Titanium Gr 2 Sheets & Plates Manufacturer & Supplier

  • Home
  • Titanium Gr 2 Sheets & Plates Manufacturer & Supplier

Titanium Gr 2 Sheets & Plates

India’s Leading Titanium Gr 2 2B Finish Plates, DIN 3.7035 Chequered Plate, ASTM B265 Titanium Gr 2 Cold Rolled Sheets, UNS R50400 Shim Sheets, Titanium Gr 2 Hot Rolled Plates Manufacturer & Supplier in India.

Suppliers and Manufacturer of Titanium Grade 2 Sheets / Titanium Grade 2 Plates, which has a few first-rate functions to provide along with Tough construction, Lightweight, Dimensionally precise, etc. Further, our specialists take a look at the excellent of the procured Sheets on numerous parameters to make certain their premier excellent. we provide Titanium UNS R50400 Sheets in a number specs at cost – powerful rates. It is factory-made at our excessive-tech infrastructure capacity using modern-day machines and modern-day technology. The titanium sheets and plates for their customers globally and provide them with the various different specifications of titanium grade 2 sheets and plates. Titanium Alloy Grade 2 Sheet and Plate is made with various types of chemical compositions such as carbon, titanium, hydrogen, aluminum, vanadium, nitrogen, and iron. Titanium Alloy Grade 2 Sheet and Plate is made with various types of chemical compositions such as carbon, titanium, hydrogen, aluminum, vanadium, nitrogen, and iron.

We as a client-focused industry is providing the very good quality of commendable ranges of Titanium Gr 2 Sheets & Plates. The dimensions in which this Titanium Gr 2 Sheets & Plates are available are AISI, EN, ASME, DIN, ASTM, JIS, and BS. The dimensions in which this Titanium Gr 2 Sheets & Plates are available are AISI, EN, ASME, DIN, ASTM, JIS, and BS. Titanium all grade material including. Titanium all grade material including Ti Gr2 or UNS R50400 is the commercially pure alloy that is having titanium of 99%. This plate is even made with the help of both physical and mechanical properties such as tensile strength, yield strength, elongation, melting point, thermal conductivity, electrical conductivity, modulus of the expansion and so on as well. The company uses the ideal raw material for the manufacturing of the sheets and plates. Providing better power than each austenitic and 22% Cr, Coils is ideal to loads of programs in industries along with Chemical Processing, Oil & Gas, and Marine environments.

Largest Manufacturer & Supplier of Ti Grade 2 Plain Sheet, Titanium Gr 2 Plates Cut to Size, Titanium Gr.2 #4 Finish Plates, Titanium Gr 2 Decorative Sheets, Titanium Grade 2 Polished Sheets Manufacturer in Mumbai, India.

ASTM B265 Titanium Gr 2 Sheets & Plates Equivalent Grade

STANDARD WERKSTOFF NR. UNS
Titanium Gr 2 3.7035 R50400

ASME SB265 Titanium Gr 2 Sheets & Plates Chemical Composition

Grade Ti C Fe H N O Al V
Titanium Gr 2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max – –

Titanium Gr 2 Sheets & Plates Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Ti Gr 2 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Titanium Gr 2 Sheets & Plates Specification

Trade name Titanium Gr 2 Sheets & Plates
Titanium Gr 2 Sheets & Plates Standard ASTM B265/ ASME SB265
Ti Gr 2 Sheets & Plates Dimensions JIS, AISI, ASTM, GB, DIN, EN, etc
Titanium Gr 2 Sheets & Plates Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
ASTM B265 Titanium Gr 2 Alloy Sheets & Plates Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Titanium Gr 2 Sheets & Plates Thickness 0.3 mm to 120 mm
Titanium Gr 2 Sheets & Plates Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Titanium Gr 2 Sheets & Plates Surface Finishing Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.
Payment Terms Paypal, Western Union, T/T (Telegraphic Transfer or Wire Transfer), L/C or Trade Assurance 30% deposit & balance before shipping
Free Sample Yes if we have in stock
Value Added Services Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing
SB 265 Titanium Gr 2 Sheets & Plates Origin & Mills Japanese, Indian, USA, Korean, European, Russian, Ukraine (Strictly No China)
Inspection and Test Reports EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports
Marking
  • Specification
  • Grade
  • Nominal Sheet/Plate Sizes
  • Sheet Schedule or Thickness
  • Manufacturing Method (HR / CR)
  • Heat Number
  • Manufacturer’s Name or Custom Logo – on request
  • Marked Sheet/Plate Sample: ASTM B265 Sheet/Plate & Coils HEAT NO. XXXX
Outside Finish Finish as per customer Requirements
Delivery Condition Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Packing of Titanium Gr 2 Sheets & Plates Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials Sizes and Specifications other than above can be on request
Titanium Gr 2 UNS R50400 Sheets & Plates Application & uses
  • Petroleum
  • Chemical plant
  • Power sector
  • Gas Industry
  • Hardware tools
  • Metallurgy
  • Machinery
  • Construction
  • Shipbuilding

Titanium Gr 2 Sheets & Plates Finishes

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

Titanium Gr 2 Sheets & Plates Thickness Chart

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

ASTM B265 Titanium Gr 2 Polished Plate Thickness

Thickness Grades
.016 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.020 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.025 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.032 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.040 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.050 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.063 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.071 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.080 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.090 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.100 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.125 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN

