ASTM A182 Super Duplex Steel S32750/S32760 Forged Fittings
India’s Leading ASTM A182 S32750 Super Duplex Steel Forged Fittings, INOX 1.4410 Threaded Nipple, UNS S32760 Threaded Pipe Cap, Super Duplex 2507 Forged Tees, ASME SA182 SDSS S32760 Forged Bushing Manufacturer & Supplier in India.
Suppliers and Manufacturer of Super Duplex UNS S32750 / UNS S32760 Forged Threaded Fittings & Forged Socket Weld Fittings, which are cleaned, passivized, polished and ready for instant use. Super Duplex S32750 / S32760 Forged Threaded Tee Fittings also are utilized in warmth exchangers, commercial boilers, nuclear strength, manner pipe traces and thermal strength era amongst others. SDSS S32750 / S32760 Forged Socket Weld Fittings have the best corrosion resistance to stress corrosion cracking. Grade S32750 / S32760 Super Duplex Forged Threaded Tee Fittings also are utilized in warmth exchangers, commercial boilers, nuclear strength, manner pipe traces and thermal strength era amongst others. Super Duplex Steel S32750 / S32760 Forged Socket Weld Fittings Lateral Tee Fittings are rather favored for his or her seamless finish, inflexible production and abrasion resistance. As one of the main suppliers, we emphases our strength in giving difficult to discover sizes for packages within the petrochemical, pharmaceutical, oil and fueloline, chemical and meals processing industries.
Super Duplex WNR 1.4410 Forged Socket Weld Coupling Fittings may be utilized in drainage, sewers, water supply, vents, compressed fueloline and air traces, critical vacuum systems, HVAC, pump drains, and at any area in which plumbing fittings might be used to attach elements of pipe. we are suppliers of ASME SA182 SDSS UNS S37250 / S37260 Forged Socket Weld Tees that defy crevice corrosion. Hydrogen Induced Stress Cracking (HISC) in Super Duplex S32750 / S32760 Forged Socket Weld Coupling Fittings is an embrittlement phenomenon which may occur in catholically protected subsea steel constructions in the presence of high tensile stresses. Duplex steel S32760 forged threaded cross fittings can be heated worked at the temperature between 1100 Degree C to 1250 Degree C. Duplex steel S32750 Forged Socket Weld Fittings bend fittings have good corrosion resistance to pitting and crevice corrosion. Super Duplex 2507 Forged Socket Weld Cap Fittings is a pipe, that’s having a tubular phase or hole cylinder, and normally however now no longer essentially of sphere-formed cross-section. Meanwhile, we emphasis our strength in imparting excessive excellent of grades which might be very a lot proof against corrosion.
Largest Manufacturer & Supplier of Super Duplex Steel UNS S32750 Socket Weld 45 Deg Elbow, UNS S32750 Half Coupling, Super Duplex Stainless Steel S32760 Forged Cap, SDSS S32750 Coupling, SAF 2507 Equal Tee in Mumbai, India.
Super Duplex Steel S32750/S32760 Forged Fittings Equivalent Grades
| STANDARD | UNS | WERKSTOFF NR. |
| Super Duplex 2507 | S32750 / S32760 | 1.4410 |
Super Duplex Steel S32750/S32760 Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| S32750 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
| S32760 | 0.05 max | 1.00 max | 1.00 max | 0.030 max | 0.010 max | 24.00 – 26.00 | 3.00 – 4.00 | 6.00 – 8.00 | 0.20 – 0.30 | 57.61 min |
Super Duplex Steel S32750/S32760 Threaded/ Socket Weld Forged Fittings Mechanical Properties
| Grades | Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
| S32750 / S32760 | 7.8 | 0.281 | 1350 | 2460 |
Super Duplex Steel S32750/S32760 Forged Fittings Physical Properties
