ASTM A335 P9 T9 Alloy Steel Pipe & Tubes
India’s Leading Alloy Steel P9 ERW Tubes, ASTM A335 P9 Seamless Pipes, Chrome-Moly Pipe, 16Mo3 Piping, UNS S50400 Seamless Pipes Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a standard exporter and stockist of ASTM A335 Gr P9 Pipes, which has Good Resistance to Inter-Granular Corrosion within the As Welded Condition.
Oil quenching of ASTM A335 Gr P9 Rectangular Pipes from temperatures among the degrees of 1800 Degree F to 1950 Degree F (982 Degree C to 1066 Degree C) produces the best electricity and / or put on resistance in addition to corrosion resistance. Ideal for long-time period paintings lifestyles in excessive temperatures, it’s also proof against intergranular corrosion within the chromium carbide precipitation variety. It has barely stepped forward corrosion resistance over kind in strongly oxidizing environments. It is warmness resistant, titanium stabilized, austenitic alloy that is usually used for carrier within side the a thousand Degree F – 1600 Degree F temperature variety.
ASTM A335 Gr P9 Hexagonal Pipes is stabilized metallic plate which gives as its most important benefit an extremely good resistance to intergranular corrosion following publicity to temperatures within the chromium carbide precipitation variety from 800 Degree F to 1500 Degree F (427 Degree C to 816 Degree C). It is stabilized in opposition to chromium carbide formation via way of means of the addition of columbium and tantalum. It is a stabilized, austenitic, chromium metallic containing columbium which lets in for the removal of carbide precipitation, and, consequently, intergranualr corrosion. Pipes alloyed with columbium-tantalum (called niobium) lets in correct mechanical homes at excessive temperatures.
It makes use of columbium as a stabilizing detail to maximize its major feature: resistance to intergranular corrosion. It is stabilized in opposition to chromium carbide formation via way of means of the addition of titanium. This addition in ASTM A335 Gr P9 Electropolish Pipes is made to lessen or get rid of chromium carbide precipitation – because of welding or publicity to excessive temperatures. They are used due to the fact they may be now no longer touchy to intergranular corrosion after heating in the carbide precipitation variety of 425 Degree C – 850 Degree C. It additionally improves the expanded temperature homes of the alloy.
Largest Manufacturer & Supplier of Cr-Mo T9 Industrial Seamless Tubing, ASTM A335 T9 Seamless Tubes, Chrome Moly Piping, DIN 1.7386 Seamless Pipes, Alloy Steel P9 Hexagonal Pipes in Mumbai, India.
ASTM A335 P9 T9 Alloy Steel Pipe & Tubing Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Alloy Steel P9 T9 | 1.7386 | S50400 |
Alloy Steel P9 T9 Pipes & Tubes Chemical Composition
| Grade | C | Mn | P | S | Si | Cr | Mo |
| Alloy Steel P9 T9 | 0.15 max | 0.30-0.60 | 0.025 max | 0.025 max | 0.50 max | 4.00-6.00 | 0.45-0.65 |
ASTM A335 P9 Piping & T9 Tubing Mechanical Properties
| Grade | Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
| Alloy Steel P9 T9 | 415 min | 205 min | 30 min |
Specification of ASTM A335 P9 T9 Alloy Steel Pipe & Tubing
| Alloy Steel P9 T9 Pipes Tubes Specifications | ASTM A335 / ASME SA335 |
|---|---|
| Dimensional specification | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
| Outside Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
| Chrome Moly P9 T9 Pipes & Tubes Manufacturing Shapes | Hydraulic, Round, Rectangle, Square, Hex, Honed |
| Alloy Steel P9 T9 Pipes & Tubes Manufacturing Techniques | Seamless |
| ASTM A335 P9 T9 Seamless Pipes & Tubes Size | 1 / 2″ NB – 16″ NB |
