Haynes 230 Round Bar & Rods Manufacturer & Supplier

  • Home
  • Haynes 230 Round Bar & Rods Manufacturer & Supplier

HAYNES 230 Round Bars & Rods

India’s Leading Steel Haynes Alloy 230 Round Bars, Hot Rolled Haynes Alloys 230 Round Rods, Haynes Alloys 230 Hex Bars, Haynes 230 Hollow Bars, UNS N06230 Wire Manufacturer & Supplier in India.

Suppliers and Manufacturer of HAYNES 230 Sheets / Round Bars, which are normally used for improved temperature packages. Haynes 230 Slatting Sheets, which may be welded without the ensuing problem of carbon precipitation. The greater critically carburizing atmospheres of business warmth treating furnaces require Haynes 230 Slatting Sheets, which may be welded without the ensuing problem of carbon precipitation. The material is oxidation resistant as well. Navstar Steel is a leading manufacturer and supplier of the Haynes 230 Round Bar in different forms and shapes. Due to its noticeably excessive chromium and nickel content, it’s miles advanced in maximum and so is recommended for packages wherein sensitization might also additionally pose a problem. The material has superior resistance to high temperatures and retains the strength at elevated temperatures. The Haynes 188 Rod is a cobalt nickel tungsten alloy with 39% cobalt, 22% nickel, 22% chromium and 14% tungsten. It is tremendous to be used in improved temperature, and sulfur-bearing fueloline environments.

It incorporates each chromium and nickel metals as the primary non – iron constituents. Just like general metal, it may get marked up with the aid of using fingerprints and grease, increase discoloration, and subsequently rust. It has very high tensile and yield strength even at elevated temperatures. At room temperature the minimum yield strength is 483MPa and the minimum tensile strength is 991MPa. Haynes Alloy 230 Square Bars is a version of the primary metal grade, with a better chromium and decrease carbon content. They are very vital alloys utilized in diverse excessive temperature packages. Another variation Haynes 25 Flat Bar has 51% cobalt, 10% nickel, 20% chromium and 15% tungsten. It reveals top notch corrosion resistance to a huge variety of corrosive environments. However, excessive temperature packages make Haynes UNS N06230 Bars vital to look at their mechanical residences at improved temperatures. The Haynes 230 Welding Rod has nickel, chromium, iron, molybdenum, lanthanum, aluminum, carbon, manganese, silicon, boron, cobalt and tungsten in the composition. It has a melting range of 1301 to 1371 degrees Celsius. Due to the high mechanical properties and high operating temperatures, the material is used in various applications. The low carbon permits Sheets to be welded without sensitization to inter-granular corrosion because of chromium carbide precipitation within the grain boundaries.

Largest Manufacturer & Supplier of Haynes 230 Flat Bars, Udimet 230 Bright Bar, 230 Haynes Square Bars, Haynes 230 Tig Welding Wire, Haynes 230 Rectangular Bars in Mumbai, India.

HAYNES 230 Round Bar Equivalent Grades

STANDARD WERKSTOFF NR. UNS
Haynes 230 – N06230

UNS R06230 Round Bar & Rods Chemical Composition

Grade C Mn P S Si Ni Cr Fe W B La Co Ai Ti Cu La Mo
Haynes 230 0.05-0.15 0.30-1.0 0.03 max 0.015 max 0.25-0.75 Rem 20.0-24.0 3.0 max 13.0-15.0 0.015 max 0.005-0.05 5.0 max 0.20-0.50 0.10 max 0.50 max 0.005-0.05 1.0-3.0

HAYNES 230 Round Bars Mechanical Properties

Elementth Tensile Strength Yield Strength (0.2%Offset) Elongation Hardness HB
Haynes 230 ksi – 758, MPa – 110 ksi – 310, MPa – 45 35 % 241 max

Specification of AMS 5878 HAYNES 230 Round Bar & Rods

Haynes 230 Bar Standard AMS 5772 / AMS 5608
Haynes 230 Bar Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Haynes 230 Flat Bar size Thickness: 2 -100mm
Width: 10 to 500mm
Haynes 230 Square Bar size 4 to 100mm
Haynes 230 Round Bar size Diameter: 3-~800mm
Haynes 230 Hex Bar size 2-100mm A/F
Haynes 230 Angle Bar size 3mm*20mm*20mm~12mm*100mm*100mm
Haynes 230 Rectangular Bars Section 3.0 to 12.0mm thickness
Haynes 230 Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Haynes 230 Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Haynes 230 Threaded Bar Billet Size 1/2 to 495mm Diameter
Haynes 230 Rectangular Size 33 x 30mm to 295 x 1066mm
Haynes 230 Hex Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Haynes 230 Cold Rolled Bar Technique Haynes 230 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Haynes 230 Rod Processing Bar cutting to 650mm
AMS 5878 Haynes 230 Hollow Bar Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
AMS 5878 Haynes 230 T-Bar Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Rolled Haynes 230 Flat Bars Condition Hardened & tempered, annealed
Haynes 230 Rounds Bar Form Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.
Our Haynes 230 Round Bar conforms to NACE MR0175/ISO 15156

