ASTM A335 P5 Alloy Steel Pipe & Tubes Manufacturer & Supplier

  • Home
  • ASTM A335 P5 Alloy Steel Pipe & Tubes Manufacturer & Supplier

ASTM A335 P5 T5 Alloy Steel Pipe & Tubes

India’s Leading Alloy Steel P5 ERW Pipes, ASTM A335 P5 Seamless Pipes, Chrome-Moly Pipe, UNS K41545 Seamless Tubes Manufacturer & Supplier in India.

Kanak Steel & Engg Co. is a standard exporter and seller of ASTM A335 Gr P5 Pipes and ASTM A335 Gr T5 Tubes, which possesses excessive electricity and hardness coupled with proper corrosion resistance.
In Commercially Pure Alloy, the mechanical units of Pipes are managed through the chemistry input; better quantities of Nitrogen, Oxygen, and Iron will boom electricity homes. At carrier temperature, it includes 100 % hcp alpha phase. ASTM A335 Gr P5 EFW Pipes is used notably for sea water piping, reactor vessels and warmth exchangers’ within the Petrochemical, Oil & Gas and Marine Industries. It is a broadly used grade that gives a yield electricity of 275 MPa (forty ksi) minimum. Corrosion resistance of Pipes is comparable among different grades however mechanical homes range alongside various oxygen and iron contents. These Commercially Pure Pipes is barely more potent however similarly corrosion resistant in opposition to maximum applications.
It possesses the finest formability, remarkable corrosion resistance and excessive effect toughness. ASTM A335 Gr P5 Round Pipes is frequently utilized in surgical treatment and medicinal drug in addition to in aerospace, chemical plant, automotive, energy generation, sports, oil and fueloline extraction, and different essential industries. However, the corrosion resistance of Pipes may be in addition more suitable through a chain of procedures together with hardening, tempering and polishing. It additionally proves good enough resistance to nitric acid, focused sulfuric acid, dilute acetic acid and naphtha.
In its annealed condition, it is able to be drawn, shaped or fashioned and due to the fact it’s far an air or oil quench hardening grade. ASTM A335 Gr P5 Square Pipes is the simple, preferred reason martensitic chrome steel this is used for surprisingly confused elements and gives proper corrosion resistance plus excessive electricity and hardness. It is the simple martensitic stainless to be able to gain excessive mechanical homes after warmth treatment. They are hardenable, straight – chromium steels which integrate advanced put on resistance of excessive carbon alloys with the remarkable corrosion resistance of chromium steels.

Largest Manufacturer & Supplier of Cr-Mo T5 Industrial Seamless Tubing, Grade T5 Seamless Tubes, Chrome Moly Piping, Alloy Steel P5 Hollow Pipe in Mumbai, India.

ASTM A335 P5 T5 Alloy Steel Pipe & Tubing Equivalent Grades

STANDARD WERKSTOFF NR. UNS
Alloy Steel P5 T5 1.7362 K41545

Alloy Steel P5 T5 Pipes & Tubes Chemical Composition

Grade C Mn P S Si Cr Mo
Alloy Steel P5 T5 0.15 max 0.30-0.60 0.025 max 0.025 max 0.50 max 4.00-6.00 0.45-0.65

ASTM A335 P5 T5 Piping & Tubing Mechanical Properties

Grade Tensile Strength, MPa Yield Strength, MPa Elongation, %
Alloy Steel P5 T5 415 min 205 min 30 min

Specification of ASTM A335 P5 T5 Alloy Steel Pipe & Tubing

Alloy Steel P5 T5 Pipes Tubes Specifications ASTM A335 / ASME SA335
Dimensional specification ANSI/ASME B36.19M, ANSI/ASME B36.10M
Outside Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Chrome Moly P5 T5 Pipes & Tubes Manufacturing Shapes Hydraulic, Round, Rectangle, Square, Hex, Honed
Alloy Steel P5 T5 Pipes & Tubes Manufacturing Techniques Seamless
ASTM A335 P5 T5 Seamless Pipes & Tubes Size 1 / 2″ NB – 16″ NB
ASTM A335 P5 T5 Welded Pipes & Tubes Size 1 / 2″ NB – 24″ NB
ASTM A335 P5 T5 EFW Pipes & Tubes Size 6″ NB – 24″ NB
Alloy Steel P5 T5 Pipes & Tubes Schedule Thickness Range SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Chrome Moly P5 T5 Pipes & Tubes End Types Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends)
Delivery Condition of Alloy Steel P5 T5 Pipes & Tubes Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Surface Finish No.1, No.4, No.8 Mirror Finish, 2B
Value Added Services Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing
Inspection and Test Reports EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports
Outside Finish 2B, No.4, No.1, No.8 Mirror Finish for Alloy Steel Pipes, Finish as per customer Requirements
Delivery Condition Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Marking Specification
Grade
Nominal Pipe Sizes
Pipe Schedule or Wall Thickness
Manufacturing Method (Seamless / Welded)
Heat Number
Manufacturer’s Name or Custom Logo – on request
Marked Pipe Sample: ANSI B36.19 ASTM A 335 P5 12″ NB SCH 40S SEAMLESS HEAT NO. XXXX
Packing of Chrome Moly P5 Pipes Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials Sizes and Specifications other than above can be on request

