ANSI B16.5 Class 900 Welding Neck Flanges
India’s Leading ANSI B16.5 Alloy Steel Class 900 Weld Neck Flanges Supplier in india, DIN 2527 Welding Neck Flange at Low Price, Buy WNRF Class 900 Flanges DN65,Class 900 BS1560 WN Flanges Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a prominent distributor and manufacturer of ANSI B16.5 Class 900 Welding Neck Flanges, which are ferromagnetic and has relatively low strength resistivity.
It has a low annealed tension and extraordinarily low work-toughening charge. It is utilized in meals managing machinery, well-known corrosion-resistant systems and parts, caustic solutions, etc. It is selected by means of the past 315 Degree C, for the cause that of its improved resistance to creep. The boundaries of such Copper Nickel ANSI B16.5 Class 900 Welding Neck Flanges are merged right into solitary twin chemistry that consequences in a wonderful alloy through the best capabilities. It has a few extremely good capabilities to provide including hard construction, lightweight, dimensionally accurate, and so on.
To rule out each prospect of defect, we test such flanges on positive regulations of quality. It is a commercially unalloyed nickel that presentations extremely good corrosion resistance and has quite low electric resistivity. It is a low carbon modification that has determined packages within the digital industries at temperatures until 649 Degree C. It is a commercially natural material that indicates incredible corrosion resistance. However, Titanium Alloy ANSI B16.5 Class 900 Welding Neck Flanges has some of extremely good capabilities to provide including lengthy life, nice finish, exactly engineered, low maintenance, excessive quality, smooth to install, and so on. They are commonly utilized in Procedures in which Sodium Hydroxide is used, Synthetic Fiber Production, Food Dispensation, and so on.
Other useful traits of such flanges are its magnetostrictive and magnetic capabilities, excessive electric and thermal conductivities, low vapor stress and occasional fuelling content. It has some of extremely good capabilities to provide including Corrosion resistant, Sturdy, Fine finish, and so on. It has a low annealed tension and really low work-toughening charge this is wanted for setting up tactics including spinning, coining, deep drawing, etc. Alloy 20 ANSI B16.5 Class 900 Welding Neck Flanges offers corrosion resistance in impartial and decreasing media alongside in oxidizing environments provided that the oxidizing media allows the established order of an unreceptive oxide film.
Largest Manufacturer & Supplier of ANSI B16.5 Class 900 Weld Neck Flange Standards, DIN 2641 Weld Neck Flange, EN1092-1 Weld Neck Flange Supplier, CF8M Class 900 Welding Neck Flanges in Mumbai, India.
Specification Of ANSI B16.5 Class 900 Weld Neck Flange
