Duplex Steel UNS S31803/2205 Pipe Fittings Manufacturer & Supplier

  • Home
  • Duplex Steel UNS S31803/2205 Pipe Fittings Manufacturer & Supplier

Duplex Steel S31803/S32205 Buttweld Pipe Fittings

India’s Leading ANSI B16.9 Duplex Steel S32205 Buttweld Fittings Supplier, Duplex WERKSTOFF NR. 1.4462 Cross, S31803 Duplex Stainless Steel Dish Cap, UNS S32205 Seamless Fittings, Buy DSS S31803 Butt weld Reducer Manufacturer & Supplier in India.

Kanak Steel & Engg Co. is a permitted manufacturer and exporter of Duplex 2205 Pipe Fittings / Grade UNS N031803 Pipe Fittings, which are typically utilized in Gas, Petrochemical and Oil industries.
It is simply normalised metallic that is being warmness dealt with and as an end result indicates tensile electricity and more yield than the greater preferred grades. They are tremendously praised for its advanced electricity, mild weight, competence, corrosion resistance and maximum beneficial quality. Grade UNS S32205 Elbow Pipe Fittings are thermostatically built and balanced through the use of metallic alloys within the organisation and aid of maximum current technology. They are pretty immune to appalling climate and its chemical composition makes it hard to rust at the same time as the use of in city and business environment. They are pretty regarded for its mild weight, competence, maximum beneficial quality, corrosion resistance and advanced electricity.
The use of corrosion resistance metallic will face the situations higher due to introduction of an enthusiast defensive oxide movie at the floor, if it’s being left undisturbed. Meanwhile, using climate resistant metallic as nicely makes those supply in longer carrier life. Grade UNS S31803 45-Degree Elbow Pipe Fittings is supposed for advanced electricity low alloy structural metallic through 100mm thickness to 345Mpa minimal yield point. It indicates signal of advanced corrosion resistance over preferred carbon metallic because of the increase of a defensive oxide movie at the metals floor which slows down similarly corrosion.
They are pretty famed as ‘the weathering metallic’ and additionally as a protecting layer that develops at the metallic floor whilst used uncoated and in hazardous climate situations. Duplex Steel 2205 90-Degree Elbow Pipe Fittings are immune to horrific climate and its chemical composition makes it immune to rust at the same time as the use of in business and concrete environment. They are getting used for one-of-a-kind varieties of welded, bolted and riveted constructions, for example metallic body structures, tanks and containers, bridges, exhaust systems, cars and system constructions. Obtainable in distinctive tolerances, floor and dimensional properties, they’re very tons identified for his or her ideal sturdiness and quality.

Largest Manufacturer & Supplier of Duplex Steel S31803 Two Joint Pipe Fittings, DIN 1.4462 LR/ SR Elbow Trader, DSS S32205 Reducer Dealer, SAF 2205 Buttweld Elbow, Duplex Stainless Steel S31803 Buttweld Pipe Fittings in Mumbai, India.

Duplex Steel UNS S31803/S32205 Pipe Fittings Equivalent Grades

STANDARD UNS WNR.
Duplex Steel 2205 S31803 / S32205 1.4462

Duplex Steel UNS S31803/S32205 Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
Duplex Steel S31803 0.030 max 2.0 max 1.0 max 0.030 max 0.020 max 22.0 – 23.0 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20
Duplex Steel S32205 0.030 max 2.0 max 1.0 max 0.030 max 0.020 max 21.0 – 23.0 2.50 – 3.50 4.50 – 6.50 0.8 – 0.20

Duplex Steel UNS S31803/S32205 Piping & Tubing Mechanical Properties

Grade Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
S31803 / S32205 7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Specification Of Duplex Steel UNS S31803/S32205 Pipe Fittings

S31803/S32205 Pipe Fittings Specifications ASTM A815/ ASME SA815
S31803/S32205 Duplex Steel Pipe Fittings size S31803/S32205 Seamless Butt Weld Fittings : 1/2″ – 10″
S31803/S32205 Welded Butt Weld Fittings : 1/2″ – 48″
Duplex S31803/S32205 Buttweld Fittings Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Duplex S31803/S32205 Pipe Fittings Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
S31803/S32205 Buttweld Pipe FittingsType DN15-DN1200
ASTM A815 S31803/S32205 Buttweld Fitting Connection Welding
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A815 Grade S31803/S32205 Pipe Fitting
Size Range ½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A815 S31803/S32205 Buttweld Fitting
ASTM A815 S31803/S32205 Buttweld Fittings Manufacturing process Push, Press, Forge, Cast, etc.
S31803/S32205 Duplex Buttweld Pipe Fittings Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
SA 815 S31803/S32205 Pipe Fittings Origin & Mills Japanese, Indian, USA, Korean, European, Ukraine, Russian
Specialized manufacturer of Duplex UNS S31803/S32205, 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

