ASTM BF288 Tungsten Round Bars & Rods, Sheets
India’s Leading Manufacturer & Supplier of Tungsten HE 397 Wire Spool, Tungsten HA 190 Hex Bar, Tungsten Alloy HE 395 Bars, Tungsten HE 3925 Rectangular Bar, ASME SF288 Alloy HA 1925 Welding Wire Supplier in Mumbai, India.
Kanak Steel & Engg Co. is an approved manufacturer and stockist of PURE TUNGSTEN / SHEET / ROD / WIRE, which used for oven linings, kilns, lead pots, boiler baffles, and so on.
Molybdenum in Sheets will increase their resistance to many chemical corrodes and marine environments. Meanwhile, Pure Tungsten Sheets has extremely good rupture and tensile energy at excessive temperatures. It profits corrosion resistance from use of a nonmagnetic strong answer of ferric carbide or carbon in iron within the production process. Molybdenum addition in Rods offers specifically better resistance to pitting and crevice corrosion in chloride environments. It can face up to a whole lot extra time and abuse earlier than displaying symptoms and symptoms of wear. It is appropriate for packages from polluted marine environments to regions with sub-0 temperatures.
Properties are comparable besides that Pure Tungsten Rods is fairly more potent at accelerated temperatures. It is with no trouble brake or roll formed, welded, soldered and reduce with the aid of using each thermal and mechanical methods. Heat remedy of Sheets from 1050 Degree C to 1150 Degree C guarantees that each one carbides are in answer. It has excellent resistance to thermal fatigue and intermittent heating at excessive temperatures. It isn’t counselled for the extreme thermal surprise of repeated liquid quenching.
It is regularly used at cryogenic temperatures, with extremely good durability to -450 Degree F, and coffee magnetic permeability. Pure Tungsten Wires has a whole lot higher creep energy at accelerated temperatures than different austenitic metal grades. Because of its excessive chromium and mild nickel content material, it’s miles proof against sulfidation. It is used at temperatures as much as 1150 Degree C in non-stop service, and 1035 Degree C in intermittent service. It has advanced resistance to oxidation and the retention of a bigger fraction of room temperature energy than the not unusual place austenitic alloys. The key houses of Rods are its excessive chromium and medium nickel content material making its resistance to oxidation. It has extremely good forming and welding characteristics. It is largely non-magnetic, however turns into barely magnetic whilst worked.
Largest Manufacturer & Supplier of Tungsten HE 390 Threaded Rods, Tungsten Alloy HE 390 Carbide Rods, Tungsten HE 190 HR Sheets, ASTM F288 Tungsten HA 1925 Sheets, Tungsten HE 390 Bars in Mumbai, India.