| ANSI B16.5 Class 900 Weld Neck Flange Standards | ANSI B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ANSI Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JIS B2220, BS1560-3.1, API7S-15, API7S-43, API 605, EN1092 |
|---|---|
| ANSI B16.5 Class 900 Weld Neck Flange Pressure Rating ANSI | Class 900 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| ANSI B16.5 ANSI B16.5 Class 900 Weld Neck Flange Size Chart | 1/2″ (15 NB) to 48″ (1200 NB) DN10~DN5000 |
| ANSI B16.5 Class 900 Weld Neck Flange Pressure Calculation in DIN | 6 Bar, 10Bar, 16Bar, 25Bar, 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Most common types of ANSI B16.5 Class 900 Weld Neck Flange | Forged / Threaded / Screwed / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
| Special design | As per your drawing
AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Manufacturer of | ANSI, DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ANSI B16.5 Class 900 Weld Neck Flange : -BS Flange, EN Flange, API 6A Flanges, ANSI Flanges, ANSI Flanges, DIN Flanges, EN1092-1 Flanges, UNI Flanges, JIS/ KS Flanges, BS4504 Flanges, GB Flanges, AWWA C207 Flanges, GOST Flanges, PSI Flangse
|
| ANSI B16.5 Class 900 Weld Neck Flange Uses & application |
|
| Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Manufacturing ANSI B16.5 Stainless Steel Class 900 Welding Neck Flanges Specification
| Nominal Pipe Size | Outside Diameter (O) | Thickness (T) | Raised Face Diameter (R) | Length Thru Hub (Y) | Hub Diameter (X) | Bore (B) | Approximate Weight (lbs) | Bolt Circle (C) | Number of Holes | Diameter of Holes |
|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 4.75 | 0.88 | 1.38 | 2.38 | 1.50 | Specified by purchaser | 5 | 3.25 | 4 | 0.88 |
| 3/4 | 5.13 | 1.00 | 1.69 | 2.75 | 1.75 | Specified by purchaser | 6 | 3.50 | 4 | 0.88 |
| 1 | 5.88 | 1.13 | 2.00 | 2.88 | 2.06 | Specified by purchaser | 9 | 4.00 | 4 | 1.00 |
| 1 1/4 | 6.25 | 1.13 | 2.50 | 2.88 | 2.50 | Specified by purchaser | 10 | 4.38 | 4 | 1.00 |
| 1 1/2 | 7.00 | 1.25 | 2.88 | 3.25 | 2.75 | Specified by purchaser | 13 | 4.88 | 4 | 1.13 |
| 2 | 8.50 | 1.50 | 3.63 | 4.00 | 4.13 | Specified by purchaser | 25 | 6.50 | 8 | 1.00 |
| 2 1/2 | 9.63 | 1.63 | 4.13 | 4.06 | 4.88 | Specified by purchaser | 36 | 7.50 | 8 | 1.13 |
| 3 | 9.50 | 1.50 | 5.00 | 4.00 | 5.00 | Specified by purchaser | 31 | 7.50 | 8 | 1.00 |
| 4 | 11.50 | 1.75 | 6.19 | 4.50 | 6.25 | Specified by purchaser | 53 | 9.25 | 8 | 1.25 |
| 5 | 13.75 | 2.00 | 7.31 | 5.00 | 7.50 | Specified by purchaser | 86 | 11.00 | 8 | 1.38 |
| 6 | 15.00 | 2.19 | 8.50 | 5.50 | 9.25 | Specified by purchaser | 110 | 12.50 | 12 | 1.25 |
| 8 | 18.50 | 2.50 | 10.63 | 6.38 | 11.75 | Specified by purchaser | 175 | 15.50 | 12 | 1.50 |
| 10 | 21.50 | 2.75 | 12.75 | 7.25 | 14.50 | Specified by purchaser | 260 | 18.50 | 16 | 1.50 |
| 12 | 24.00 | 3.13 | 15.00 | 7.88 | 16.50 | Specified by purchaser | 325 | 21.00 | 20 | 1.50 |
| 14 | 25.25 | 3.38 | 16.25 | 8.38 | 17.75 | Specified by purchaser | 400 | 22.00 | 20 | 1.63 |