AMS 5878 HAYNES 230 Round Bars Size Chart

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Cold Drawn and Polish 3.00 – 75.00 1/8 – 3.00 h8-h9-h10-h11
Cold Drawn and Ground 10.00 – 75.00 5/6 – 2.50 h8-h9-h10-h11
Peeled and Polished 40.00 – 150.00 1.50 – 6.00 h11, h11-DIN 1013
Peeled and Ground 20.00 – 50.00 3/4 – 2.00 h9-h10-h11

Dimensions Of Hot Rolled HAYNES 230 Round Bar

Diameter or
Width
(mm)		 Weight per meter Sectional Area Perimeter
Square
(kg)		 Round
(kg)		 Square
(cm²)		 Round
(cm²)		 Square
(cm)		 Round
(cm)
5.0 0.20 0.15 0.25 0.20 2.0 1.57
5.5 0.24 0.19 0.30 0.24 2.2 1.78
6.0 0.28 0.22 0.36 0.28 2.4 1.88
7.0 0.38 0.30 0.49 0.38 2.8 2.20
8.0 0.50 0.39 0.64 0.50 3.2 2.51
9.0 0.64 0.50 0.81 0.64 3.6 2.83
10 0.73 0.63 1.00 0.79 4.0 3.14
11 0.95 0.75 1.21 0.95 4.4 3.46
12 1.13 0.89 1.44 1.13 4.8 3.77
14 1.54 1.21 1.96 1.54 5.6 4.40
16 2.01 1.58 2.56 2.01 6.4 5.03
18 2.54 2.00 3.24 2.54 7.2 5.65
20 3.14 2.47 4.00 3.14 8.0 6.28
22 3.80 2.98 4.84 3.80 8.8 6.91
25 4.91 3.85 6.25 4.91 10.0 7.85
28 6.15 4.83 7.84 6.16 11.2 8.80
32 8.04 6.31 10.24 8.04 12.8 10.05
36 10.17 7.99 12.96 10.18 14.4 11.31
40 12.56 9.86 16.00 12.57 16.0 12.57
45 15.90 12.49 20.25 15.90 18.0 14.14
50 19.62 15.41 25.00 19.64 20.0 15.71
56 24.62 19.34 31.36 24.63 22.4 17.59
63 31.16 24.47 36.69 31.17 25.2 19.79
71 39.57 31.08 50.41 39.59 28.4 22.31
80 50.24 39.46 64.00 50.27 32.0 25.13

HAYNES 230 Round Bar Size Chart

HAYNES 230 Round Bar Size & Dimensions
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

Weight Chart HAYNES 230 Round Bar

HAYNES 230 Bar Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot
1/8″ 0.062 0.019 22 millimeter 2.979 0.908 3 to 1/4″ 41.996 12.800
3 millimeter 0.055 0.017 20 millimeter 2.470 0.753 3″ 35.762 10.900
4 millimeter 0.098 0.030 24 millimeter 3.543 1.080 3 to 3/4″ 55.780 17.001
5/32″ 0.095 0.029 7/8″ 3.038 0.926 3 to 1/2″ 48.772 14.850
5 millimeter 0.154 0.047 1″ 3.970 1.210 4 to 1/4″ 72.249 21.908
3/16″ 0.141 0.043 25 millimeter 3.871 1.180 4″ 63.340 19.306
6 millimeter 0.223 0.068 27 millimeter 4.490 1.368 4 to 3/4″ 90.249 27.366
7/32″ 0.190 0.058 26 millimeter 4.170 1.271 4 to 1/2″ 80.340 24.4487
7 millimeter 0.298 0.091 30 millimeter 5.548 1.691 5 to 1/2″ 121.000 36.690
1/4″ 0.249 0.076 1 to 1/8″ 5.033 1.534 5″ 99.940 30.461
8 millimeter 0.398 0.120 32 millimeter 6.314 1.894 6 to 1/2″ 167.630 51.093
5/16″ 0.387 0.118 1 to 1/4″ 6.349 1.924 6″ 143.900 43.860
3/8″ 0.557 0.170 35 millimeter 7.553 2.390 7 to 1/2″ 225.000 68.226
9 millimeter 0.498 0.152 1 to 3/8″ 7.550 2.303 7″ 196.000 59.432
11 millimeter 0.748 0.228 38 millimeter 8.903 2.792 10″ 397.140 121.048
10 millimeter 0.620 0.189 36 millimeter 7.999 2.438 8″ 254.55 77.586
12 millimeter 0.889 0.271 40 millimeter 9.872 3.009
7/16″ 0.761 0.232 1 to 1/2″ 8.951 2.715
13 millimeter 1.043 0.318 1 to 3/4″ 12.179 3.712
1/2″ 0.994 0.303 1 to 5/8″ 10.449 3.200
9/16″ 1.256 0.383 1 to 7/8″ 13.977 4.260
14 millimeter 1.207 0.368 45 millimeter 12.555 3.807
5/8″ 1.551 0.473 50 millimeter 15.414 4.698
15 millimeter 1.391 0.424 48 millimeter 14.205 4.330
17 millimeter 1.791 0.543 2 to 1/8″ 17.963 5.475
16 millimeter 1.578 0.481 2″ 15.906 4.848
18 millimeter 2.001 0.610 60 millimeter 22.205 6.768
11/16″ 1.880 0.573 2 to 1/4″ 20.128 6.135
3/4″ 2.237 0.682 2 to 3/8″ 22.435 6.838
2 to 1/2″ 24.856 7.576
2 to 5/8″ 27.409 8.354
2 to 3/4″ 30.083 9.169