Tungsten Round Bar Equivalent Grades
Element | Grade |
Tungsten | HA 190 / HA 1925 / HA 195 / HE 390 / HE 3925 / HE 395 / HE 397 |
Tungsten Round Bar & Rods, Wires Chemical Composition
W (>%) | Chemical Content (< %) | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
99.999 | Fe | Ca | Be | Sn | Al | Ni | Zn | Sb | Pt | K | Ta | Na |
0.0001 | 0.00005 | 0.000005 | 0.000005 | 0.00005 | 0.00001 | 0.00005 | 0.00005 | 0.00003 | 0.000005 | 0.0001 | 0.00005 | |
Cr | Pb | As | Mg | Ti | Bi | Mo | Cd | Cu | Ba | Co | Mn | |
0.000005 | 0.00001 | 0.00005 | 0.00005 | 0.000005 | 0.00001 | 0.00001 | 0.000005 | 0.000007 | 0.00001 | 0.000005 | 0.000005 | |
99.99 | Fe | Ca | Be | Sn | Al | Ni | Zn | Sb | Pt | K | O | Na |
0.0001 | 0.00045 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0005 | 0.0040 | 0.0009 | |
Cr | Pb | As | Mg | Ti | Bi | Mo | Cd | Cu | Ba | Co | Mn | |
0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0002 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | |
99.95 | Fe | Ca | P | Sn | Al | Ni | N | Sb | Si | O | Pb | As |
0.005 | 0.003 | 0.001 | 0.0001 | 0.002 | 0.003 | 0.003 | 0.001 | 0.003 | 0.003 | 0.0001 | 0.002 | |
Mg | C | Bi | Mo | |||||||||
0.002 | 0.005 | 0.0001 | 0.001 |
Tungsten Round Bars Mechanical Properties
Tensile Strength | KSI (MPa)-RT | 250 (1725) |
KSI (MPa)-500°C | 150 (1035) | |
KSI (MPa)-1000°C | 75 (515) | |
Elongation | % in 1.0″ | — |
Hardness | DPH | 300 |
Modulus of Elasticity | KSI | 58000 |
GPa | 400 |
Tungsten Round Bars Typical Physical Properties
Density | lb/in3 | 0.70 |
gm/cm3 | 19.27 | |
Melting Point | °F | 6170 |
°C | 3410 | |
Thermal Conductivity | Cal/cm2/cm°C/sec | 0.48 |
Specific Heat | Cal/gm/°C | 0.032 |
Coefficient of Linear Thermal Expansion | 10-6 (°F) -1 | 2.40 |
10-6 (°C) -1 | 4.30 | |
Electrical Resistivity | Microhm-cm | 5.50 |
Specification of ASTM F288 Tungsten Round Bar & Rods, Sheets, Shims
Standard | ASTM ASTM F288 / ASME SF288 |
---|---|
Grades | HA 190 / HA 1925 / HA 195 / HE 390 / HE 3925 / HE 395 / HE 397 |
Tungsten Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Tungsten Round Bar size | Diameter: 3-~800mm |
Tungsten Hex Bar size | 2-100mm A/F |
Tungsten Flat Bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Tungsten Square Bar size | 4 to 100mm |
Tungsten Angle Bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Tungsten Rectangular Bars Section | 3.0 to 12.0mm thickness |
Tungsten Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Tungsten Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Tungsten Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Tungsten Rectangular Size | 33 x 30mm to 295 x 1066mm |
Tungsten Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