| Density | lb/in3 | 0.28 |
|---|---|---|
| Modulus of Elasticity | psi x 106 | 29 |
| Coefficient of Thermal Expansion 68-212°F/°F |
x10-6/°F | 7.2 |
| Thermal Conductivity | Btu/h ft °F | 8.7 |
| Heat Capacity | Btu/lb/°F | 0.12 |
| Electrical Resistivity | W-in x 10-6 | 31.5 |
Specification Of Super Duplex Steel S32750/S32760 Threaded/ Socket Weld Forged Fittings
| Specifications | ASTM B564/ ASME SB564 |
|---|---|
| Size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Types | Socketweld Fittings, Screwed-Threaded Fittings |
| Pressure Rating | Threaded End-2000lb/ 3000lb/ 6000lbs Socket-weld End-3000/ 6000/ 9000lbs |
| Thread | NPT, BSPT, BSPP |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plugs |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
ASTM A182 Super Duplex Steel S32750/S32760 Socket Weld Forged Fittings Size Range & Dimensions
| DN-NPT | MAJOR DIAMETER MM | TAPPING /DRILL SIZE MM | TPI | PITCH MM |
|---|---|---|---|---|
| 1/16″ | 7.895 | 6.00 | 27 | 0.941 |
| 1/8″ | 10.242 | 8.25 | 27 | 0.941 |
| 1/4″ | 13.616 | 10.70 | 18 | 1.411 |
| 3/8″ | 17.055 | 14.10 | 18 | 1.411 |
| 1/2″ | 21.223 | 17.40 | 14 | 1.814 |
| 3/4″ | 26.568 | 22.60 | 14 | 1.814 |
| 1″ | 33.228 | 28.50 | 11.5 | 2.209 |
| 1¼” | 41.985 | 37.00 | 11.5 | 2.209 |
| 1½” | 48.054 | 43.50 | 11.5 | 2.209 |
| 2″ | 60.092 | 55.00 | 11.5 | 2.209 |
| 2½” | 72.699 | 65.50 | 8 | 3.175 |
| 3″ | 88.608 | 81.50 | 8 | 3.175 |
| 3½” | 101.316 | 94.30 | 8 | 3.175 |
| 4″ | 113.973 | 107.00 | 8 | 3.175 |
| 5″ | 141.300 | 134.384 | 8 | 3.175 |
| 6″ | 168.275 | 161.191 | 8 | 3.175 |
| 8″ | 219.075 | 211.673 | 8 | 3.175 |
| 10″ | 273.050 | 265.311 | 8 | 3.175 |
| 12″ | 323.850 | 315.793 | 8 | 3.175 |
90º ELBOW, 45º ELBOW, CROSS, TEE Forged Fittings Dimensions
| Nominal Pipe Size | Centre to End Elbows, Tee, Crosses A | Centre to End 45º Elbows C | Outside Diameter of Band H | Minimum Wall Thickness G | Lengths of Thread Min | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | B | L2 | |
| 1/8 | 13/16 | 13/16 | 31/32 | 11/16 | 11/16 | 3/4 | 7/8 | 7/8 | 1 | .125 | .125 | .250 | .25 | .2639 |
| 1/4 | 13/16 | 31/32 | 1-1/8 | 11/16 | 3/4 | 7/8 | 7/8 | 1 | 1-5/16 | .125 | .130 | .260 | .32 | .4018 |
| 3/8 | 3/32 | 1-1/8 | 1-5/16 | 3/4 | 7/8 | 1 | 1 | 1-5/16 | 1-1/2 | .125 | .138 | .275 | .36 | .4078 |
| 1/2 | 1-1/8 | 1-5/16 | 1-1/2 | 7/8 | 1 | 1-1/8 | 1-5/16 | 1-1/2 | 1-13/16 | .125 | .161 | .321 | .43 | .5337 |
| 3/4 | 1-5/16 | 1-1/2 | 1-3/4 | 1 | 1-1/8 | 1-5/16 | 1-1/2 | 1-13/16 | 2-3/16 | .123 | .168 | .336 | .50 | .5457 |
| 1 | 1-1/2 | 1-3/4 | 2 | 1-1/8 | 1-5/16 | 1-3/8 | 1-13/16 | 2-3/16 | 2-7/16 | .145 | .196 | .391 | .58 | .6828 |
| 1-1/4 | 1-3/4 | 2 | 2-3/8 | 1-15/16 | 1-3/8 | 1-11/16 | 2-3/16 | 2-7/16 | 2-31/32 | .153 | .208 | .417 | .67 | .7068 |
| 1-1/2 | 2 | 2-3/8 | 2-1/2 | 1-3/8 | 1-11/16 | 1-23/32 | 2-7/16 | 2-31/32 | 3-5/16 | .158 | .218 | .436 | .70 | .7235 |
| 2 | 2-3/8 | 2-1/2 | 3-3/4 | 1-11/16 | 1-23/32 | 2-1/16 | 2-31/32 | 3-5/16 | 4 | .168 | .238 | .476 | .75 | .7565 |
| 2-1/2 | 3 | 3-1/4 | 3-3/4 | 2-1/16 | 2-1/16 | 2-1/2 | 3-5/8 | 4 | 4 | .221 | .301 | .602 | .932 | 1.138 |
| 3 | 3-3/8 | 3-3/4 | 4-3/16 | 2-1/2 | 2-1/2 | 3-1/8 | 4-5/16 | 4-3/4 | 4-3/4 | .236 | .327 | .655 | 1.016 | 1.200 |
| 4 | 3-3/16 | 4-1/2 | 4-1/2 | 3-1/8 | 3-1/8 | 3-1/8 | 5-3/4 | 5 | 6 | .258 | .368 | .735 | 1.094 | 1.300 |
COUPLING,HALF COUPLING,CAP Forged Fittings Dimensions
| Nominal Pipe Size | End to End Couplings W | End to End Caps H | Outside Diameter D | End Wall Thickness G Min | Length of Thead Min | ||||