| ASTM A335 P9 T9 Welded Pipes & Tubes Size | 1 / 2″ NB – 24″ NB |
| ASTM A335 P9 T9 EFW Pipes & Tubes Size | 6″ NB – 24″ NB |
| Alloy Steel P9 T9 Pipes & Tubes Schedule Thickness Range | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Chrome Moly P9 T9 Pipes & Tubes End Types | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
| Delivery Condition of Alloy Steel P9 T9 Pipes & Tubes | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
| Value Added Services | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
| Inspection and Test Reports | EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports |
| Outside Finish | 2B, No.4, No.1, No.8 Mirror Finish for Alloy Steel Pipes, Finish as per customer Requirements |
| Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Marking | Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo – on request Marked Pipe Sample: ANSI B36.19 ASTM A 335 P9 12″ NB SCH 40S SEAMLESS HEAT NO. XXXX |
| Packing of Chrome Moly P9 Pipes | Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
| Specials | Sizes and Specifications other than above can be on request |
Alloy Steel P9 Pipes & Tubing BSi - British Standards institute
| ASTM International | BSi – British Standards institute | Material |
| A335 Gr. P5 | 3604/625 | 5% Cr 1/2% Mo |
| A335 Gr. P9 | 3604/629 | 9% Cr 1% Mo |
| A335 Gr. P11 | 3604/621 | 1 1/4% Cr 1/2% Mo |
| A335 Gr. P12 | 3604/620 | 1% Cr 1/2% Mo |
| A335 Gr. P22 | 3604/622 | 2 1/4% Cr 1% No |
ASTM A335 P1 Pipe Dimensions, NB Size Schedule
ASTM A335 P9 T9 Alloy Steel Seamless Pipe Sizes
| O.D. x Thickness | O.D x Thickness | O.D x Thickness |
|---|---|---|
| 38.1 x 3.2mm | 57.0 x 4.9mm | 76.2 x 4.0mm |
| 38.1 x 4.0mm | 57.0 x 6.3mm | 76.2 x 5.0mm |
| 38.1 x 6.3mm | 57.0 x 7.9mm | 76.2 x 6.3mm |
| 42.4 x 3.2mm | 60.3 x 3.2mm | 82.5 x 4.5mm |
| 42.4 x 4.0mm | 60.3 x 3.6mm | 88.9 x 3.2mm |
| 44.5 x 3.2mm | 60.3 x 5.0mm | 88.9 x 3.6mm |
| 44.5 x 6.3mm | 63.5 x 3.2mm | 88.9 x 4.0mm |
| 48.3 x 3.2mm | 63.5 x 3.6mm | 101.6 x 3.6mm |
| 48.3 x 3.6mm | 63.5 x 4.0mm | 101.6 x 4.5mm |
| 50.8 x 4.5mm | 63.5 x 6.3mm | 101.6 x 6.3mm |
| 51.0 x 3.2mm | 63.5 x 7.9mm | 114.3 x 3.6mm |
| 51.0 x 3.6mm | 70.0 x 3.2mm | 114.3 x 5.0mm |
| 51.0 x 6.3mm | 70.0 x 3.6mm | 139.7 x 4.0mm |
| 57.0 x 3.2mm | 70.0 x 6.3mm | 139.7 x 5.0mm |
| 57.0 x 3.6mm | 76.2 x 3.6mm | 139.7 x 6.3mm |
| NB | Size | OD | 40S | 5S | 10S | S10 | S20 | S40 | S60 | XS/80S | S80 | S100 | S120 | S140 | S160 | XXS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
| 1/8” | 10.29 | 1.2 | 1.73 | 2.41 | ||||||||||||
| 1/4” | 13.72 | 1.7 | 2.24 | 3.02 | ||||||||||||
| 3/8” | 17.15 | 1.7 | 2.31 | 3.2 | ||||||||||||
| 15 | 1/2” | 21.34 | 2.8 | 1.7 | 2.1 | 2.77 | 3.73 | 3.73 | 4.78 | 7.47 | ||||||
| 20 | 3/4” | 26.67 | 2.9 | 1.7 | 2.1 | 2.87 | 3.91 | 3.91 | 5.56 | 7.82 | ||||||
| 25 | 1” | 33.4 | 3.4 | 1.7 | 2.8 | 3.38 | 4.55 | 4.55 | 6.35 | 9.09 | ||||||
| 32 | 1 1/4” | 42.16 | 3.6 | 1.7 | 2.8 | 3.56 | 4.85 | 4.85 | 6.35 | 9.7 | ||||||
| 40 | 1 1/2” | 48.26 | 3.7 | 1.7 | 2.8 | 3.68 | 5.08 | 5.08 | 7.14 | 10.2 | ||||||
| 50 | 2” | 60.33 | 3.9 | 1.7 | 2.8 | 3.91 | 5.54 | 5.54 | 9.74 | 11.1 | ||||||
| 65 | 2 1/2” | 73.03 | 5.2 | 2.1 | 3.1 | 5.16 | 7.01 | 7.01 | 9.53 | 14 | ||||||
| 80 | 3” | 88.9 | 5.5 | 2.1 | 3.1 | 5.49 | 7.62 | 7.62 | 11.1 | 15.2 | ||||||
| 90 | 3 1/2” | 101.6 | 5.7 | 2.1 | 3.1 | 5.74 | 8.08 | 8.08 | ||||||||
| 100 | 4” | 114.3 | 6 | 2.1 | 3.1 | 6.02 | 8.56 | 8.56 | 11.1 | 13.5 | 17.1 | |||||
| 125 | 5” | 141.3 | 6.6 | 2.8 | 3.4 | 6.55 | 9.53 | 9.53 | 12.7 | 15.9 | 19.1 | |||||
| 150 | 6” | 168.3 | 7.1 | 2.8 | 3.4 | 7.11 | 10.97 | 11 | 14.3 | 18.3 | 22 | |||||