ASTM F288 Tungsten Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Tungsten T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Rolled Tungsten Flat Bars Condition | Hardened & tempered, annealed |
ASTM F288 Tungsten Cold Rolled Bar Technique | Tungsten Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
ASME SF288 Tungsten Rod Processing | Bar cutting to 650mm |
Tungsten Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our Tungsten Round Bar conforms to NACE MR0175/ISO 15156 |
Tungsten Bar Specifications
Thickness (mm) | Width (mm) | Length (mm) |
---|---|---|
2~15 | <500 | <500 |
1~2 | <500 | <1000 |
0.5~1 | <500 | <500 |
0.3~0.5 | <500 | <500 |
0.2~0.3 | <500 | <500 |
Tungsten Round Bar Size & Dimensions
ASTM F288 Tungsten Round bar Size & Dimensions | |||||||
---|---|---|---|---|---|---|---|
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.625 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
ASME SF288 Tungsten Square Bar Sizes And Schedules
Size in (Milimeter) | Weight Chart per M (Kilogram) | Size in (Milimeter) | Weight Chart per M (Kilogram) |
---|---|---|---|
12 x 12 | 1.14 | 30×30 | 7.11 |
16 x 16 | 2.02 | 40 x 40 | 12.60 |
20 x 20 | 3.16 | 50 x 50 | 19.80 |
25 x 25 | 4.94 | – | – |
ASTM F288 Tungsten Flat Bar Size
Sizes in mm | Size (inch) | Thickness (mm) | Thickness (in Inches) |
---|---|---|---|
22 | 7/8 | 17 & 18 | 2/3 – 5/7 |
25 | 1 | 5 to 20 | 3/16 – 4/5 |
30 | 1-3/16 | 5 to 20 | 3/16 – 4/5 |
32 | 1-1/4 | 6 to 20 | 1/4 – 4/5 |
35 | 1-3/8 | 5 to 20 | 3/16 – 3/16 |
40 | 1-4/7 | 5 to 25 | 3/16 – 1 |
45 | 1-7/9 | 5 to 25 | 3/16 – 1 |
47 | 1-6/7 | 17,25 & 32 | 2/3, 1 & 1-1/4 |
50 | 2 | 5 to 32 | 3/16 – 1-1/4 |
55 | 2-1/16 | 5 to 25 | 3/16 – 1 |
57 | 2-1/4 | 32 | 1-1/4 |
60 | 2-3/8 | 5 to 35 | 3/16 – 1-3/8 |
63 | 2-1/2 | 10 to 30 | 3/8 – 1-3/16 |
65 | 2-5/9 | 10 to 30 & 35 | 3/8 – 1-3/16, & 1-3/8 |
70 | 2-3/4 | 6 to 25 & 40 | 1/4 – 1, & 1-4/7 |
75 | 3 | 8 to 25 | 5/16 – 1 |
80 | 3-1/8 | 8 to 20 | 5/16 – 4/5 |
90 | 3-1/2 | 8 to 20 | 5/16- 4/5 |
100 | 4 | 8, 10, 12 | 5/16, 3/8, 1/2 |
Tungsten Hollow Bar Sizes And Schedules
Size | Chucked true to OD | Chucked true to ID | |||||||
---|---|---|---|---|---|---|---|---|---|
OD, mm |
ID, mm |
Max. OD, mm |
Min. ID, mm |
Max. OD, in. |
Min. ID, in. |
Max. OD, mm |
Min. ID, mm |
Max. OD, in. |
Min. ID, in. |
32 | 20 | 31 | 21.9 | 1.220 | 0.862 | 30 | 21 | 1.185 | 0.827 |
32 | 16 | 31 | 18 | 1.220 | 0.709 | 30 | 17 | 1.181 | 0.669 |
36 | 25 | 35 | 26.9 | 1.378 | 1.059 | 34.1 | 26 | 1.343 | 1.024 |
36 | 20 | 35 | 22 | 1.378 | 0.866 | 34 | 21 | 1.339 | 0.827 |
36 | 16 | 35 | 18.1 | 1.378 | 0.713 | 33.9 | 17 | 1.335 | 0.669 |
40 | 28 | 39 | 29.9 | 1.535 | 1.177 | 38.1 | 29 | 1.500 | 1.142 |
40 | 25 | 39 | 27 | 1.535 | 1.063 | 38 | 26 | 1.496 | 1.024 |
40 | 20 | 39 | 22.1 | 1.535 | 0.870 | 37.9 | 21 | 1.492 | 0.827 |
