |
12″ | 520,7 | 50,8 | 381,0 | 374,6 | 327,1 | 73,0 | 450,8 | 16 | 31,7 | 50,000 |
14″ | 584,2 | 54,0 | 412,7 | 425,4 | 359,1 | 76,2 | 514,3 | 20 | 31,7 | 70,000 |
16″ | 647,7 | 57,1 | 469,9 | 482,6 | 410,5 | 82,5 | 571,5 | 20 | 34,9 | 90,000 |
18″ | 711,2 | 60,3 | 533,4 | 533,4 | 461,8 | 88,9 | 628,6 | 24 | 34,9 | 112,000 |
20″ | 774,7 | 63,5 | 584,2 | 584,2 | 513,1 | 95,2 | 685,8 | 24 | 34,9 | 133,000 |
22″ | 838,2 | 66,7 | 641,2 | 641,2 | 564,4 | 101,6 | 742,9 | 24 | 41,3 | 197,000 |
24″ | 914,4 | 69,8 | 692,1 | 701,7 | 615,9 | 106,4 | 812,8 | 24 | 41,3 | 208,000 |
B16.5 Class 300 Slip On Flange Material
Carbon Steel ANSI B16.5 Class 300 Slip-On Flange | ASTM/ANSI A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ANSI SA105, A105N, ASTM A350 LF2 / ANSI SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
Stainless Steel ANSI B16.5 Class 300 Slip-On Flange | ASTM/ANSI A/SA182 F304, F304L, F316, F316L, ASTM/ANSI A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
Alloy Steel ANSI B16.5 Class 300 Slip-On Flange | ASTM A182 / ANSI SA182 F5, F9, F11, F12, F22, F91 |
Titanium ANSI B16.5 Class 300 Slip-On Flange | ASTM B381 / ANSI SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
Copper ANSI B16.5 Class 300 Slip-On Flange | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
Copper Nickel ANSI B16.5 Class 300 Slip-On Flange | ASTM / ANSI SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
Brass ANSI B16.5 Class 300 Slip-On Flange | 3602 / 2604 / H59 / H62 / etc. |
Inconel ANSI B16.5 Class 300 Slip-On Flange | ASTM B564 / ANSI SB564, Inconel 600, 601, 625, 718, 783, 690, x750 ANSI B16.5 Class 300 Slip-On Flange |
Hastelloy ANSI B16.5 Class 300 Slip-On Flange | ASTM B564 / ANSI SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
Monel ANSI B16.5 Class 300 Slip-On Flange | ASTM B564 / ANSI SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
Alloy 20 ANSI B16.5 Class 300 Slip-On Flange | ASTM B462 / ANSI SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
Aluminium ANSI B16.5 Class 300 Slip-On Flange | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
Nickel ANSI B16.5 Class 300 Slip-On Flange | ASTM B564 / ANSI SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
Duplex ANSI B16.5 Class 300 Slip-On Flange | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Super Duplex ANSI B16.5 Class 300 Slip-On Flange | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Incoloy ANSI B16.5 Class 300 Slip-On Flange | ASTM B564 / ANSI SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
254 Smo ANSI B16.5 Class 300 Slip-On Flange | ASTM A182 / ANSI SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