ASTM A815 UNS S31803/S32205 Pipe Elbow Dimensions Standard

NOMINAL PIPE SIZE ALL FITTINGS ALL FITTINGS ELBOWS AND TEES 180 DEG RETURN BENDS 180 DEG RETURN BENDS 180 DEG RETURN BENDS REDUCERS CAPS
NPS O.D. at Bevel (1), (2) I.D. at End
(1), (3), (4)		 Centre -to- End Dimension A, B, C, M Centre-to- Centre O Back-to- Face K Alignment of Ends U Overall Length H Overall Length E
½ to 2½ 0.06
-0.03		 0.03 0.06 0.25 0.25 0.03 0.06 0.12
3 to 3 ½ 0.06 0.06 0.06 0.25 0.25 0.03 0.06 0.12
4 0.06 0.06 0.06 0.25 0.25 0.03 0.06 0.12
5 to 8 0.09
-0.06		 0.06 0.06 0.25 0.25 0.03 0.06 0.25
10 to 18 0.16
-0.12		 0.12 0.09 0.38 0.25 0.06 0.09 0.25
20 to 24 0.25
-0.19		 0.19 0.09 0.38 0.25 0.06 0.09 0.25
26 to 30 0.25
-0.19		 0.19 0.12 … … … 0.19 0.38
32 to 48 0.25
-0.19		 0.19 0.19 … … … 0.19 0.38

ASTM A815 Duplex S31803/S32205 Pipe Fittings Dimensions Standard

Nominal
Pipe
Size		 Outside
Diameter		 Caps Straight Tees Straight Crosses Stub Ends
(inches) (mm) (inches) Length
(inches)		 Center to End
(inches)		 Center to End
(inches)		 Lap Diameter
(inches)		 Long Length
(inches)		 Short Length
(inches)
1/2 21.3 0.840 1 1 – 1 3/8 3 2
3/4 26.7 1.050 1 1 1/8 – 1 11/16 3 2
1 33.4 1.315 1 1/2 1 1/2 1 1/2 2 4 2
1 1/4 42.2 1.660 1 1/2 1 7/8 1 7/8 2 1/2 4 2
1 1/2 48.3 1.900 1 1/2 2 1/4 2 1/4 2 7/8 4 2
2 60.3 2.375 1 1/2 2 1/2 2 1/2 3 5/8 6 2 1/2
2 1/2 73.0 2.875 1 1/2 3 3 4 1/8 6 2 1/2
3 88.9 3.500 2 3 3/8 3 3/8 5 6 2 1/2
3 1/2 101.6 4.000 2 1/2 3 3/4 3 3/4 5 1/2 6 3
4 114.3 4.500 2 1/2 4 1/8 4 1/8 6 3/16 6 3
5 141.3 5.563 3 4 7/8 4 7/8 7 5/16 8 3
6 168.3 6.625 3 1/2 5 5/8 5 5/8 8 1/2 8 3 1/2
8 219.1 8.625 4 7 7 10 5/8 8 4
10 273.1 10.750 5 8 1/2 8 1/2 12 3/4 10 5
12 323.9 12.750 6 10 10 15 10 6