Alloy Steel P5 Pipes & Tubing BSi - British Standards institute

ASTM International BSi – British Standards institute Material
A335 Gr. P5 3604/625 5% Cr 1/2% Mo
A335 Gr. P9 3604/629 9% Cr 1% Mo
A335 Gr. P11 3604/621 1 1/4% Cr 1/2% Mo
A335 Gr. P12 3604/620 1% Cr 1/2% Mo
A335 Gr. P22 3604/622 2 1/4% Cr 1% No
ASTM A335 P1 Pipe Dimensions, NB Size Schedule

ASTM A335 P5 T5 Alloy Steel Seamless Pipe Sizes

O.D. x Thickness O.D x Thickness O.D x Thickness
38.1 x 3.2mm 57.0 x 4.9mm 76.2 x 4.0mm
38.1 x 4.0mm 57.0 x 6.3mm 76.2 x 5.0mm
38.1 x 6.3mm 57.0 x 7.9mm 76.2 x 6.3mm
42.4 x 3.2mm 60.3 x 3.2mm 82.5 x 4.5mm
42.4 x 4.0mm 60.3 x 3.6mm 88.9 x 3.2mm
44.5 x 3.2mm 60.3 x 5.0mm 88.9 x 3.6mm
44.5 x 6.3mm 63.5 x 3.2mm 88.9 x 4.0mm
48.3 x 3.2mm 63.5 x 3.6mm 101.6 x 3.6mm
48.3 x 3.6mm 63.5 x 4.0mm 101.6 x 4.5mm
50.8 x 4.5mm 63.5 x 6.3mm 101.6 x 6.3mm
51.0 x 3.2mm 63.5 x 7.9mm 114.3 x 3.6mm
51.0 x 3.6mm 70.0 x 3.2mm 114.3 x 5.0mm
51.0 x 6.3mm 70.0 x 3.6mm 139.7 x 4.0mm
57.0 x 3.2mm 70.0 x 6.3mm 139.7 x 5.0mm
57.0 x 3.6mm 76.2 x 3.6mm 139.7 x 6.3mm
NB Size OD 40S 5S 10S S10 S20 S40 S60 XS/80S S80 S100 S120 S140 S160 XXS
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
1/8” 10.29 1.2 1.73 2.41
1/4” 13.72 1.7 2.24 3.02
3/8” 17.15 1.7 2.31 3.2
15 1/2” 21.34 2.8 1.7 2.1 2.77 3.73 3.73 4.78 7.47
20 3/4” 26.67 2.9 1.7 2.1 2.87 3.91 3.91 5.56 7.82
25 1” 33.4 3.4 1.7 2.8 3.38 4.55 4.55 6.35 9.09
32 1 1/4” 42.16 3.6 1.7 2.8 3.56 4.85 4.85 6.35 9.7
40 1 1/2” 48.26 3.7 1.7 2.8 3.68 5.08 5.08 7.14 10.2
50 2” 60.33 3.9 1.7 2.8 3.91 5.54 5.54 9.74 11.1
65 2 1/2” 73.03 5.2 2.1 3.1 5.16 7.01 7.01 9.53 14
80 3” 88.9 5.5 2.1 3.1 5.49 7.62 7.62 11.1 15.2
90 3 1/2” 101.6 5.7 2.1 3.1 5.74 8.08 8.08
100 4” 114.3 6 2.1 3.1 6.02 8.56 8.56 11.1 13.5 17.1
125 5” 141.3 6.6 2.8 3.4 6.55 9.53 9.53 12.7 15.9 19.1
150 6” 168.3 7.1 2.8 3.4 7.11 10.97 11 14.3 18.3 22
200 8” 219.1 8.2 2.8 3.8 6.4 8.18 10.3 12.7 12.7 15.1 19.3 20.6 23 22.2
250 10” 273.1 9.3 3.4 4.2 6.4 9.27 12.7 12.7 15.1 19.3 21.4 25.4 28.6 25.4
300 12” 323.9 9.5 4 4.6 6.4 10.3 14.3 12.7 17.5 21.4 25.4 28.6 33.3 25.4
350 14” 355.6 9.5 4 4.8 6.4 7.9 11.1 15.1 12.7 19.1 23.8 27.8 31.8 35.7
400 16” 406.4 9.5 4.2 4.8 6.4 7.9 12.7 16.7 12.7 21.4 26.2 31 36.5 40.5
450 18” 457.2 9.5 4.2 4.8 6.4 7.9 14.3 19.1 12.7 23.8 29.4 34.9 39.7 45.2
500 20” 508 9.5 4.8 5.5 6.4 9.5 15.1 20.6 12.7 26.2 32.5 38.1 44.5 50
550 22” 558.8 9.5 4.8 5.5 6.4 9.5 22.2 12.7 28.6 34.9 41.3 47.6 54
600 24” 609.6 9.5 5.5 6.4 6.4 9.5 17.5 24.6 12.7 31 38.9 46 52.4 59.5
650 26” 660.4 9.5 7.9 13 12.7
700 28” 711.2 9.5 7.9 13 12.7
750 30” 762 9.5 6.4 7.9 7.9 13 12.7
800 32” 812.8 9.5 7.9 13 17.5 12.7
850 34” 863.6 9.5 7.9 13 17.5 12.7
900 36” 914.4 9.5 7.9 13 19.1 12.7

