Stainless Steel ASTM A403 WP 310/310S/310H Pipe Fittings
India’s Leading ASTM A403 SS 310 Concentric Reducer, 310S 180 Deg Elbow, DIN 1.4841 LR Elbow, ANSI B16.28 Stainless Steel 310H Equal Tee, SS 310 Buttweld Elbow Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a permitted supplier of Stainless Steel 310 Pipe Fittings / Stainless Steel 310S Pipe Fittings / Stainless Steel 310H Pipe Fittings, which has first rate resistance to chloride SCC.
Most welding techniques may be used whilst operating with Stainless Steel UNS S31000 Pipe Fittings, besides for oxyacetylene welding. It has ideal to be used round phosphoric, nitric, and sulphuric acids. It is an answer for strain corrosion cracking that could arise whilst chrome steel is delivered to chloride solutions. It is an austenitic metal which became designed for optimum resistance to acid attacks.
It has first rate well-known corrosion resistance to sulphuric acid and to chloride strain corrosion cracking. Annealing of Stainless Steel UNS S31008 Pipe Fittings need to be among 1725 °F and 1850 °F for half-hour at temperature in keeping with inch of thickness. It is a low-carbon, niobium-stabilized austenitic nickel / iron / chromium alloy with additions of contents like copper and molybdenum. It may be correctly bloodless shaped the usage of all not unusual place practices.
It additionally has first rate resistance to crevice corrosion, weathering, and pitting. Chromium in Stainless Steel UNS S31009 Pipe Fittings provides to its resistance of oxidizing environments, like nitric acid, and niobium reduces the consequences of carbide precipitation. It is created with the aid of using the formation of intermetallic carbides on the grain barriers ensuing within the formation of Chromium-depleted zones adjoining to the grain barriers.
It is a super-austenitic stainless alloy advanced for optimum corrosion resistance to sulphuric acid and different competitive environments now no longer appropriate for usual austenitic grades. The corrosion resistance of Stainless Steel WNR 1.4841 Pipe Fittings additionally reveals different makes use of within the electricity generation, plastics, chemical and petrochemical industries.
When strain relieving is preferred, warmness this Stainless Steel WNR 1.4845 Pipe Fittings to a temperature underneath 1000 °F observed with the aid of using water quench after the preferred time at temperature has been established. It is regularly selected to remedy SCC problems, which may also arise with stainless.
Largest Manufacturer & Supplier of UNS S30900 Pipe Elbow, INOX 1.4845 Stub End, SS 310S Pipe Fittings, ASME SA403 SS 310 Pipe Bend, Stainless Steel 310H Pipe Fittings in Mumbai, India.
Stainless Steel ASTM A403 WP 310/310S/310H Pipe Fittings Equivalent Grades
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST |
|---|---|---|---|---|---|---|---|
| SS 310 | S31000 | 1.4841 | – | X2CrNi18-9 / X2CrNi19-11 | SUS 310 | 310S24 | 20Ch25N20S2 |
| SS 310S | S31008 | 1.4845 | – | X8CrNi25-21 | SUS 310S | 310S16 | 20Ch23N18 |
| SS 310H | S31009 | – | – | – | SUS 310H | – | – |
Stainless Steel 310/310S/310H Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
| SS 310H | 0.04 – 0.10 | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | – | 19.00 – 21.00 | 53.885 min |
ASTM A403 SS 310/310S/310H Piping & Tubing Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SS 310/310S/310H | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Physical Properties of ASTM A403 SS 310/310S/310H Pipe Fittings
| SS 310/ SS 310S/SS 310H | |
|---|---|
| Density | 8.0 g/cm3 |
| Melting Point | 1455 °C (2650 °F) |
Specification Of ASTM A403 SS 310/310S/310H Pipe Fittings
| Grade | Stainless Steel 310/310S/310H (UNS S31000/ S31008/S31009) |
|---|---|
| 310/310S/310H Pipe Fittings Specifications | ASTM A403/ ASME SA403 |
| 310/310S/310H SS Pipe Fittings size | 310/310S/310H Seamless Butt Weld Fittings : 1/2″ – 10″ 310/310S/310H Welded Butt Weld Fittings : 1/2″ – 48″ |
| SS 310/310S/310H Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Stainless Steel 310/310S/310H Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| 310/310S/310H Buttweld Pipe Fittings Type | DN15-DN1200 |
| ASTM A403 310/310S/310H Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP310/310S/310H Pipe Fitting |
| Size Range | ½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A403 WP 310/310S/310H Buttweld Fitting |
| Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
