Abrasion Resistant Hardox 400 Sheets & Plates
Buy Best Price Hardox 400 Wear Plates, NM400 Wear Resistant Steel Plates, Abrex 400 Equivalent Plates, Low-Temperature ABREX 400 Steel Plates, Hardox 400 Abrasion Resistance Clad Plates Manufacturer & Supplier in in Mumbai, India, Russia, Poland.
Suppliers and Manufacturer of Hardox 400 Plates, which has first-rate resistance to carburization. Hardox 400 Perforated Plates has been generally used for his or her resistance to corrosion in non – oxidizing environments inclusive of HCl. We offer high quality and fabulous scraped 400 Hardox (HBW) Plates (hardness 380-420 HBW) is a solidified steel, especially suited for long-haul use in grating situations with high surface weight. Hardox 400 is an abrasion resistant steel with a nominal hardness of 400 HBW. Hardox steel is frequently referred to as a wearing plate because it wears slowly even when subjected to severe mechanical stress. It is more or less double the power of widespread austenitic stainless steels and is likewise to be had in distinctive sizes to our clients.
Hardox 400 Slatting Plates are to a point greater tough to gadget than the alternative collection austenitic steels, in which better slicing forces of the equal are required and greater fast device put on is typical. If the form of the paintings piece isn’t always compact, the rims of Coils can be substantially cooler than the bulk, and there’s danger of cracking within the cooler regions. Hardox 400 Abrasion Resistant Plates offers great properties such as cutting, These Hardox 400 plates offered by us are also acknowledged as wear resistant plates designed to last longer than standard mild steel. Hardox 400 is an all-around wear resistant steel. We are specialized in offering precision engineered Hardox 400 Plate , Hardox 400 Slatting Coils has first-rate resistance to localized corrosion inclusive of inter – granular, pitting and crevice corrosion.
Buy Ready stock of Abrasion Resistant Hardox 400 Steel Plate, Hardox 400 Sheets Suppliers, Hardox 400 Wear Resistant Steel Plate, High Quality Hardox 400 Wear Resistant Steel Plates, Manufacturer & Supplier in Mumbai, India, South America, Kuwait, US, Indonesia, UAE, Philippines.
Hardox 400 Sheets & Plates Chemical Composition
Hardox 400 Plates | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
---|---|---|---|---|---|---|---|---|---|---|---|
thickness mm |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
typv | typv |
3-(8) | 0.15 | 0.7 | 1.6 | 0.025 | 0.01 | 0.3 | 0.25 | 0.25 | 0.004 | 0.33 | 0.23 |
8-20 | 0.15 | 0.7 | 1.6 | 0.025 | 0.01 | 0.5 | 0.25 | 0.25 | 0.004 | 0.37 | 0.27 |
(20)-32 | 0.18 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.25 | 0.25 | 0.004 | 0.48 | 0.29 |
(32)-45 | 0.22 | 0.7 | 1.6 | 0.025 | 0.01 | 1.4 | 0.5 | 0.6 | 0.004 | 0.57 | 0.31 |
(45)-51 | 0.22 | 0.7 | 1.6 | 0.025 | 0.01 | 1.4 | 0.5 | 0.6 | 0.004 | 0.57 | 0.38 |
(51)-80 | 0.27 | 0.7 | 1.6 | 0.025 | 0.01 | 1.4 | 1 | 0.6 | 0.004 | 0.65 | 0.41 |
(80)-130 | 0.32 | 0.7 | 1.6 | 0.025 | 0.01 | 1.4 | 1.5 | 0.6 | 0.004 | 0.73 | 0.48 |
Hardox 400 Sheets & Plates Mechanical Properties
Grade | Mechanical Property | Charpy V Impact Test | |||
---|---|---|---|---|---|
HADOX 400 | Yield | Tensile | Elongation | Degree | longitudinal |
Min Mpa | Mpa | Min % | -40 | J | |
1000 | 1250 | 10 | 45 |
Hardox 400 Sheets & Plates Specification
Item | Abrasion Resistant Plate |
---|---|
Hardox 400 Plate Thickness (H) | 6mm to 100mm |
Hardox 400 wear plate Width (B) | 500mm to 2,500mm |
400hb wear plate Length (L) | 1,000mm to 12,000mm |
Heat Treatment | N, Q+T |
Surface Paint | EP, PE, HDP, SMP, PVDF |
Hardox 400 Wear Resistant Steel Plate Technique | Hot Rolled |
Finish | Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Export to | USA, India, UAE, Saudi Arabia, Singapore, Iraq, Turkey, Indonesia |
Hardox 400 Steel Plate Stock & Sizes
GRADE | GAUGE (INCHES) | WIDTH (INCHES) | LENGTH (INCHES) |
---|---|---|---|
HB 400 / ABREX 400 / Hardox 400 | 0.3750 | 60/96/120 | 480 |
Hardox 400 Wear Clad Steel Plate | 0.5000 | 60/96/120 | 480 |
Hardox 400 Wear Plate | 0.6250 | 60/96/120 | 480 |
Abrex 400 Wear Plate | 0.7500 | 60/96/120 | 480 |
Material Hardox 400 Wear Resistant Steel Plate | 0.8750 | 60/96/120 | 480 |
Dillidur 400 Wear Plate Material | 1.0000 | 60/96/120 | 480 |
Hardox 400 Material Wear Resistant Plate | 1.1250 | 60/96/120 | 480 |
Hardox 400 Hb Clad Steel Plate | 1.2500 | 60/96/120 | 480 |
Rolling Hardox 400 Wear Plate Material | 1.5000 | 60/96/120 | 480 |
Hardox 400 Steel Plate | 1.7500 | 60/96/120 | 480 |
Steel Hardox 400 Plate | 2.0000 | 60/96/120 | 480 |
400 Hb Wear Resistant Steel Plate | 2.2500 | 60/96/120 | 480 |
High Wear Resistant Steel 400 Plate | 2.5000 | 60/96/120 | 480 |
High Wear Resistant 400 Hb Clad Plate | 2.7500 | 60/96/120 | 480 |
High Wear Resistant Material 400 Hb Plate | 3.0000 | 60/96/120 | 480 |
Wear Resistant Steel 400 Hb Clad Plate | 3.5000 | 60/96/120 | 480 |
Abrasion Resistant Steel Hardox 400 Plate | 4.0000 | 60/96/120 | 480 |
Hardox 400 Plate Type
Hardox 400 Wear Resistance Plates | Ramor 400 Pressure Vessel Steel Plates |
Abrasion Resistant Creusabro 400 Steel Plates | Hardox 400 Equivalent Plate |
Hardox 400 Wear Abrasion Resistant Sheet Plates | Low-Temperature Hardox 400 Steel Plates |
EN 10051 Abrex 400 Plate | Hardox 400 Pressure Vessels Plate |
Hardox 400 Hardness Plate | High Tensile Hardox 400 Steel Plates |