ASTM A335 P11 T11 Alloy Steel Pipe & Tubes
India’s Leading Alloy Steel P11 ERW Tubes, ASTM A335 P11 Seamless Pipes, DIN 1.7338 Seamless Pipes, UNS K11597 Seamless Pipes Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a standard exporter and manufacturer of ASTM A335 Grade P11 Pipes and ASTM A335 Grade T11 Tube, which are synthetic at our state – of – the – artwork infrastructure facility using trendy machines and superior technology.
It has a few great capabilities to provide consisting of Lightweight, Tough construction, Dimensionally accurate, and so on. We have emerged in imparting our precious clients a big range of ASTM A335 P11 Seamless Pipes, in which we additionally provide the identical at excellent prices. To cater to the various necessities of clients, we as properly provide Pipes in a spectrum of specs at affordable rates. The exams practices of ASTM have been designed for austenitic stainless steels and do now no longer always deliver significant consequences while strictly carried out to duplex steels consisting of our Pipes, particularly in regards to the difficulty of a sensitizing remedy previous to testing.
When the nitrogen content material is just too low in Pipes, retarding the formation of austenite at excessive temperatures after welding, there’s a hazard of formation of chromium nitride within the ferrite. ASTM A335 T11 Welded Tube additionally has a few different notable capabilities to provide consisting of Excellent overall performance and Long carrier life. It is appropriate for hydraulic and instrumentation packages in tropical marine environments. It is relatively immune to corrosion through natural acids, e.g. revel in much less than in 10 % formic acid in which it has corrosion rate. Also in infected acid, it stays resistant.
ASTM A335 P11 Hexagonal Pipes display consequences from exams of our Pipes and diverse stainless steels and nickel alloys in acetic acid infected with chlorides which in exercise are often found in processes. The pitting and crevice corrosion resistance of Pipes is typically decided through the content material of chromium, molybdenum and nitrogen. The production and fabrication exercise, e.g. welding of our Pipes, also are of critical significance for the real overall performance in carrier. Meanwhile, they’re additionally being presented in one-of-a-kind sizes, designs and shapes to our clients.
Largest Manufacturer & Supplier of ASTM A335 P11 Alloy Steel Seamless Pipes, Cr-Mo T11 Industrial Seamless Tubing, Alloy Steel T11 Seamless Tubes, P11 Chrome Moly Piping in Mumbai, India.
ASTM A335 P11 T11 Alloy Steel Pipe & Tubing Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS |
Alloy Steel P11 T11 | 1.7338 | K11597 |
Alloy Steel P11 T11 Pipes & Tubes Chemical Composition
Grade | C | Mn | P | S | Si | Cr | Mo |
Alloy Steel P11 T11 | 0.15 max | 0.30-0.60 | 0.025 max | 0.025 max | 0.50 max | 4.00-6.00 | 0.45-0.65 |
ASTM A335 P11 Piping & T11 Tubing Mechanical Properties
Grade | Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
Alloy Steel P11 T11 | 415 min | 205 min | 30 min |
Specification of ASTM A335 P11 T11 Alloy Steel Pipe & Tubing
Alloy Steel P11 T11 Pipes Tubes Specifications | ASTM A335 / ASME SA335 |