| 200 | 8” | 219.1 | 8.2 | 2.8 | 3.8 | 6.4 | 8.18 | 10.3 | 12.7 | 12.7 | 15.1 | 19.3 | 20.6 | 23 | 22.2 | |
| 250 | 10” | 273.1 | 9.3 | 3.4 | 4.2 | 6.4 | 9.27 | 12.7 | 12.7 | 15.1 | 19.3 | 21.4 | 25.4 | 28.6 | 25.4 | |
| 300 | 12” | 323.9 | 9.5 | 4 | 4.6 | 6.4 | 10.3 | 14.3 | 12.7 | 17.5 | 21.4 | 25.4 | 28.6 | 33.3 | 25.4 | |
| 350 | 14” | 355.6 | 9.5 | 4 | 4.8 | 6.4 | 7.9 | 11.1 | 15.1 | 12.7 | 19.1 | 23.8 | 27.8 | 31.8 | 35.7 | |
| 400 | 16” | 406.4 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 12.7 | 16.7 | 12.7 | 21.4 | 26.2 | 31 | 36.5 | 40.5 | |
| 450 | 18” | 457.2 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 14.3 | 19.1 | 12.7 | 23.8 | 29.4 | 34.9 | 39.7 | 45.2 | |
| 500 | 20” | 508 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 15.1 | 20.6 | 12.7 | 26.2 | 32.5 | 38.1 | 44.5 | 50 | |
| 550 | 22” | 558.8 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 22.2 | 12.7 | 28.6 | 34.9 | 41.3 | 47.6 | 54 | ||
| 600 | 24” | 609.6 | 9.5 | 5.5 | 6.4 | 6.4 | 9.5 | 17.5 | 24.6 | 12.7 | 31 | 38.9 | 46 | 52.4 | 59.5 | |
| 650 | 26” | 660.4 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
| 700 | 28” | 711.2 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
| 750 | 30” | 762 | 9.5 | 6.4 | 7.9 | 7.9 | 13 | 12.7 | ||||||||
| 800 | 32” | 812.8 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
| 850 | 34” | 863.6 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
| 900 | 36” | 914.4 | 9.5 | 7.9 | 13 | 19.1 | 12.7 |
ASTM A335 Alloy Steel P9 T9 Heat Treatment Requirements
| Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing or Tempering Temperature Range F [C] |
|---|---|---|---|
| ASTM A335 P5 Pipe(b,c) | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| Subcritical Anneal (P5c only) | ***** | 1325 – 1375 [715 – 745] | |
| ASTM A335 P9 Pipe | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| ASTM A335 P11 Pipe | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1200 [650] | |
| ASTM A335 P22 Pipe | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| ASTM A335 P91 Pipe | Normalize and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
| Quench and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
Alloy Steel ASTM A335 P9 Pipes Price List
| Size | MSL Make | ISMT make | JSL Make |
| 1/2″ | 4,264.71 | 4,257.35 | 4,272.06 |
| 3/4″ | 4,044.12 | 4,036.76 | 4,051.47 |
| 1″ | 3,897.06 | 3,889.71 | 3,904.41 |
| 1.25″ | 3,852.94 | 3,845.59 | 3,860.29 |
| 1.5″ | 3,750.00 | 3,742.65 | 3,757.35 |
ASTM A335 P9 Alloy Steel Seamless Pipe Outside Diameter & Tolerance
| ASTM A450 | Hot rolled | Outside Diameter, mm | Tolerance, mm |
| OD≤101.6 | +0.4/-0.8 | ||
| 101.6?OD≤190.5 | +0.4/-1.2 | ||
| 190.5?OD≤228.6 | +0.4/-1.6 | ||
| Cold Drawn | Outside Diameter, mm | Tolerance, mm | |
| OD?25.4 | ±0.10 | ||
| 25.4≤OD≤38.1 | ±0.15 | ||
| 38.1?OD?50.8 | ±0.20 | ||
| 50.8≤OD?63.5 | ±0.25 | ||
| 63.5≤OD?76.2 | ±0.30 | ||
| 76.2≤OD≤101.6 | ±0.38 | ||
| 101.6?OD≤190.5 | +0.38/-0.64 | ||
| 190.5?OD≤228.6 | +0.38/-1.14 | ||
| ASTM A530 & ASTM A335 | NPS | Outside Diameter, inch | Tolerance, mm |
| 1/8≤OD≤1-1/2 | ±0.40 | ||
| 1-1/2?OD≤4 | ±0.79 | ||
| 4?OD≤8 | +1.59/-0.79 | ||
| 8?OD≤12 | +2.38/-0.79 | ||
| OD>12 | ±1% |
ASTM A335 P9 Alloy Steel Pipe Weight Chart
| Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
|---|---|---|---|---|---|---|---|---|
| 1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
| 0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
| 0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
| 0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
| 3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