ASTM A335 Alloy Steel P5 T5 Heat Treatment Requirements

Grade Heat Treatment Type Normalizing Temperature Range F [C] Subcritical Annealing
or Tempering
Temperature Range F
[C]
ASTM A335 P5 Pipe(b,c) Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
Subcritical Anneal (P5c only) ***** 1325 – 1375 [715 – 745]
ASTM A335 P9 Pipe Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
ASTM A335 P11 Pipe Full or Isothermal Anneal
Normalize and Temper ***** 1200 [650]
ASTM A335 P22 Pipe Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
ASTM A335 P91 Pipe Normalize and Temper 1900-1975 [1040 – 1080] 1350-1470 [730 – 800]
Quench and Temper 1900-1975 [1040 – 1080] 1350-1470 [730 – 800]

Alloy Steel ASTM A335 P5 Pipes Price List

Size MSL Make ISMT make JSL Make
1/2″ 4,264.71 4,257.35 4,272.06
3/4″ 4,044.12 4,036.76 4,051.47
1″ 3,897.06 3,889.71 3,904.41
1.25″ 3,852.94 3,845.59 3,860.29
1.5″ 3,750.00 3,742.65 3,757.35

ASTM A335 P5 Alloy Steel Seamless Pipe Outside Diameter & Tolerance

ASTM A450 Hot rolled Outside Diameter, mm Tolerance, mm
OD≤101.6 +0.4/-0.8
101.6?OD≤190.5 +0.4/-1.2
190.5?OD≤228.6 +0.4/-1.6
Cold Drawn Outside Diameter, mm Tolerance, mm
OD?25.4 ±0.10
25.4≤OD≤38.1 ±0.15
38.1?OD?50.8 ±0.20
50.8≤OD?63.5 ±0.25
63.5≤OD?76.2 ±0.30
76.2≤OD≤101.6 ±0.38
101.6?OD≤190.5 +0.38/-0.64
190.5?OD≤228.6 +0.38/-1.14
ASTM A530 & ASTM A335 NPS Outside Diameter, inch Tolerance, mm
1/8≤OD≤1-1/2 ±0.40
1-1/2?OD≤4 ±0.79
4?OD≤8 +1.59/-0.79
8?OD≤12 +2.38/-0.79
OD>12 ±1%