---|---|
Dimensional specification | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
Outside Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
Chrome Moly P11 T11 Pipes & Tubes Manufacturing Shapes | Hydraulic, Round, Rectangle, Square, Hex, Honed |
Alloy Steel P11 T11 Pipes & Tubes Manufacturing Techniques | Seamless |
ASTM A335 P11 T11 Seamless Pipes & Tubes Size | 1 / 2″ NB – 16″ NB |
ASTM A335 P11 T11 Welded Pipes & Tubes Size | 1 / 2″ NB – 24″ NB |
ASTM A335 P11 T11 EFW Pipes & Tubes Size | 6″ NB – 24″ NB |
Alloy Steel P11 T11 Pipes & Tubes Schedule Thickness Range | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
Chrome Moly P11 T11 Pipes & Tubes End Types | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
Delivery Condition of Alloy Steel P11 T11 Pipes & Tubes | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
Value Added Services | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
Inspection and Test Reports | EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports |
Outside Finish | 2B, No.4, No.1, No.8 Mirror Finish for Alloy Steel Pipes, Finish as per customer Requirements |
Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
Marking | Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo – on request Marked Pipe Sample: ANSI B36.19 ASTM A 335 P11 12″ NB SCH 40S SEAMLESS HEAT NO. XXXX |
Packing of Chrome Moly P11 Pipes | Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
Specials | Sizes and Specifications other than above can be on request |
Alloy Steel P11 Pipes & Tubing BSi - British Standards institute
ASTM International | BSi – British Standards institute | Material |
A335 Gr. P5 | 3604/625 | 5% Cr 1/2% Mo |
A335 Gr. P9 | 3604/629 | 9% Cr 1% Mo |
A335 Gr. P11 | 3604/621 | 1 1/4% Cr 1/2% Mo |
A335 Gr. P12 | 3604/620 | 1% Cr 1/2% Mo |
A335 Gr. P22 | 3604/622 | 2 1/4% Cr 1% No |
ASTM A335 P11 T11 Alloy Steel Seamless Pipe Sizes
O.D. x Thickness | O.D x Thickness | O.D x Thickness |
---|---|---|
38.1 x 3.2mm | 57.0 x 4.9mm | 76.2 x 4.0mm |
38.1 x 4.0mm | 57.0 x 6.3mm | 76.2 x 5.0mm |
38.1 x 6.3mm | 57.0 x 7.9mm | 76.2 x 6.3mm |
42.4 x 3.2mm | 60.3 x 3.2mm | 82.5 x 4.5mm |
42.4 x 4.0mm | 60.3 x 3.6mm | 88.9 x 3.2mm |
44.5 x 3.2mm | 60.3 x 5.0mm | 88.9 x 3.6mm |
44.5 x 6.3mm | 63.5 x 3.2mm | 88.9 x 4.0mm |
48.3 x 3.2mm | 63.5 x 3.6mm | 101.6 x 3.6mm |
48.3 x 3.6mm | 63.5 x 4.0mm | 101.6 x 4.5mm |
50.8 x 4.5mm | 63.5 x 6.3mm | 101.6 x 6.3mm |
51.0 x 3.2mm | 63.5 x 7.9mm | 114.3 x 3.6mm |
51.0 x 3.6mm | 70.0 x 3.2mm | 114.3 x 5.0mm |
51.0 x 6.3mm | 70.0 x 3.6mm | 139.7 x 4.0mm |
57.0 x 3.2mm | 70.0 x 6.3mm | 139.7 x 5.0mm |
57.0 x 3.6mm | 76.2 x 3.6mm | 139.7 x 6.3mm |
NB | Size | OD | 40S | 5S | 10S | S10 | S20 | S40 | S60 | XS/80S | S80 | S100 | S120 | S140 | S160 | XXS |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
1/8” | 10.29 | 1.2 | 1.73 | 2.41 | ||||||||||||
1/4” | 13.72 | 1.7 | 2.24 | 3.02 | ||||||||||||
3/8” | 17.15 | 1.7 | 2.31 | 3.2 | ||||||||||||
15 | 1/2” | 21.34 | 2.8 | 1.7 | 2.1 | 2.77 | 3.73 | 3.73 | 4.78 | 7.47 | ||||||
20 | 3/4” | 26.67 | 2.9 | 1.7 | 2.1 | 2.87 | 3.91 | 3.91 | 5.56 | 7.82 | ||||||
25 | 1” | 33.4 | 3.4 | 1.7 | 2.8 | 3.38 | 4.55 | 4.55 | 6.35 | 9.09 | ||||||