| 16 | 27.75 | 3.50 | 18.50 | 8.50 | 20.00 | Specified by purchaser | 495 | 24.25 | 20 | 1.75 |
| 18 | 31.00 | 4.00 | 21.00 | 9.00 | 22.25 | Specified by purchaser | 680 | 27.00 | 20 | 2.00 |
| 20 | 33.75 | 4.25 | 23.00 | 9.75 | 24.50 | Specified by purchaser | 830 | 29.50 | 20 | 2.13 |
| 24 | 41.00 | 5.50 | 27.25 | 11.50 | 29.50 | Specified by purchaser | 1500 | 35.50 | 20 | 2.63 |
ANSI B16.5 Class 900 Weld Neck Flanges Dimensions & Weight Chart
| ANSI B16.5 Class 900 Welding Neck Flange Dimensions | |||||||||||
| Size in Inch | Size in mm | Outer Diameter | Flange Thickness | Hub OD | Weld Neck OD | Welding Neck Length | Bore | RF Diameter | RF Height | PCD | Weld Face |
| A | B | C | D | E | F | G | H | I | J | ||
| 1/2 | 15 | 120 | 22.3 | 38 | 21.3 | 60 | Refer Note | 34.9 | 7 | 82.6 | 1.6 |
| 3/4 | 20 | 130 | 25.4 | 44 | 26.7 | 70 | 42.9 | 7 | 88.9 | 1.6 | |
| 1 | 25 | 150 | 28.6 | 52 | 33.4 | 73 | 50.8 | 7 | 101.6 | 1.6 | |
| 1 1/4 | 32 | 160 | 28.6 | 64 | 42.2 | 73 | 63.5 | 7 | 111.1 | 1.6 | |
| 1 1/2 | 40 | 180 | 31.8 | 70 | 48.3 | 83 | 73 | 7 | 123.8 | 1.6 | |
| 2 | 50 | 215 | 38.1 | 105 | 60.3 | 102 | 92.1 | 7 | 165.1 | 1.6 | |
| 2 1/2 | 65 | 245 | 41.3 | 124 | 73 | 105 | 104.8 | 7 | 190.5 | 1.6 | |
| 3 | 80 | 240 | 38.1 | 127 | 88.9 | 102 | 127 | 7 | 190.5 | 1.6 | |
| 4 | 100 | 290 | 44.5 | 159 | 114.3 | 114 | 157.2 | 7 | 235 | 1.6 | |
| 5 | 125 | 350 | 50.8 | 190 | 141.3 | 127 | 185.7 | 7 | 279.4 | 1.6 | |
| 6 | 150 | 380 | 55.6 | 235 | 168.3 | 140 | 215.9 | 7 | 317.5 | 1.6 | |
| 8 | 200 | 470 | 63.5 | 298 | 219.1 | 162 | 269.9 | 7 | 393.7 | 1.6 | |
| 10 | 250 | 545 | 69.9 | 368 | 273 | 184 | 323.8 | 7 | 469.9 | 1.6 | |
| 12 | 300 | 610 | 79.4 | 419 | 323.8 | 200 | 381 | 7 | 533.4 | 1.6 | |
| 14 | 350 | 640 | 85.8 | 451 | 355.6 | 213 | 412.8 | 7 | 558.8 | 1.6 | |
| 16 | 400 | 705 | 88.9 | 508 | 406.4 | 216 | 469.9 | 7 | 616 | 1.6 | |
| 18 | 450 | 785 | 101.6 | 565 | 457 | 229 | 533.4 | 7 | 685.8 | 1.6 | |
| 20 | 500 | 855 | 108 | 622 | 508 | 248 | 584.2 | 7 | 749.3 | 1.6 | |
| 24 | 600 | 1040 | 139.7 | 749 | 610 | 292 | 692.2 | 7 | 901.7 | 1.6 | |
B16.5 Class 900 Welding Neck Flange Material
| Carbon Steel ANSI B16.5 Class 900 Weld Neck Flange | ASTM/ANSI A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ANSI SA105, A105N, ASTM A350 LF2 / ANSI SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
| Stainless Steel ANSI B16.5 Class 900 Weld Neck Flange | ASTM/ANSI A/SA182 F304, F304L, F316, F316L, ASTM/ANSI A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
| Alloy Steel ANSI B16.5 Class 900 Weld Neck Flange | ASTM A182 / ANSI SA182 F5, F9, F11, F12, F22, F91 |
| Titanium ANSI B16.5 Class 900 Weld Neck Flange | ASTM B381 / ANSI SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
| Copper ANSI B16.5 Class 900 Weld Neck Flange | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
| Copper Nickel ANSI B16.5 Class 900 Weld Neck Flange | ASTM / ANSI SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