|---|---|---|---|---|---|---|---|---|---|
| 3000# & 6000# | 3000# | 6000# | 3000# | 6000# | 3000# | 6000# | B | L2 | |
| 1/8 | 1-1/4 | 3/4 | 5/8 | 7/8 | 3/16 | .25 | .2639 | ||
| 1/4 | 1-3/8 | 1 | 1-1/16 | 3/4 | 1 | 3/16 | 1/4 | .32 | .4018 |
| 3/8 | 1-1/2 | 1 | 1-1/16 | 7/8 | 1-1/4 | 3/16 | 1/4 | .36 | .4078 |
| 1/2 | 1-7/8 | 1-1/4 | 1-5/16 | 1-1/8 | 1-1/2 | 1/4 | 5/16 | .43 | .5337 |
| 3/4 | 2 | 1-7/16 | 1-1/2 | 1-3/8 | 1-3/4 | 1/4 | 5/16 | .50 | .5457 |
| 1 | 2-3/8 | 1-5/8 | 1-11/16 | 1-3/4 | 2-1/4 | 3/8 | 7/16 | .58 | .6828 |
| 1-1/4 | 2-5/8 | 1-3/4 | 1-13/16 | 2-1/4 | 2-1/2 | 3/8 | 7/16 | .67 | .7068 |
| 1-1/2 | 3-1/8 | 1-3/4 | 1-7/8 | 2-1/2 | 3 | 7/16 | 1/2 | .70 | .7235 |
| 2 | 3-3/8 | 1-7/8 | 2 | 3 | 3-5/8 | 1/2 | 5/8 | .75 | .7565 |
| 2-1/2 | 3-5/8 | 2-3/8 | 2-1/2 | 3-5/8 | 4-1/4 | 5/8 | 3/4 | .932 | 1.138 |
| 3 | 4-1/4 | 2-9/16 | 2-11/16 | 4-1/4 | 5 | 3/4 | 7/8 | 1.016 | 1.200 |
| 4 | 4-3/4 | 2-11/16 | 2-15/16 | 5-1/2 | 6-1/4 | 7/8 | 1-1/8 | 1.094 | 1.300 |
Super Duplex Steel Alloy S32750/S32760 High Pressure Threaded Forged Pipe Fittings
| Pressure Class | 2000lb/ 3000lb/ 6000lbs |
| Super Duplex S32750/S32760 Threaded Forged Fittings Products | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plug |
| Dimension Specifications | ASME 16.11, MSuper Duplex SP-79, 83, 95, 97, BS 3799 |
| Size | 1/8′-4′ (DN6~DN100) |
Super Duplex Steel Alloy S32750/S32760 High Pressure Socket Weld Forged Pipe Fittings
| Pressure Class | 3000LBS, S32750/S327600LBS, 9000LBS |
| Super Duplex S32750/S32760 Socket Weld Forged Fittings Products | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plug |
| Dimension Specifications | ASME 16.11, MSuper Duplex SP-79, 83, 95, 97, BS 3799 |
| Size | 1/8’~4′ (DN6~DN100) |
Manufacturing Standards of ASTM/ASME A182/SA182 Super Duplex Steel S32750/S32760 Forged Threaded & Socket Weld Fittings
| ASTM A182 / SA182 | Forged Fittings and valves and parts for high temperature service. Standard Specification for Wrought Austenitic Super Duplex Steel Forged Fittings |
| BS21 | Threading. |
| BS3799 | Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry |
| ANSI B16.11 | Forged steel fittings socket-welding and threaded. Socket Welding and Threaded Forged Fittings |
| ANSI/ASME B1.20.1 | Pipe threads, general purpose (inch). |
| ISO 4144 | Super Duplex Steel fittings threaded to ISO 7-1. |
| MSuper Duplex SP-95 | Swage(d) Nipples and Bull Plugs |
Super Duplex Steel S32750/S32760 Forged Threaded & Socket Weld Fittings Standard
| American Steel Forged Fittings Standard | |
| Standard Code | Standard Name |
| ANSI ASME SA-182 | Forged Fittings |
| ANSI ASME B16.11 | Socket-Welding and Threaded forged fittings |
| MSuper Duplex SP-79 | Socket-Welding reducing Inserts |
| MSuper Duplex SP-83 | Class 3000 steel Socket Weld and Threaded unions |
| MSuper Duplex SP-95 | Swaged Nipples and Round Plugs |
| MSuper Duplex SP-97 | SW, TH and BW ends for integrally Reinforced Forged Branch Olets/Outlet |
Super Duplex Steel S32750/S32760 Types of Threaded & Socket Weld Fittings We Supply
| WNR. 1.4410 Forged Pipe Coupling | SAF 2507 Super Duplex Steel Full Coupling |
| S32750 Super Duplex 3000 LB Threaded Fittings | Super Duplex Steel S32760 Forged Socket weld Fittings |
| ASTM A182 S32760 NPT Threaded Fittings | UNS S32750 NPT Threaded Fittings |
| Super Duplex Steel S32750 Forged Threaded Bushing | S32760 Super Duplex Steel Threaded Pipe Nipples |
| Super Duplex S32750 Forged Threaded Swage Nipple | SDSS S32760 Threaded Hex Head Bushing |