Dimensions Chart Of Duplex Steel 2205 Reducer Fittings

NOMINAL PIPE SIZE OUTSIDE DIAMETER END TO END
Inch D P H
3/4 x 1/2 26.7 21.3 38
3/4 x 3/8 26.7 17.1 38
1 x 3/4 33.4 26.7 51
1 x 1/2 33.4 21.3 51
1 1/4 x 1 42.2 33.4 51
1 1/4 x 3/4 42.2 26.7 51
1 1/4 x 1/2 42.2 21.3 51
1 1/2 x 1 1/2 48.3 42.2 64
1 1/2 x 1 48.3 33.4 64
1 1/2 x 3/4 48.3 26.7 64
1 1/2 x 1/2 48.3 21.3 64
2 x 1 1/2 60.3 48.2 76
2 x 1 1/4 60.3 42.2 76
2 x 1 60.3 33.4 76
2 x 3/4 60.3 26.7 76
2 1/2 x 2 73 60.3 89
2 1/2 x 1 1/2 73 48.3 89
2 1/2 x 1 1/4 73 42.2 89
2 1/2 x 1 73 33.4 89
3 x 2 1/2 88.9 73 89
3 x 2 88.9 60.3 89
3 x 1 1/2 88.9 48.3 89
3 x 1 1/4 88.9 42.2 89
3 1/2 x 3 101.6 88.9 102
3 1/2 x 21/2 101.6 73 102
3 1/2 x 2 101.6 60.3 102
3 1/2 x 1 1/2 101.6 48.3 102
3 1/2 x 1 1/4 101.6 42.2 102
4 x 3 1/2 114.3 101.6 102
4 x 3 114.3 88.9 102
4 x 2 1/2 114.3 73 102
4 x 2 114.3 60.3 102
4 x 1 1/2 114.3 48.3 102
5 x 4 141.3 114.3 127
5 x 3 1/2 141.3 101.6 127
5 x 3 141.3 88.9 127
5 x 2 1/2 141.3 73 127
5 x 2 141.3 60.3 127
6 x 5 168.3 141.3 140
6 x 4 168.3 114.3 140
6 x 3 1/2 168.3 101.6 140
6 x 3 168.3 88.9 140
6 x 2 1/2 168.3 73 140
8 x 6 219.1 168.3 152
8 x 5 219.1 141.3 152
8 x 4 219.1 114.3 152
8 x 3 1/2 219.1 101.6 152
10 x 8 273.1 219.1 178
10 x 6 273.1 168.1 178
10 x 5 273.1 141.3 178
10 x 4 273.1 114.3 178
12 x 10 323.9 273.1 203
12 x 8 323.9 219.1 203
12 x 6 323.9 168.3 203
12 x 5 323.9 141.3 203
14 x 12 355.6 323.9 330
14 x 10 355.6 273.1 330
14 x 8 355.6 219.1 330
14 x 6 355.6 168.3 330
16 x 14 406.4 355.6 356
16 x 12 406.4 323.9 356
16 x 10 406.4 273.1 356
16 x 8 406.4 219.1 356
16 x 6 406.4 168.3 356
18 x 16 457 406.4 381
18 x 14 457 355.6 381
18 x 12 457 323.9 381
18 x 10 457 273.1 381
18 x 8 457 219.1 381
20 x 18 508 457 508
20 x 16 508 406.4 508
20 x 14 508 355.6 508
20 x 12 508 323.9 508
20 x 10 508 273.1 508
20 x 8 508 219.1 508
22 x 20 559 508 508
22 x 18 559 457 508
22 x 16 559 406.4 508
22 x 14 559 355.6 508
22 x 12 559 323.9 508
24 x 10 559 273.1 508
24 x 22 610 559 508
24 x 20 610 508 508
24 x 18 610 457 508
24 x 16 610 406.4 508
24 x 14 610 355.6 508
24 x 12 610 323.9 508
24 x 10 610 273.1 508
Duplex Steel 2205 Pipe Fittings Suppliers In ndia

ASME B16.9 Seamless Duplex Steel UNS S31803 Pipe Fittings, Duplex 2205 Elbow, Din 1.4462 Reducer Weight Chart

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
90 Deg Elbow 45 Deg Elbow Equal tee 90 Deg Elbow 45 Deg Elbow Equal tee 90 Deg Elbow 45 Deg Elbow Equal tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.4 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.61
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91

Duplex Steel S31803/S32205 Elbow 90 Deg, Elbow 45 Deg, Return Elbow 180 Deg Dimension