32 | 1 1/4” | 42.16 | 3.6 | 1.7 | 2.8 | 3.56 | 4.85 | 4.85 | 6.35 | 9.7 | ||||||
40 | 1 1/2” | 48.26 | 3.7 | 1.7 | 2.8 | 3.68 | 5.08 | 5.08 | 7.14 | 10.2 | ||||||
50 | 2” | 60.33 | 3.9 | 1.7 | 2.8 | 3.91 | 5.54 | 5.54 | 9.74 | 11.1 | ||||||
65 | 2 1/2” | 73.03 | 5.2 | 2.1 | 3.1 | 5.16 | 7.01 | 7.01 | 9.53 | 14 | ||||||
80 | 3” | 88.9 | 5.5 | 2.1 | 3.1 | 5.49 | 7.62 | 7.62 | 11.1 | 15.2 | ||||||
90 | 3 1/2” | 101.6 | 5.7 | 2.1 | 3.1 | 5.74 | 8.08 | 8.08 | ||||||||
100 | 4” | 114.3 | 6 | 2.1 | 3.1 | 6.02 | 8.56 | 8.56 | 11.1 | 13.5 | 17.1 | |||||
125 | 5” | 141.3 | 6.6 | 2.8 | 3.4 | 6.55 | 9.53 | 9.53 | 12.7 | 15.9 | 19.1 | |||||
150 | 6” | 168.3 | 7.1 | 2.8 | 3.4 | 7.11 | 10.97 | 11 | 14.3 | 18.3 | 22 | |||||
200 | 8” | 219.1 | 8.2 | 2.8 | 3.8 | 6.4 | 8.18 | 10.3 | 12.7 | 12.7 | 15.1 | 19.3 | 20.6 | 23 | 22.2 | |
250 | 10” | 273.1 | 9.3 | 3.4 | 4.2 | 6.4 | 9.27 | 12.7 | 12.7 | 15.1 | 19.3 | 21.4 | 25.4 | 28.6 | 25.4 | |
300 | 12” | 323.9 | 9.5 | 4 | 4.6 | 6.4 | 10.3 | 14.3 | 12.7 | 17.5 | 21.4 | 25.4 | 28.6 | 33.3 | 25.4 | |
350 | 14” | 355.6 | 9.5 | 4 | 4.8 | 6.4 | 7.9 | 11.1 | 15.1 | 12.7 | 19.1 | 23.8 | 27.8 | 31.8 | 35.7 | |
400 | 16” | 406.4 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 12.7 | 16.7 | 12.7 | 21.4 | 26.2 | 31 | 36.5 | 40.5 | |
450 | 18” | 457.2 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 14.3 | 19.1 | 12.7 | 23.8 | 29.4 | 34.9 | 39.7 | 45.2 | |
500 | 20” | 508 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 15.1 | 20.6 | 12.7 | 26.2 | 32.5 | 38.1 | 44.5 | 50 | |
550 | 22” | 558.8 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 22.2 | 12.7 | 28.6 | 34.9 | 41.3 | 47.6 | 54 | ||
600 | 24” | 609.6 | 9.5 | 5.5 | 6.4 | 6.4 | 9.5 | 17.5 | 24.6 | 12.7 | 31 | 38.9 | 46 | 52.4 | 59.5 | |
650 | 26” | 660.4 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
700 | 28” | 711.2 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
750 | 30” | 762 | 9.5 | 6.4 | 7.9 | 7.9 | 13 | 12.7 | ||||||||
800 | 32” | 812.8 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
850 | 34” | 863.6 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
900 | 36” | 914.4 | 9.5 | 7.9 | 13 | 19.1 | 12.7 |
ASTM A335 Alloy Steel P11 Heat Treatment Requirements
Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing or Tempering Temperature Range F [C] |
---|---|---|---|
ASTM A335 P5 Pipe(b,c) | Full or Isothermal Anneal | ||
Normalize and Temper | ***** | 1250 [675] | |
Subcritical Anneal (P5c only) | ***** | 1325 – 1375 [715 – 745] | |
ASTM A335 P9 Pipe | Full or Isothermal Anneal | ||
Normalize and Temper | ***** | 1250 [675] | |
ASTM A335 P11 Pipe | Full or Isothermal Anneal | ||
Normalize and Temper | ***** | 1200 [650] | |
ASTM A335 P22 Pipe | Full or Isothermal Anneal | ||
Normalize and Temper | ***** | 1250 [675] | |
ASTM A335 P91 Pipe | Normalize and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
Quench and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
Alloy Steel ASTM A335 P11 Pipes Price List
Size | MSL Make | ISMT make | JSL Make |
1/2″ | 4,264.71 | 4,257.35 | 4,272.06 |
3/4″ | 4,044.12 | 4,036.76 | 4,051.47 |
1″ | 3,897.06 | 3,889.71 | 3,904.41 |
1.25″ | 3,852.94 | 3,845.59 | 3,860.29 |
1.5″ | 3,750.00 | 3,742.65 | 3,757.35 |