| ASTM A403 WP310/310S/310H Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| 310/310S/310H Stainless Steel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 403 WP310/310S/310H Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | SS UNS S31000/ S31008/S31009 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Stainless Steel 310/310S/310H Buttweld Fittings Dimensions Standard
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
310/310S/310H Stainless Steel Pipe Fittings Wall Thickness & Schedule Chart
| Product | Size* | Wall Thickness** | Seamless | Welded | |||||||||||||||||||||
| Elbow | 1/2″-24″ | SCH10S~XXS | √ | √ | |||||||||||||||||||||
| 8″-104″ | SCH5S~80S/XS | √ | |||||||||||||||||||||||
| Tee | 1/2″-24″ | SCH10S~XXS | √ | √ | |||||||||||||||||||||
| 8″-104″ | SCH5S~80S/XS | √ | |||||||||||||||||||||||
| Reducer | 1/2″-24″ | SCH10S~XXS | √ | √ | |||||||||||||||||||||
| 8″-104″ | SCH5S~80S/XS | √ | |||||||||||||||||||||||
| Cap | 1/2″-80″ | SCH10S~SCH160 | √ | ||||||||||||||||||||||
| Lap Joint Stub End | 1/2″-24″ | SCH5S~80S/XS | √ | √ | |||||||||||||||||||||
| 8″-80″ | SCH5S~80S/XS | √ | |||||||||||||||||||||||
Stainless Steel 310/310S/310H Pipe Fittings, Elbow, Reducer Weight Chart
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 90 Deg Elbow | 45 Deg Elbow | Equal tee | 90 Deg Elbow | 45 Deg Elbow | Equal tee | 90 Deg Elbow | 45 Deg Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Stainless Steel 310/310S/310H Elbow 90 Deg, Elbow 45 Deg, Elbow 180 Deg Dimension
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Weight Chart of UNS S31000 Reducing Tee, SS UNS S31008/S31009 Concentric & Eccentric Reducers
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
| 40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
| 50×25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
| 50×40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
| 80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
| 100×50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
| 100×80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
| 150×80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
| 150×100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
| 200×100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
| 200×150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Buttweld Fittings ASME B16.9 WP310/310S/310H Angularity Tolerance
| Nominal Size | DN | 15-100 | 125-200 | 250-300 | 350-400 | 450-600 | 650-750 | 800-1050 | 1100-1200 | 1300-1500 | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NPS | 1/2 – 4 | 5-8 | 10-12 | 14-16 | 18-24 | 26-30 | 32-42 | 44-48 | 52-60 | ||||||||||||||||
| Angularity Tolerance |
Off Angle | Q | 1 | 2 | 3 | 3 | 4 | 5 | 5 | 5 | 6.4 | ||||||||||||||
| Off Plain | P | 2 | 4 | 5 | 6 | 10 | 10 | 13 | 19 | 20 | |||||||||||||||
ASTM A403 Stainless Steel 310/310S/310H Fitting Classes for WP Grades
| CR | Corrosion resistant grade. S through WU Classes do not apply. |
| WP310/310S/310H-S | Seamless |
| WP310/310S/310H-W | Welded, RT or UT all pipe starting material welds made with filler metal. All fitting manufacturer welds except as excluded in A/SA403 paragraph 5.4.3. If UT is substituted for RT, all welds must be examined 100% for their length as required by A/SA403 paragraph 5.6 |
| WP310/310S/310H-WX | RT all welds with or without filler metal. |
| WP310/310S/310H-WU | UT all welds with or without filler metal. |
| WPgrade-grade-class | Insert grades (310/310S/310H) and class (S,W,WX, or WU). Applies to fittings meeting all chemical and physical requirements of both grades. |
ASTM A403 Stainless Steel 310/310S/310H Fitting Pipe Fittings Manufacturing Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Stainless Steel 310/310S/310H Pipe Fittings Standard Chart
| ASTM A403 Grade WP310/310S/310H Buttweld Fittings | |
|---|---|
| SA 403 WP 310/310S/310H Fittings Types | SA 403 Gr 310/310S/310H 90º LRs, 90º SRs, 45º Elbows, SS 310/310S/310H Concentric Reducers, 310/310S/310H SS Eccentric Reducers, Grade WP310/310S/310H Stainless Steel Tees, Reducing Tees and Stub Ends Fittings |
| Sizes | 1/2″ – 12″ |
| Schedules | Sch 10S – 80S |
Types of Stainless Steel WP 310/310S/310H Buttweld Fittings We Supply
| ASTM A403 Gr WP310 45° Long Radius Elbow | INOX 1.4845 SS Short Radius Elbow Exporter |
| Stainless Steel 310 Weldable 1.5D Elbow | 310S SS Two Halve Butt weld Fittings |
| INOX 1.4841 Stub End Exporter | 1 Inch Stainless Steel 310 Buttweld Pipe Fittings |
| X8CrNi25-21 Stainless Steel Two Joint Pipe Fittings | 310 Stainless Steel LR Elbow Supplier |
| SS 310S Wrought Austenitic 45 Degree Elbow | ASTM A403 WP 310 Welded Pipe Fittings |
| X15CrNi25-20 SS 90° Seamless Elbow Dealer | Stainless Steel 310 Pipe Fittings Stockist |