HAYNES 230 Flat Bar Size

Sizes in mm Size (inch) Thickness (mm) Thickness (in Inches)
22 7/8 17 & 18 2/3 – 5/7
25 1 5 to 20 3/16 – 4/5
30 1-3/16 5 to 20 3/16 – 4/5
32 1-1/4 6 to 20 1/4 – 4/5
35 1-3/8 5 to 20 3/16 – 3/16
40 1-4/7 5 to 25 3/16 – 1
45 1-7/9 5 to 25 3/16 – 1
47 1-6/7 17,25 & 32 2/3, 1 & 1-1/4
50 2 5 to 32 3/16 – 1-1/4
55 2-1/16 5 to 25 3/16 – 1
57 2-1/4 32 1-1/4
60 2-3/8 5 to 35 3/16 – 1-3/8
63 2-1/2 10 to 30 3/8 – 1-3/16
65 2-5/9 10 to 30 & 35 3/8 – 1-3/16, & 1-3/8
70 2-3/4 6 to 25 & 40 1/4 – 1, & 1-4/7
75 3 8 to 25 5/16 – 1
80 3-1/8 8 to 20 5/16 – 4/5
90 3-1/2 8 to 20 5/16- 4/5
100 4 8, 10, 12 5/16, 3/8, 1/2

HAYNES 230 Square Bar Size Chart

HAYNES 230 Square bar – Metric Sizes and Weights
Square Bar Size KG’s per Metre Standard Length (Metres) Colour Code
10 x 10 0.81 6.0 Yellow
12 x 12 1.16 6.0 Pink
16 x 16 2.06 6.0 Grey
20 x 20 3.22 6.0 Green
25 x 25 5.03 6.0 Purple
32 x 32 8.24 6.0 Orange
40 x 40 12.8 6.0 Yellow
50 x 50 20.12 6.0 Green

Tolerances of Turned HAYNES 230 Round Bar

Turned HAYNES 230 Round Bar Tolerances
HAYNES 230 Round Bar Size, diameter Permitted Variation
milimeter milimeter
> 18 ≦ 30
≧ 6 ≦ 18
> 400
> 50 ≦ 80
> 30 ≦ 50
> 120 ≦ 180
> 80 ≦ 120
> 250 ≦ 315
> 180 ≦ 250
> 315 ≦ 400		 + 0 to – 0.085
+ 0 to – 0.070
+ 0 to – 0.230
+ 0 to – 0.120
+ 0 to – 0.140
+ 0 to – 0.185
+ 0 to – 0.160
+ 0 to – 0.210
+ 0 to – 0.250
HAYNES 230 Bars Section/Shape diameter, width or Size across flats variation Permitted
millimeter millimeter
Flat (Thickness) < 18
> 30 ≦ 50
> 18 ≦ 30
> 50 ≦ 80		 + 0 to – 00.110
+ 0 to – 00.250
+ 0 to – 00.130
+ 0 to – 00.350
Square and Hexagon > 18 ≦ 30
≥ 6 ≦ 18
> 30 ≦ 50
> 80 ≦ 105
> 50 ≦ 80		 + 0 to – 00.110
+ 0 to – 00.090
+ 0 to – 00.130
+ 0 to – 00.250
+ 0 to – 00.160
Round > 18 ≦ 30
≥6 ≦ 18
> 30 ≦ 50
> 80 ≦ 100
> 50 ≦ 80		 + 0 to – 00.085
+ 0 to – 00.070
+ 0 to – 00.100
+ 0 to – 00.140
+ 0 to – 00.120
Flat (Width) < 18
> 30 ≦ 50
> 18 ≦ 30
> 50 ≦ 80
> 160 ≦ 320
> 100 ≦ 130
> 80 ≦ 100
> 130 ≦ 160		 + 0 to – 00.110
+ 0 to – 00.160
+ 0 to – 00.130
+ 0 to – 00.190
+ 1.00 to – 1.00
+ 0 to – 00.350
+ 0 to – 00.220
+ 0 to – 1.00