ASTM A335 P11 Alloy Steel Seamless Pipe Outside Diameter & Tolerance
ASTM A450 | Hot rolled | Outside Diameter, mm | Tolerance, mm |
OD≤101.6 | +0.4/-0.8 | ||
101.6?OD≤190.5 | +0.4/-1.2 | ||
190.5?OD≤228.6 | +0.4/-1.6 | ||
Cold Drawn | Outside Diameter, mm | Tolerance, mm | |
OD?25.4 | ±0.10 | ||
25.4≤OD≤38.1 | ±0.15 | ||
38.1?OD?50.8 | ±0.20 | ||
50.8≤OD?63.5 | ±0.25 | ||
63.5≤OD?76.2 | ±0.30 | ||
76.2≤OD≤101.6 | ±0.38 | ||
101.6?OD≤190.5 | +0.38/-0.64 | ||
190.5?OD≤228.6 | +0.38/-1.14 | ||
ASTM A530 & ASTM A335 | NPS | Outside Diameter, inch | Tolerance, mm |
1/8≤OD≤1-1/2 | ±0.40 | ||
1-1/2?OD≤4 | ±0.79 | ||
4?OD≤8 | +1.59/-0.79 | ||
8?OD≤12 | +2.38/-0.79 | ||
OD>12 | ±1% |
ASTM A335 P11 Alloy Steel Pipe Weight Chart
Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
---|---|---|---|---|---|---|---|---|
1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
- UNS K11597 Seamless Pipe
- CrMo P11 Seamless Pipe
- DIN 1.7338 Seamless Pipe
- EN 10217-7 Alloy Gr. P11 Seamless Pipe
- Chromium Molybdenum P11 Seamless Pipe Supplier
- INOX 1.7338 Square Pipe
- Nickel Alloy EN 10216-5 Square Piping
- Chrome Moly Steel P11 Square Pipes Supplier
- Chromium Molybdenum P11 Square Pipe Supplier
- Alloy Steel P11 Cold Drawn Square Pipes
- UNS K11597 Rectangular Pipe
- CrMo P11 Rectangular Pipe
- Chromium Molybdenum P11 Rectangular Pipe Supplier
- ASME SA335 Alloy Steel P11 Rectangular Pipe
- Alloy Steel P11 Cold Drawn Rectangular Pipes
- UNS K11597 Welded Pipe
- INOX 1.7338 Welded Pipe
- ASTM A335 P11 Alloy Steel Welded Pipe
- Chrome Moly Steel P11 Welded Pipes Supplier
- EN 10217-7 Alloy Gr. P11 Welded Pipe
- CrMo P11 Electropolish Pipe
- INOX 1.7338 Electropolish Pipe
- Chrome Moly Steel P11 Electropolish Pipes Supplier
- EN 10217-7 Alloy Gr. P11 Electropolish Pipe
- Chromium Molybdenum P11 Electropolish Pipe Supplier
- CrMo T11 Capillary Tubes
- INOX 1.7338 Capillary Tubing
- Nickel Alloy Gr T11 EN 10216-5 Capillary Tubing
- Chrome Moly Steel T11 Capillary Tubes Supplier
- Alloy Steel P11 Cold Drawn Capillary Tubing
- CrMo P11 ERW Pipe
- DIN 1.7338 ERW Pipe
- Chrome Moly Steel P11 ERW Pipes Supplier
- EN 10217-7 Alloy Gr. P11 ERW Pipe
- UNS K11597 ERW Piping
- CrMo P11 Hollow Pipe
- INOX 1.7338 Hollow Pipe
- Chrome Moly Steel P11 Hollow Pipes Supplier
- Alloy Steel P11 Cold Drawn Hollow Pipes
- UNS K11597 Hollow Piping
- UNS K11597 EFW Pipe
- DIN 1.7338 EFW Pipe
- Chrome Moly Steel P11 EFW Pipes Supplier
- EN 10217-7 Alloy Gr. P11 EFW Pipe
- Alloy Steel P11 Cold Drawn EFW Pipes
Alloy Steel ASTM A335 P11 Pipe Wall thickness & Tolerance
Alloy ASTM A335 | Hot rolled | Outside Diameter, mm | Tolerance, % |
OD≤101.6, WT≤2.4 | +40/-0 | ||
OD≤101.6, 2.4<WT≤3.8 | +35/-0 | ||
OD≤101.6, 3.8<WT≤4.6 | +33/-0 | ||
OD≤101.6, WT>4.6 | +28/-0 | ||
OD>101.6, 2.4<WT≤3.8 | +35/-0 | ||
OD>101.6, 3.8<WT≤4.6 | +33/-0 | ||
OD>101.6, WT>4.6 | +28/-0 | ||
Cold Drawn | Outside Diameter, mm | Tolerance, % | |
OD≤38.1 | +20/-0 | ||
OD>38.1 | +22/-0 | ||
ASTM A530 | NPS | Outside Diameter, inch | Tolerance, % |
1/8≤OD≤2-1/2 | +20.0/-12.5 | ||
3≤OD≤18, WT/OD≤5% | +22.5/-12.5 | ||
3≤OD≤18, WT/OD>5% | +15.0/-12.5 | ||
OD≥20, WT/OD≤5% | +22.5/-12.5 | ||
OD≥20, WT/OD>5% | +15.0/-12.5 |