Titanium Gr 2 UNS R50400 Sheet & Plates Weight Chart

Thickness (inches) Density Plate Weight per Unit Area
3/16 0.315 lbs/in³8.72 g/cm³ 0.06000 lbs/in²42.184176 kg/m²
1/4 0.315 lbs/in³8.72 g/cm³ 0.08 lbs/in²56.245568 kg/m²
3/8 0.315 lbs/in³8.72 g/cm³ 0.121 lbs/in²85.0714216 kg/m²
1/2 0.315 lbs/in³8.72 g/cm³ 0.161 lbs/in²113.1942056 kg/m²
5/8 0.315 lbs/in³8.72 g/cm³ 0.196 lbs/in²137.8016416 kg/m²
3/4 0.315 lbs/in³8.72 g/cm³ 0.235 lbs/in²165.221356 kg/m²
7/8 0.315 lbs/in³8.72 g/cm³ 0.274 lbs/in²192.6410704 kg/m²
1 0.315 lbs/in³8.72 g/cm³ 0.313 lbs/in²220.0607848 kg/m²
1 1/4 0.315 lbs/in³8.72 g/cm³ 0.391 lbs/in²274.9002136 kg/m²
1 1/2 0.315 lbs/in³8.72 g/cm³ 0.47 lbs/in²330.442712 kg/m²
1 3/4 0.315 lbs/in³8.72 g/cm³ 0.549 lbs/in²385.9852104 kg/m²
2 0.315 lbs/in³8.72 g/cm³ 0.627 lbs/in²440.8246392 kg/m²
2 1/4 0.315 lbs/in³8.72 g/cm³ 0.705 lbs/in²495.664068 kg/m²
2 1/2 0.315 lbs/in³8.72 g/cm³ 0.784 lbs/in²551.2065664 kg/m²
2 3/4 0.315 lbs/in³8.72 g/cm³ 0.862 lbs/in²606.0459952 kg/m²
3 0.315 lbs/in³8.72 g/cm³ 0.941 lbs/in²661.5884936 kg/m²

Titanium Gr 2 Sheets & Plates Imperial Dimensions

Plate Surface finish Width (max inches) Gauge (inches)
2B – Cold rolled, heat treated, pickled, skin passed Plate 72* 10–24
2D – Cold rolled, heat treated, pickled plate 60 12–24
BA Mexinox only 48 18–28
Polished plate (not brushed) 60 11–24
Temper rolled plate Mexinox only 48 13–29

Titanium Gr 2 Sheets & Plates Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524
  • Titanium Grade 2 CR Sheets
  • Ti Gr 2 Sheets
  • UNS R50400 Mill Finish Sheet
  • WNR. 3.7035 Sheets
  • Titanium Gr. 2 Hot Rolled Sheets
  • INOX 3.7035 Perforated Sheet
  • Titanium Gr.2 Perforated Sheet
  • ASTM B265 Titanium Gr 2 2B Finish Perforated Sheet
  • ASME SB265 Titanium Grade 2 Perforated Sheet
  • UNS R50400 Hot Rolled Perforated Sheet
  • Titanium Gr 2 CR Plates
  • DIN 3.7035 Plates Supplier
  • Titanium Gr. 2 Hot Rolled Plates
  • UNS R50400 Mill Finish Plates
  • Titanium Grade 2 Plates Suplier
  • Titanium Gr.2 Hot Rolled Plates
  • DIN 3.7035 Cold Rolled Plates Supplier
  • UNS R50400 Mill Finish HRPlates
  • ASTM B265 Titanium Grade 2 CR Plates
  • ASME SB265 Outokumpu HR Plate Supplier
  • Titanium Gr 2 CR Shim Sheets
  • INOX 3.7035 Shim Sheets
  • Ti Gr 2 Shim Sheets
  • UNS R50400 Mill Finish Shim Sheets
  • ASTM B265 Titanium Gr 2 Shim Sheets

ASME SB265 Ti Gr 2 Sheets & Plates Thickness Tolerance Chart

Tolerance over and under nominal thickness t (mm)
Width w (mm) 2.5<t <4.5 4.5<t <6.0 6.0<t <8.0 8.0<t <10.0 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0  20.0<t <25.0 25.0<t <30.0 30<t <40.0
w < 1201 0.20 0.23 0.30 0.32 0.35 0.80 0.80 0.80 1.0 1.4
1201< w <1500 0.20 0.25 0.30 0.35 0.38 0.80 0.80 0.90 1.0 1.4
1500< w <1800 0.20 0.28 0.32 0.38 0.40 0.80 0.80 0.90 1.1 1.5
1800< w <2100 0.20 0.30 0.36 0.40 0.45 0.80      0.80      0.90      1.1         1.5        
2100< w <2400 0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
2400< w <2700 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7
2700< w <3000 0.80 0.90 1.0 1.0 1.0 1.1 1.3 1.4 1.8
Tolerances on length of Sheets & Plates
Tolerance(mm)
Nominal length (mm) Minus Plus
L < 2,000 0 10
2,000 < L < 8,000 0 0.005 times L
L > 8,000 0 40