HAYNES 230 Hex Bar Sizes

Size (mm) Weight (kg/m) Size (mm) Weight (kg/m) Size (mm) Weight (kg/m)
7 x 7 0.337 19 x 19 2.479 38 x 38 9.916
8 x 8 0.44 20 x 20 2.747 40 x 40 10.988
9 x 9 0.556 21 x 21 3.029 42 x 42 12.114
10 x 10 0.687 22 x 22 3.324 45 x 45 13.906
11 x 11 0.831 24 x 24 3.956 48 x 48 15.822
12 x 12 0.989 25 x 25 4.292 50 x 50 17.168
13 x 13 1.161 26 x 26 4.642 53 x 53 19.29
14 x 14 1.346 28 x 28 5.384 55 x 55 20.774
15 x 15 1.545 30 x 30 6.181 60 x 60 24.723
16 x 16 1.758 32 x 32 7.032 65 x 65 29.015
17 x 17 1.985 34 x 34 7.939 70 x 70 33.65
18 x 18 2.225 36 x 36 8.9 75 x 75 38.629

HAYNES 230 Round Bar Surface Finishes

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled
  • Haynes 230 Round Bars
  • UNS N06230 Round Bars
  • AMS 5878 Haynes 230 Round Bars
  • Nickel Alloys Grade 230 Round Bars
  • Haynes 230™ Cobalt Alloy Round Bars
  • Haynes 230 Flat Bars
  • UNS N06230 Flat Bars
  • Haynes 230™ Cobalt Alloy Flat Bars
  • AISI Haynes 230 Flat Bars
  • Udimet Alloy 230 Flat Bars
  • Haynes 230 Cold Drawn Bars
  • UNS N06230 Cold Drawn Bars
  • AMS 5878 Haynes 230 Cold Drawn Bars
  • Haynes 230™ Cobalt Alloy Cold Drawn Bars
  • Udimet Alloy 230 Cold Drawn Bars
  • Haynes 230 Square Bars
  • UNS N06230 Square Bars
  • AMS 5878 Haynes 230 Square Bars
  • Nickel Alloys Grade 230 Square Bars
  • AISI Haynes 230 Square Bars
  • Haynes 230 Rectangular Bars
  • UNS N06230 Rectangular Bars
  • AMS 5878 Haynes 230 Rectangular Bars
  • AISI Haynes 230 Rectangular Bars
  • Udimet Alloy 230 Rectangular Bars
  • Haynes 230 Hot Rolled Bars
  • UNS N06230 Hot Rolled Bars
  • AMS 5878 Haynes 230 Hot Rolled Bars
  • Haynes 230™ Cobalt Alloy Hot Rolled Bars
  • AISI Haynes 230 Hot Rolled Bars
  • Haynes 230 Hex Bars
  • UNS N06230 Hex Bars
  • AMS 5878 Haynes 230 Hex Bars
  • Nickel Alloys Grade 230 Hex Bars
  • Haynes 230™ Cobalt Alloy Hex Bars
  • Haynes 230 Threaded Bars & Rods
  • UNS N06230 Threaded Bars & Rods
  • AMS 5878 Haynes 230 Threaded Bars & Rods
  • Haynes 230™ Cobalt Alloy Threaded Bars & Rods
  • AISI Haynes 230 Threaded Bars & Rods
  • Haynes 230 Hollow Bars
  • UNS N06230 Hollow Bars
  • AMS 5878 Haynes 230 Hollow Bars
  • Haynes 230™ Cobalt Alloy Hollow Bars
  • AISI Haynes 230 Hollow Bars
Haynes 230 Hot Rolled Sheets Haynes 230 Cold Rolled Sheets
Haynes 230 Sheets AMS 5878 Haynes 230@ CR Sheets
AMS 5878 Haynes 230 Sheets UNS N06230 Haynes Sheets & Plates
Nickel Alloy Haynes 230 HR Sheets Haynes 230 Sheets
Udimet Alloy 230 ® Sheets Udimet Alloy 230 ® Plates