ASTM A335 P5 Alloy Steel Pipe Weight Chart

Size NPS Pipe O.D. Wall Thickness Pipe I.D. Weight per Foot Standard to XXHY Schedule
Pipe # 		Section Modulus Gallon Capacity Per Linear Foot
1/2 0.84 0.109 0.622 0.85 STD 40 .0407 .0158
0.147 0.546 1.09 XHY 80 .0478 .0122
0.188 0.464 1.31 160 .0528 .0088
0.294 0.252 1.72 XXHY .0577 .0026
3/4 1.05 0.113 0.824 1.13 STD 40 .0705 .0277
0.154 0.742 1.48 XHY 80 .0853 .0225
0.219 0.612 1.95 160 .1006 .0153
0.308 0.434 2.44 XXHY .1103 .0077
1 1.315 0.133 1.049 1.68 STD 40 .1328 .0449
0.179 0.957 2.17 XHY 80 .1606 .0374
0.250 0.815 2.85 160 .1904 .0271
0.358 0.599 3.66 XXHY .2136 .0146
1 1/4 1.66 0.140 1.380 2.27 STD 40 .2346 .0777
0.191 1.278 3.00 XHY 80 .2913 .0666
0.250 1.160 3.77 160 .3421 .0549
0.382 0.896 5.22 .4110 .0328
1 1/2 1.90 0.145 1.610 2.72 STD 40 .3262 .1058
0.200 1.500 3.63 XHY 80 .4118 .0918
0.281 1.338 4.86 160 .5079 .0730
0.400 1.100 6.41 .5977 .0494
2 2.375 0.109 2.157 2.64 10 .4205 .1898
0.154 2.067 3.66 STD 40 .5606 .1743
0.218 1.939 5.03 XHY 80 .7309 .1534
0.250 1.875 5.68 .8045 .1434
0.281 1.813 6.29 .8666 .1344
0.344 1.687 7.47 160 .9806 .1161
0.436 1.503 9.04 XXHY 1.1043 .0922
2 1/2 2.875 0.120 2.635 3.53 10 .6870 .2833
0.203 2.469 5.80 STD. 40 1.0640 .2487
0.216 2.443 6.14 1.1169 .2435
0.250 2.375 7.02 1.2468 .2301
0.276 2.323 7.67 XHY 80 1.3386 .2202
0.375 2.125 10.02 160 1.6371 .1842
0.552 1.771 13.71 XXXHY 1.9971 .1280
3 3.50 0.120 3.260 4.34 1.0411 .4336
0.156 3.188 5.58 1.3122 .4147
0.172 3.156 6.12 1.4265 .4064
0.188 3.124 6.66 1.5342 .3984
0.216 3.068 7.58 STD. 40 1.7241 .3840
0.250 3.000 8.69 1.9372 .3672
0.281 2.938 9.67 2.1207 .3521
0.300 2.900 10.26 XHY 80 2.2253 .3431
0.438 2.624 14.34 160 2.8774 .2811
0.600 2.300 18.6 XXHY 3.4243 .2158
3 1/2 4.0 0.120 3.760 4.98 10 1.3776 .5768
0.226 3.548 9.12 STD. 140 2.3939 .5136
0.250 3.500 10.02 2.6001 .4998
0.281 3.438 11.17 2.8562 .4821
0.318 3.364 12.52 XHY 80 3.1400 .4617
0.636 2..728 22.87 XXHY 4.8795 .3085
4 4.5 0.120 4.260 5.62 10 1.7612 .7404
0.156 4.188 7.24 2.2354 .7156
0.188 4.124 8.67 2.6296 .6942
0.203 4.094 9.32 2.8173 .6838
0.219 4.062 10.02 3.0184 .6725
0.237 4.026 10.80 STD. 40 3.2145 .6613
0.250 4.000 11.36 3.3611 .6528
0.281 3.938 12.67 60 3.7021 .6326
0.312 3.876 13.97 4.0273 .6126
0.337 3.826 15.00 XHY 80 4.2713 .5972
0.438 3.624 19.02 120 5.1790 .5361
0.531 3.438 22.53 160 5.8997 .4822
0.674 3.152 27.57 XXHY 6.7927 .4054
5 5.563 0.188 5.187 10.80 4.1161 1.0979
0.219 5.125 12.51 4.7279 1.0716
0.258 5.047 14.63 STD. 40 5.4500 1.0391
0.281 5.001 15.87 5.8644 1.0204
0.312 4.939 17.51 6.4074 .99647
0.344 4.875 19.19 6.9358 .9696
0.375 4.813 20.80 XHY 80 7.4300 .9449
0.500 4.563 27.06 120 9.2534 .8495
0.625 4.313 32.99 160 10.7976 .7590
0.750 4.063 38.59 XXHY 12.0954 .6734
6 6.625 0.109 6.407 7.59 5 3.5769 1.6748
0.134 6.357 9.30 10 4.3475 1.6488
0.156 6.313 10.79 5.0107 1.6260
0.188 6.249 12.94 5.9351 1.5937