NPS (Normal Pipe Size) O.D. (Outside Daimeter) Elbow 90 Deg Elbow 45 Deg Return Elbow 180 Deg
(inch) Long Radius Elbow Short Radius Long Radius Elbow Long Radius Elbow
(millimeter/ MM) (inch./ Inches) Center to Face
(Inches)		 Center to Face
(Inches)		 Center to Face
(Inches)		 Radius
(Inches)		 Center to Center
(Inches)		 Back to face
(Inches)
1/2 21.3 0.840 1 1/2 – 5/8 2 1 7/8
3/4 26.7 1.050 1 1/8 – 7/16 2 1/4 1 11/16
1 33.4 1.315 1 1/2 1 7/8 3 2 3/16
1 1/4 42.2 1.660 1 7/8 1 1/4 1 3 3/4 2 3/4
1 1/2 48.3 1.900 2 1/4 1 1/2 1 1/8 3 4 1/2 3 1/4
2 60.3 2.375 3 2 1 3/8 4 6 4 3/16
2 1/2 73.0 2.875 3 3/4 2 1/2 1 3/4 5 7 1/2 5 3/16
3 88.9 3.500 4 1/2 3 2 6 9 6 1/4
3 1/2 101.6 4.000 5 1/4 3 1/2 2 1/4 7 10 1/2 7 1/4
4 114.3 4.500 6 4 2 1/2 8 12 8 1/4
5 141.3 5.563 7 1/2 5 3 1/8 10 15 10 5/16
6 168.3 6.625 9 6 3 3/4 12 18 12 5/16
8 219.1 8.625 12 8 5 12 24 16 5/16
10 273.1 10.750 15 10 6 1/4 15 30 20 3/8
12 323.9 12.750 18 12 7 1/2 18 36 24 3/8

Weight Chart of WERKSTOFF NR. 1.4462 Reducing Tee, Duplex Steel S31803/S32205 Concentric & Eccentric Reducers

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee
40x.25 0.19 0.19 0.60 0.26 0.26 0.76 0.34 0.34 0.90
50×25 0.28 0.28 0.73 0.40 0.40 1.10 0.54 0.54 1.37
50×40 0.31 0.31 0.76 0.45 0.45 1.15 0.59 0.59 1.43
80x.50 0.55 0.55 1.56 1.00 1.00 2.91 1.79 1.79 3.91
100×50 0.78 0.78 2.94 1.50 1.50 4.48 1.95 1.95 6.55
100×80 0.87 0.87 3.04 1.74 1.74 4.64 2.33 2.33 6.79
150×80 1.82 1.82 6.86 3.95 3.95 9.68 5.51 5.51 11.57
150×100 1.96 1.96 7.10 4.07 4.07 11.94 5.96 5.96 11.97
200×100 3.01 3.01 13.46 6.55 6.55 17.98 9.23 9.23 24.18
200×150 3.19 3.19 14.08 6.74 6.74 18.82 10.12 10.12 25.31

ASME SA815 Duplex Steel S31803/S32205 Buttweld Fitting Classes for WP Grades

Class Construction Non-destructive Examination
S Seamless None
W Welded Radiography or Ultrasonic
WX Welded Radiography
WU Welded Ultrasonic

Manufacturing Standards of Duplex Steel S31803/S32205 Buttweld Fittings

American Steel Pipe Fittings Standard
Standard Code Standard Name
ANSI ASME SA-815 Forged Durimet pipe fittings
ANSI ASME B16.9 Factory-Made wrought steel pipe fittings
ANSI ASME B16.28 Wrought steel butt-welding short radius elbows and returns
ISO 5251 Duplex butt-welding fittings
MSS SP-43 Wrought Duplex butt-welding fittings
MSS SP-75 Forging butt-welding fittings
German Steel Pipe Fittings Standard
DIN 2605 Steel butt-welding pipe fittings.elbows and bends
DIN 2615 Steel butt-welding pipe fittings.tees
DIN 2616 Steel butt-welding pipe fittings.reducers
DIN 2617 Steel butt-welding pipe fittings.caps
Japanese Steel Pipe Fittings Standard
JIS B2311 Universal steel butt-welding pipe fittings
JIS B2312 Steel butt-welding pipe fittings
JIS B2313 Steel plate butt-welding pipe fittings
Other Steel Pipe Fittings Standard
EN 1025 3 Butt-welding pipe fittings

Duplex S31803/S32205 Types of Buttweld Fittings We Supply

Duplex S31803 90° Weldable SR Elbow UNS S32205 Pipe Reducers
ASME B16.9 Duplex S32205 90° Reducing Elbow S31803 Duplex Stainless Steel Welded Pipe Fittings
S31803 Duplex 180° LR Return Bend Duplex Steel S31803 Seamless Reducing Tee
S31803 DSS Seamless Fittings Duplex S32205 1D Elbow/3D Elbow/5D Elbow
DSS S31803 Weldable 1.5D Elbow SAF 2205 Two Halve Butt weld Fittings
Duplex Steel 1.4462 Stub End Exporter UNS S31803 Buttweld Pipe Fittings