Nimonic ANSI B16.5 Class 300 Slip-On Flange | Nimonic 75, Nimonic 80A, Nimonic 90 |
Other ANSI B16.5 Class 300 Slip-On Flange material | Tin bronze, Aluminum bronze, Lead bronze |
Weight Chart of ANSI B16.5 Class 300 Slip-On Flange
ANSI B16.5 SLIP ON FLANGES WEIGHT (KGS) | ||||||||||||||||||
Nom Pipe Size |
150# | 300# | 600# | 900# | 1500# | 2500# | ||||||||||||
SO | S/O | B/K | SO | S/O | B/K | SO | S/O | B/K | SO | S/O | B/K | SO | S/O | B/K | SO | S/O | B/K | |
1/2” | 0.7 | 0.4 | 0.5 | 0.8 | 0.7 | 0.8 | 0.9 | 0.8 | 0.8 | 2.1 | 1.8 | 1.9 | 2.1 | 1.8 | 1.9 | 3.2 | 3 | 3 |
3/4” | 0.8 | 0.7 | 0.8 | 1.4 | 1.2 | 1.2 | 1.6 | 1.4 | 1.4 | 2.7 | 2.4 | 2.7 | 2.7 | 2.4 | 2.7 | 3.6 | 4 | 4.5 |
1” | 1.1 | 0.8 | 0.9 | 1.7 | 1.4 | 1.5 | 1.9 | 1.7 | 1.7 | 3.9 | 3.6 | 3.7 | 3.9 | 3.6 | 3.7 | 5.4 | 5 | 5 |
1.1/4” | 1.5 | 1.2 | 1.3 | 2.2 | 1.8 | 2 | 2.6 | 2.1 | 2.4 | 4.5 | 4.1 | 4.3 | 4.5 | 4.1 | 4.3 | 7.8 | 8 | 8 |
1.1/2” | 1.8 | 1.4 | 1.6 | 3.2 | 2.7 | 2.9 | 3.6 | 3.1 | 3.4 | 6.2 | 5.4 | 5.9 | 6.2 | 5.4 | 5.9 | 11.5 | 11 | 11 |
2” | 2.7 | 2.2 | 2.6 | 3.6 | 3.2 | 3.5 | 4.7 | 3.9 | 4.4 | 11.3 | 10.5 | 11.3 | 11.3 | 10.5 | 11.3 | 19 | 17 | 17 |
2.1/2” | 4.4 | 3.5 | 4.1 | 5.4 | 4.5 | 5.3 | 4.8 | 5.4 | 6.8 | 16.3 | 15.8 | 16 | 16.3 | 15.8 | 16 | 24 | 25 | 25 |
3” | 5.2 | 3.8 | 5.1 | 7.3 | 5.9 | 7.2 | 8.7 | 7.3 | 8.9 | 15 | 12.3 | 16.8 | 21 | 21.5 | 19.5 | 42.6 | 38 | 39 |
3-1/2” | 6.4 | 5 | 6.5 | 8.9 | 7.5 | 9.2 | 11.6 | 9 | 12.7 | – | – | – | – | – | – | – | – | – |
4” | 7.5 | 5.6 | 7.5 | 11.8 | 10 | 12.2 | 18.4 | 16.5 | 18.6 | 24 | 23.2 | 24.5 | 31.8 | 31 | 33 | 64 | 58 | 60 |
5” | 9.2 | 6.5 | 9.2 | 16 | 12.5 | 16 | 31 | 28.5 | 30.8 | 38.5 | 37.5 | 39.5 | 59 | 58.8 | 60 | 111 | 95 | 101 |
6” | 11.0 | 8.1 | 11.8 | 20.2 | 16.5 | 22 | 37 | 36.2 | 38 | 50 | 48.3 | 51.5 | 72 | 74 | 75 | 171 | 146 | 156 |
8” | 18.4 | 13 | 20.4 | 31.2 | 25.5 | 36 | 54.5 | 51.5 | 62.2 | 85 | 75 | 89 | 124 | 112 | 125 | 261 | 220 | 242 |
10” | 25.5 | 18.4 | 31 | 44.3 | 35 | 55 | 98.5 | 76.2 | 102 | 123 | 110 | 131 | 207 | 184 | 215 | 485 | 420 | 465 |
12” | 37 | 28.5 | 47 | 63.5 | 52 | 82.5 | 105 | 89.5 | 132 | 168 | 146 | 187 | 306 | 264 | 316 | 698 | 590 | 665 |
14” | 51 | 37.5 | 60 | 86 | 73 | 108 | 150 | 102 | 158 | 198 | 172 | 224 | 416 | – | – | – | – | – |
16” | 61.5 | 44.5 | 61 | 112 | 88 | 139 | 177 | 150 | 225 | 225 | 192 | 259 | 567 | – | – | – | – | – |
18” | 71.5 | 54 | 93 | 141 | 115 | 178 | 228 | 180 | 285 | 318 | 272 | 383 | 736 | – | – | – | – | – |
20” | 85 | 72 | 127 | 173 | 139 | 228 | 285 | 231 | 365 | 376 | 330 | 482 | 929 | – | – | – | – | – |
24” | 119 | 95 | 190 | 248 | 212 | 350 | 372 | 330 | 532 | 680 | 632 | 905 | 1504 | – | – | – | – | – |