| Brass ANSI B16.5 Class 900 Weld Neck Flange | 3602 / 2604 / H59 / H62 / etc. |
| Inconel ANSI B16.5 Class 900 Weld Neck Flange | ASTM B564 / ANSI SB564, Inconel 600, 601, 625, 718, 783, 690, x750 ANSI B16.5 Class 900 Weld Neck Flange |
| Hastelloy ANSI B16.5 Class 900 Weld Neck Flange | ASTM B564 / ANSI SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
| Monel ANSI B16.5 Class 900 Weld Neck Flange | ASTM B564 / ANSI SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
| Alloy 20 ANSI B16.5 Class 900 Weld Neck Flange | ASTM B462 / ANSI SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
| Aluminium ANSI B16.5 Class 900 Weld Neck Flange | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
| Nickel ANSI B16.5 Class 900 Weld Neck Flange | ASTM B564 / ANSI SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
| Duplex ANSI B16.5 Class 900 Weld Neck Flange | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Super Duplex ANSI B16.5 Class 900 Weld Neck Flange | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Incoloy ANSI B16.5 Class 900 Weld Neck Flange | ASTM B564 / ANSI SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
| 254 Smo ANSI B16.5 Class 900 Weld Neck Flange | ASTM A182 / ANSI SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
| Nimonic ANSI B16.5 Class 900 Weld Neck Flange | Nimonic 75, Nimonic 80A, Nimonic 90 |
| Other ANSI B16.5 Class 900 Weld Neck Flange material | Tin bronze, Aluminum bronze, Lead bronze |
ANSI B16.5 #900 Weld Neck Flange Schedule Chart
| WELDING NECK FLANGES BORES (in inchines) | ||||||||||||||
| Nom Pipe Size |
Outside Diam |
Sched 10 |
Sched 20 |
Sched 30 |
Std. Wall |
Sched 40 |
Sched 60 |
Extra Strong |
Sched 80 |
Sched 100 |
Sched 120 |
Sched 140 |
Sched 160 |
Double Extra Strong |
| 1/2” | 0.840 | 0.674 | – | – | 0.622 | 0.622 | – | 0.546 | 0.546 | – | – | – | 0.464 | 0.252 |
| 3/4” | 1.050 | 0.884 | – | – | 0.824 | 0.824 | – | 0.742 | 0.742 | – | – | – | 0.612 | 0.434 |
| 1” | 1.315 | 1.097 | – | – | 1.049 | 1.049 | – | 0.957 | 0.957 | – | – | – | 0.815 | 0.599 |
| 1.1/4” | 1.660 | 1.442 | – | – | 1.380 | 1.380 | – | 1.278 | 1.278 | – | – | – | 1.160 | 0.896 |
| 1.1/2” | 1.900 | 1.682 | – | – | 1.610 | 1.610 | – | 1.500 | 1.500 | – | – | – | 1.338 | 1.100 |
| 2” | 2.375 | 2.157 | – | – | 2.067 | 2.067 | – | 1.939 | 1.939 | – | – | – | 1.687 | 1.503 |
| 2.1/2” | 2.875 | 2.635 | – | – | 2.469 | 2.469 | – | 2.323 | 2.323 | – | – | – | 2.125 | 1.771 |
| 3” | 3.500 | 3.260 | – | – | 3.068 | 3.068 | – | 2.900 | 2.900 | – | – | – | 2.624 | 2.300 |
| 3-1/2” | 4.000 | 3.760 | – | – | 3.548 | 3.548 | – | 3.364 | 3.364 | – | – | – | – | 2.728 |
| 4” | 4.500 | 4.260 | – | – | 4.026 | 4.026 | – | 3.826 | 3.826 | – | 3.624 | – | 3.438 | 3.152 |
| 5” | 5.563 | 5.295 | – | – | 5.047 | 5.047 | – | 4.813 | 4.813 | – | 4.563 | – | 4.313 | 4.063 |
| 6” | 6.625 | 6.357 | – | – | 6.065 | 6.065 | – | 5.761 | 5.761 | – | 5.501 | – | 5.187 | 4.897 |