| 0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
| 0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
| 0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
| 1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
| 0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
| 0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
| 0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
| 1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
| 0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
| 0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
| 0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
| 1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
| 0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
| 0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
| 0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
| 2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
| 0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
| 0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
| 0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
| 0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
| 0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
| 0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
| 2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
| 0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
| 0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
| 0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
| 0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
| 0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
| 0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
| 3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
| 0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
| 0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
| 0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
| 0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
| 0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
| 0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
| 0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
| 0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
| 0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
| 3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
| 0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
| 0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
| 0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
| 0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
| 0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
| 4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
| 0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
| 0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
| 0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
| 0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
| 0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
| 0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
| 0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
| 0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
| 0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
| 0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
| 0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
| 0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
| 5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
| 0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
| 0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
| 0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
| 0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
| 0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
| 0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
| 0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
| 0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
| 0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
| 6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
| 0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
| 0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
| 0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
| 0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
| 0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
| 0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
| 0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
| 0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
| 0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
| 0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
| 0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
| 0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
| 0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
| 0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
| 0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
| 0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
| 1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
| 1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
- UNS S50400 Seamless Pipe
- CrMo P9 Seamless Pipe
- DIN 1.7386 Seamless Pipe
- Chrome Moly Steel P9 Seamless Pipes Supplier
- Alloy Steel P9 Cold Drawn Seamless Pipes
- CrMo P9 Square Pipe
- INOX 1.7386 Square Pipe
- ASTM A335 Gr P9 Alloy Steel Thick Wall Square Pipes
- Chromium Molybdenum P9 Square Pipe Supplier
- Alloy Steel P9 Cold Drawn Square Pipes
- UNS S50400 Rectangular Pipe
- DIN 1.7386 Rectangular Pipe
- ASTM A335 Alloy Steel P9 Rectangular Pipe
- Chrome Moly P9 Rectangular Pipes Supplier
- Alloy Steel P9 Rectangular Pipes
- UNS S50400 Welded Pipe
- DIN 1.7386 Welded Pipe
- EN 10216-5 Welded Piping
- Chrome Moly P9 Welded Pipes Supplier
- Chromium Molybdenum P9 Welded Pipe Supplier
- CrMo P9 Electropolish Pipe
- INOX 1.7386 Electropolish Pipe
- Chrome Moly Steel P9 Electropolish Pipes Supplier
- EN 10217-7 Alloy Gr. P9 Electropolish Pipe
- Chromium Molybdenum P9 Electropolish Pipe Supplier
- UNS S50400 Capillary Tubes
- CrMo T9 Capillary Tubes
- Chrome Moly Steel T9 Capillary Tubes Supplier
- Chromium Molybdenum T9 Capillary Tubes Supplier
- Alloy Steel P9 Cold Drawn Capillary Tubing
- UNS S50400 ERW Pipe
- ASTM A335 Alloy Steel P9 ERW Pipe
- EN 10216-5 ERW Piping
- ASME SA335 Alloy Steel P9 ERW Pipe
- Alloy Steel P9 Cold Drawn ERW Pipes
- UNS S50400 Hollow Pipe
- DIN 1.7386 Hollow Pipe
- EN 10217-7 Alloy Gr. P9 Hollow Pipe
- Chromium Molybdenum P9 Hollow Pipe Supplier
- Alloy Steel P9 Cold Drawn Hollow Pipes
- CrMo P9 EFW Pipe
- DIN 1.7386 EFW Pipe
- Chromium Molybdenum P9 EFW Pipe Supplier
- Alloy Steel P9 Cold Drawn EFW Pipes
- UNS S50400 EFW Piping
Alloy Steel ASTM A335 P9 Pipe Wall thickness & Tolerance
| Alloy ASTM A335 | Hot rolled | Outside Diameter, mm | Tolerance, % |
| OD≤101.6, WT≤2.4 | +40/-0 | ||
| OD≤101.6, 2.4＜WT≤3.8 | +35/-0 | ||
| OD≤101.6, 3.8＜WT≤4.6 | +33/-0 | ||
| OD≤101.6, WT>4.6 | +28/-0 | ||
| OD>101.6, 2.4＜WT≤3.8 | +35/-0 | ||
| OD>101.6, 3.8＜WT≤4.6 | +33/-0 | ||
| OD>101.6, WT>4.6 | +28/-0 | ||
| Cold Drawn | Outside Diameter, mm | Tolerance, % | |
| OD≤38.1 | +20/-0 | ||
| OD>38.1 | +22/-0 | ||
| ASTM A530 | NPS | Outside Diameter, inch | Tolerance, % |
| 1/8≤OD≤2-1/2 | +20.0/-12.5 | ||
| 3≤OD≤18, WT/OD≤5% | +22.5/-12.5 | ||
| 3≤OD≤18, WT/OD>5% | +15.0/-12.5 | ||
| OD≥20, WT/OD≤5% | +22.5/-12.5 | ||
| OD≥20, WT/OD>5% | +15.0/-12.5 |