ANSI B16.5 #300 Slip-On Flange Pressure Ratings
Temp -29 °C |
150 | 300 | 400 | 600 | 900 | 1500 | 2500 |
38 | 19.6 | 51.1 | 68.1 | 102.1 | 153.2 | 255.3 | 425.5 |
50 | 19.2 | 50.1 | 66.8 | 100.2 | 150.4 | 250.6 | 417.7 |
100 | 17.7 | 46.6 | 62.1 | 93.2 | 139.8 | 233 | 388.3 |
150 | 15.8 | 45.1 | 60.1 | 90.2 | 135.2 | 225.4 | 375.6 |
200 | 13.8 | 43.8 | 58.4 | 87.6 | 131.4 | 219 | 365 |
250 | 12.1 | 41.9 | 55.9 | 83.9 | 125.8 | 209.7 | 349.5 |
300 | 10.2 | 39.8 | 53.1 | 79.6 | 119.5 | 199.1 | 331.8 |
325 | 9.3 | 38.7 | 51.6 | 77.4 | 116.1 | 193.6 | 322.6 |
350 | 8.4 | 37.6 | 50.1 | 75.1 | 112.7 | 187.8 | 313 |
375 | 7.4 | 36.4 | 48.5 | 72.7 | 109.1 | 181.8 | 303.1 |
400 | 6.5 | 34.7 | 46.3 | 69.4 | 104.2 | 173.6 | 289.3 |
425 | 5.5 | 28.8 | 38.4 | 57.5 | 86.3 | 143.8 | 239.7 |
450 | 4.6 | 23 | 30.7 | 46 | 69 | 115 | 191.7 |
475 | 3.7 | 17.4 | 23.2 | 34.9 | 52.3 | 87.2 | 145.3 |
500 | 2.8 | 11.8 | 15.7 | 23.5 | 35.3 | 58.8 | 97.9 |
538 | 1.4 | 5.9 | 7.9 | 11.8 | 17.7 | 29.5 | 49.2 |
Temp °C |
150 | 300 | 400 | 600 | 900 | 1500 | 2500 |
ANSI B16.5 #300 Slip-On Flange Schedule Chart
SORF FLANGES BORES (in inchines) | ||||||||||||||
Nom Pipe Size |
Outside Diam |
Sched 10 |
Sched 20 |
Sched 30 |
Std. Wall |
Sched 40 |
Sched 60 |
Extra Strong |
Sched 80 |
Sched 100 |
Sched 120 |
Sched 140 |
Sched 160 |
Double Extra Strong |
1/2” | 0.840 | 0.674 | – | – | 0.622 | 0.622 | – | 0.546 | 0.546 | – | – | – | 0.464 | 0.252 |
3/4” | 1.050 | 0.884 | – | – | 0.824 | 0.824 | – | 0.742 | 0.742 | – | – | – | 0.612 | 0.434 |
1” | 1.315 | 1.097 | – | – | 1.049 | 1.049 | – | 0.957 | 0.957 | – | – | – | 0.815 | 0.599 |
1.1/4” | 1.660 | 1.442 | – | – | 1.380 | 1.380 | – | 1.278 | 1.278 | – | – | – | 1.160 | 0.896 |
1.1/2” | 1.900 | 1.682 | – | – | 1.610 | 1.610 | – | 1.500 | 1.500 | – | – | – | 1.338 | 1.100 |
2” | 2.375 | 2.157 | – | – | 2.067 | 2.067 | – | 1.939 | 1.939 | – | – | – | 1.687 | 1.503 |
2.1/2” | 2.875 | 2.635 | – | – | 2.469 | 2.469 | – | 2.323 | 2.323 | – | – | – | 2.125 | 1.771 |
3” | 3.500 | 3.260 | – | – | 3.068 | 3.068 | – | 2.900 | 2.900 | – | – | – | 2.624 | 2.300 |
3-1/2” | 4.000 | 3.760 | – | – | 3.548 | 3.548 | – | 3.364 | 3.364 | – | – | – | – | 2.728 |
4” | 4.500 | 4.260 | – | – | 4.026 | 4.026 | – | 3.826 | 3.826 | – | 3.624 | – | 3.438 | 3.152 |
5” | 5.563 | 5.295 | – | – | 5.047 | 5.047 | – | 4.813 | 4.813 | – | 4.563 | – | 4.313 | 4.063 |
6” | 6.625 | 6.357 | – | – | 6.065 | 6.065 | – | 5.761 | 5.761 | – | 5.501 | – | 5.187 | 4.897 |
8” | 8.625 | 8.329 | 8.125 | 8.071 | 7.981 | 7.981 | 7.813 | 7.625 | 7.625 | 7.437 | 7.187 | 7.001 | 6.813 | 6.875 |
10” | 10.750 | 10.420 | 10.250 | 10.136 | 10.020 | 10.020 | 9.750 | 9.750 | 9.562 | 9.312 | 9.062 | 8.750 | 8.500 | 8.750 |