| 8” | 8.625 | 8.329 | 8.125 | 8.071 | 7.981 | 7.981 | 7.813 | 7.625 | 7.625 | 7.437 | 7.187 | 7.001 | 6.813 | 6.875 |
| 10” | 10.750 | 10.420 | 10.250 | 10.136 | 10.020 | 10.020 | 9.750 | 9.750 | 9.562 | 9.312 | 9.062 | 8.750 | 8.500 | 8.750 |
| 12” | 12.750 | 12.390 | 12.250 | 12.090 | 12.000 | 11.938 | 11.626 | 11.750 | 11.374 | 11.062 | 10.750 | 10.500 | 10.126 | 10.750 |
| 14” | 14.000 | 13.500 | 13.376 | 13.250 | 13.250 | 13.124 | 12.812 | 13.000 | 12.500 | 12.124 | 11.814 | 11.500 | 11.188 | – |
| 16” | 16.000 | 15.500 | 15.376 | 15.250 | 15.250 | 15.000 | 14.688 | 15.000 | 14.312 | 13.938 | 13.564 | 13.124 | 12.812 | – |
| 18” | 18.000 | 17.500 | 17.376 | 17.124 | 17.250 | 16.876 | 16.500 | 17.000 | 16.124 | 15.688 | 15.250 | 14.876 | 14.438 | – |
| 20” | 20.000 | 19.500 | 19.250 | 19.000 | 19.250 | 18.812 | 18.376 | 19.000 | 17.938 | 17.438 | 17.000 | 16.500 | 16.062 | – |
| 24” | 24.000 | 23.500 | 23.250 | 22.876 | 23.250 | 22.624 | 22.062 | 23.000 | 21.562 | 20.938 | 20.376 | 19.876 | 19.312 | – |
| 30” | 30.000 | 29.376 | 29.000 | 28.750 | 29.250 | – | – | 29.000 | – | – | – | – | – | – |
| 36” | 36.000 | 35.376 | 35.000 | 34.750 | 35.250 | 34.500 | – | 35.000 | – | – | – | – | – | – |
| 42” | 42.000 | – | – | – | 41.250 | – | – | 41.000 | – | – | – | – | – | – |
Dimension Tolerance Class 900 Welding Neck Flanges
| Outside Diameter | When O is 24″ or less. When O is over 24″. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
| Diameter of Contact Face | 0.06″ (1.6 mm) raised face. 0.25″ (6.4 mm) raised face. |
±0.03″ ±0.02″ | ±0.8 mm | ±0.5mm |
| Diameter of Hub at Point of Welding | NPS 5 and smaller. NPS 6 and larger. |
+0.09″, -0.03″ +0.16″, -0.03″ | +2.4 mm, -0.8mm | +4.0 mm, -0.8 mm |
| Inside Diameter | NPS 10, 12, 18, 20 and larger. | +0.03″ +0.06″ +0.12″, -0.06″ | +0.8 mm +1.6 mm | +3.2 mm, -1.6 mm |
| Diameter of Hub at Base | Hub Base is 24″or less. Hub Base is over 24″. |
+0.06″ +0.12″ | +1.6 mm | +3.2 mm |
| Thickness | NPS 18 and smaller. NPS 20 and larger. |
+0.12″ +0.19″ | +3.2 mm | +4.8 mm |
| Drilling and Facings | Bolt circle diameter Bolt Hole Spacing | ±0.06″ ±0.03″ | ±1.6 mm | ±0.8 mm |
| Eccentricity of Bolt Circle and Facing | NPS 2 1/2 and smaller. NPS 3 and larger. |
±0.03″ ±0.06″ | ±0.8 mm | ±1.6 mm |
| Length Through Hub | NPS 10 and smaller. NPS 12 and larger. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
Types of ANSI B16.5 Alloy Steel Class 900 Weld Neck Flanges We Supply
| ANSI B16.5 900LB WN Flange Supplier in Mumbai | 900LB Weld Neck Flange Manufacturer in India |
| BS4504 Weld Neck Flange #900 | Class 900 BS3293 Weld Neck Flange |
| #900 BS1560 Weld Neck Flange | ANSI B16.5 #900 Weld Neck Flange Pn10 |
| ANSI B16.5 Class 900 Weld Neck Flange Din 2527 | ANSI B16.5 Class 900 Weld Neck Flange Din En 1092-1 Supplier |
| Class 900 EN1092-1 WNRF Flanges | ANSI B16.5, SCH 40 Class 900 WNRF Flanges |