0.203 6.219 13.94 6.3804 1.5780
0.219 6.187 15.00 6.8261 1.5620
0.250 6.125 17.04 7.6905 1.5306
0.280 6.065 18.99 STD. 40 8.4958 1.5008
0.312 6.001 21.06 9.3416 1.4688
0.344 5.937 23.10 10.111 1.4391
0.375 5.875 25.05 10.893 1.4082
0.432 5.761 28.60 XHY 80 12.224 1.3541
0.500 5.625 32.74 13.711 1.2909
0.562 5.501 36.43 120 14.9806 1.2346
0.625 5.375 40.09 16.1821 1.1787
0.719 5.187 45.39 160 17.8243 1.0977
0.864 4.897 53.21 XXHY 20.025 .9784
1.000 4.625 60.13 21.7719 .8727
1.125 4.375 66.14 23.1237 .7809
  • UNS K41545 Seamless Pipe
  • DIN 1.7362 Seamless Pipe
  • ASTM A335 Alloy Steel P5 Seamless Pipe
  • EN 10217-7 Alloy Gr. P5 Seamless Pipe
  • Alloy Steel Gr. P5 Cold Drawn Seamless Pipes
  • CrMo P5 Square Pipe
  • DIN 1.7362 Square Pipe
  • Chromium Molybdenum P5 Square Pipe Supplier
  • Alloy Steel Gr. P5 Cold Drawn Square Pipes
  • UNS K41545 Square Piping
  • UNS K41545 Rectangular Pipe
  • INOX 1.7362 Rectangular Pipe
  • ASTM A335 Alloy Steel P5 Rectangular Pipe
  • Chromium Molybdenum P5 Rectangular Pipe Supplier
  • Alloy Steel Gr. P5 Cold Drawn Rectangular Pipes
  • UNS K41545 Welded Pipe
  • INOX 1.7362 Welded Pipe
  • ASTM A335 Alloy Steel Gr P5 Thick Wall Welded Pipes
  • Chrome Moly Steel P5 Welded Pipes Supplier
  • EN 10217-7 Alloy Gr. P5 Welded Pipe
  • UNS K41545 Electropolish Pipe
  • DIN 1.7362 Electropolish Pipe
  • EN 10217-7 Alloy Gr. P5 Electropolish Pipe
  • ASME SA335 Alloy Steel P5 Electropolish Pipe
  • Alloy Steel Gr. P5 Cold Drawn Electropolish Pipes
  • UNS K41545 Capillary Tubes
  • DIN 1.7362 Capillary Tubes
  • ASTM A335 Alloy Steel T5 Capillary Tubes
  • EN 10217-7 Alloy Gr. T5 Capillary Tubes
  • ASME SA335 Alloy Steel T5 Capillary Tubes
  • CrMo P5 ERW Pipe
  • Chrome Moly Steel P5 ERW Pipes Supplier
  • Chromium Molybdenum P5 ERW Pipe Supplier
  • ASME SA335 Alloy Steel P5 ERW Pipe
  • Alloy Steel Gr. P5 Cold Drawn ERW Pipes
  • ASTM A335 Alloy Steel P5 Hollow Pipe
  • Grade P5 Alloy Hollow Pipe
  • EN 10217-7 Alloy Gr. P5 Hollow Pipe
  • Chromium Molybdenum P5 Hollow Pipe Supplier
  • ASME SA335 Alloy Steel P5 Hollow Pipe
  • UNS K41545 EFW Pipe
  • CrMo P5 EFW Pipe
  • INOX 1.7362 EFW Pipe
  • Chrome Moly Steel P5 EFW Pipes Supplier
  • EN 10217-7 Alloy Gr. P5 EFW Pipe
  • Chromium Molybdenum P5 EFW Pipe Supplier

Alloy Steel ASTM A335 P5 Pipe Wall thickness & Tolerance

Alloy ASTM A335 Hot rolled Outside Diameter, mm Tolerance, %
OD≤101.6, WT≤2.4 +40/-0
OD≤101.6, 2.4＜WT≤3.8 +35/-0
OD≤101.6, 3.8＜WT≤4.6 +33/-0
OD≤101.6, WT>4.6 +28/-0
OD>101.6, 2.4＜WT≤3.8 +35/-0
OD>101.6, 3.8＜WT≤4.6 +33/-0
OD>101.6, WT>4.6 +28/-0
Cold Drawn Outside Diameter, mm Tolerance, %
OD≤38.1 +20/-0
OD>38.1 +22/-0
ASTM A530 NPS Outside Diameter, inch Tolerance, %
1/8≤OD≤2-1/2 +20.0/-12.5
3≤OD≤18, WT/OD≤5% +22.5/-12.5
3≤OD≤18, WT/OD>5% +15.0/-12.5
OD≥20, WT/OD≤5% +22.5/-12.5
OD≥20, WT/OD>5% +15.0/-12.5