12” | 12.750 | 12.390 | 12.250 | 12.090 | 12.000 | 11.938 | 11.626 | 11.750 | 11.374 | 11.062 | 10.750 | 10.500 | 10.126 | 10.750 |
14” | 14.000 | 13.500 | 13.376 | 13.250 | 13.250 | 13.124 | 12.812 | 13.000 | 12.500 | 12.124 | 11.814 | 11.500 | 11.188 | – |
16” | 16.000 | 15.500 | 15.376 | 15.250 | 15.250 | 15.000 | 14.688 | 15.000 | 14.312 | 13.938 | 13.564 | 13.124 | 12.812 | – |
18” | 18.000 | 17.500 | 17.376 | 17.124 | 17.250 | 16.876 | 16.500 | 17.000 | 16.124 | 15.688 | 15.250 | 14.876 | 14.438 | – |
20” | 20.000 | 19.500 | 19.250 | 19.000 | 19.250 | 18.812 | 18.376 | 19.000 | 17.938 | 17.438 | 17.000 | 16.500 | 16.062 | – |
24” | 24.000 | 23.500 | 23.250 | 22.876 | 23.250 | 22.624 | 22.062 | 23.000 | 21.562 | 20.938 | 20.376 | 19.876 | 19.312 | – |
30” | 30.000 | 29.376 | 29.000 | 28.750 | 29.250 | – | – | 29.000 | – | – | – | – | – | – |
36” | 36.000 | 35.376 | 35.000 | 34.750 | 35.250 | 34.500 | – | 35.000 | – | – | – | – | – | – |
42” | 42.000 | – | – | – | 41.250 | – | – | 41.000 | – | – | – | – | – | – |
Dimension Tolerance Class 300 Slip On Flanges
Certificate | Plate Thickness in mm | Width in mm | Length in mm | |
---|---|---|---|---|
Outside Diameter | When O is 24″ or less. When O is over 24″. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
Diameter of Contact Face | 0.06″ (1.6 mm) raised face. 0.25″ (6.4 mm) raised face. |
±0.03″ ±0.02″ | ±0.8 mm | ±0.5mm |
Diameter of Hub at Point of Welding | NPS 5 and smaller. NPS 6 and larger. |
+0.09″, -0.03″ +0.16″, -0.03″ | +2.4 mm, -0.8mm | +4.0 mm, -0.8 mm |
Inside Diameter | NPS 10, 12, 18, 20 and larger. | +0.03″ +0.06″ +0.12″, -0.06″ | +0.8 mm +1.6 mm | +3.2 mm, -1.6 mm |
Diameter of Hub at Base | Hub Base is 24″or less. Hub Base is over 24″. |
+0.06″ +0.12″ | +1.6 mm | +3.2 mm |
Thickness | NPS 18 and smaller. NPS 20 and larger. |
+0.12″ +0.19″ | +3.2 mm | +4.8 mm |
Drilling and Facings | Bolt circle diameter Bolt Hole Spacing | ±0.06″ ±0.03″ | ±1.6 mm | ±0.8 mm |
Eccentricity of Bolt Circle and Facing | NPS 2 1/2 and smaller. NPS 3 and larger. |
±0.03″ ±0.06″ | ±0.8 mm | ±1.6 mm |
Length Through Hub | NPS 10 and smaller. NPS 12 and larger. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
Types of ANSI B16.5 Alloy Steel Class 300 Slip-On Flanges We Supply
ANSI B16.5 300LB SO Flange Supplier in Mumbai | 300lb Slip-On Flange Manufacturer in India |
ANSI B16.5 Class 300 Slip-On Flange Pn40 | ANSI B16.5 Class 300 Slip-On Flange Pn 160 |
ANSI B16.5 Class 300 Slip-On Flange Din 2633 | ANSI B16.5 Class 300 Slip-On Flange Din 2576 |
ANSI B16.5 #300 Slip-On Flange CF3M | Din 2628 #300 Slip-On Flange |