45 | 32 | 44 | 33.9 | 1.732 | 1.335 | 43.1 | 33 | 1.697 | 1.299 |
45 | 28 | 44 | 30 | 1.732 | 1.181 | 43 | 29 | 1.693 | 1.142 |
45 | 20 | 44 | 22.2 | 1.732 | 0.874 | 42.8 | 21 | 1.685 | 0.827 |
50 | 36 | 49 | 38 | 1.929 | 1.496 | 48 | 37 | 1.890 | 1.457 |
50 | 32 | 49 | 34.1 | 1.929 | 1.343 | 47.9 | 33 | 1.886 | 1.299 |
50 | 25 | 49 | 27.2 | 1.929 | 1.071 | 47.8 | 26 | 1.882 | 1.024 |
56 | 40 | 55 | 42 | 2.165 | 1.654 | 54 | 41 | 2.126 | 1.614 |
56 | 36 | 55 | 38.1 | 2.165 | 1.500 | 53.9 | 37 | 2.122 | 1.457 |
56 | 28 | 55 | 30.3 | 2.165 | 1.193 | 53.7 | 29 | 2.114 | 1.142 |
63 | 50 | 62 | 51.9 | 2.441 | 2.043 | 61.1 | 51 | 2.406 | 2.008 |
63 | 45 | 62 | 47 | 2.441 | 1.850 | 61 | 46 | 2.402 | 1.811 |
63 | 40 | 62 | 42.2 | 2.441 | 1.661 | 60.8 | 41 | 2.394 | 1.614 |
63 | 36 | 62 | 38.3 | 2.441 | 1.508 | 60.7 | 37 | 2.390 | 1.457 |
63 | 32 | 62 | 34.4 | 2.441 | 1.354 | 60.6 | 33 | 2.386 | 1.299 |
71 | 56 | 69.9 | 58 | 2.752 | 2.283 | 68.9 | 57 | 2.713 | 2.244 |
71 | 45 | 69.9 | 47.3 | 2.752 | 1.862 | 68.6 | 46 | 2.701 | 1.811 |
71 | 40 | 69.9 | 42.4 | 2.752 | 1.669 | 68.5 | 41 | 2.697 | 1.614 |
71 | 36 | 69.9 | 38.5 | 2.752 | 1.516 | 68.4 | 37 | 2.693 | 1.457 |
75 | 60 | 73.8 | 62 | 2.906 | 2.441 | 72.8 | 61 | 2.866 | 2.402 |
75 | 50 | 73.8 | 52.2 | 2.906 | 2.055 | 72.6 | 51 | 2.858 | 2.008 |
75 | 40 | 73.8 | 42.5 | 2.906 | 1.673 | 72.3 | 41 | 2.846 | 1.614 |
80 | 63 | 78.8 | 65 | 3.102 | 2.559 | 77.8 | 64 | 3.063 | 2.520 |
80 | 50 | 78.8 | 52.4 | 3.102 | 2.053 | 77.4 | 51 | 3.047 | 2.008 |
80 | 45 | 78.8 | 47.5 | 3.102 | 1.870 | 77.3 | 46 | 3.043 | 1.811 |
80 | 40 | 78.8 | 42.6 | 3.102 | 1.677 | 77.2 | 41 | 3.039 | 1.614 |
85 | 67 | 83.7 | 69.1 | 3.295 | 2.720 | 82.6 | 68 | 3.252 | 2.677 |
85 | 55 | 83.7 | 57.4 | 3.295 | 2.260 | 82.3 | 56.0 | 3.240 | 2.205 |
85 | 45 | 83.7 | 47.6 | 3.295 | 1.874 | 82.1 | 46.0 | 3.232 | 1.811 |
90 | 71 | 88.6 | 73.1 | 3.488 | 2.878 | 87.6 | 72.1 | 3.449 | 2.839 |
90 | 63 | 88.6 | 65.3 | 3.488 | 2.571 | 87.3 | 64.0 | 3.437 | 2.520 |
90 | 56 | 88.6 | 58.5 | 3.488 | 2.303 | 87.1 | 57.0 | 3.429 | 2.244 |
90 | 50 | 88.6 | 52.6 | 3.488 | 2.071 | 87.0 | 51.0 | 3.425 | 2.008 |
95 | 75 | 93.5 | 77.3 | 3.681 | 3.041 | 92.4 | 76.2 | 3.641 | 2.997 |
95 | 67 | 93.5 | 69.3 | 3.681 | 2.728 | 92.2 | 68.0 | 3.630 | 2.677 |
95 | 50 | 93.5 | 52.7 | 3.681 | 2.075 | 91.8 | 51.0 | 3.614 | 2.008 |
100 | 80 | 98.5 | 82.3 | 3.878 | 3.240 | 97.4 | 81.2 | 3.835 | 3.197 |
100 | 71 | 98.5 | 73.4 | 3.878 | 2.890 | 97.2 | 72.1 | 3.827 | 2.839 |
100 | 63 | 98.5 | 65.5 | 3.878 | 2.579 | 97.0 | 64.0 | 3.819 | 2.520 |
100 | 56 | 98.5 | 58.7 | 3.878 | 2.311 | 96.8 | 57.0 | 3.811 | 2.244 |
106 | 80 | 104.4 | 82.5 | 4.110 | 3.248 | 103.1 | 81.2 | 4.059 | 3.197 |
106 | 71 | 104.4 | 73.5 | 4.110 | 2.894 | 103.0 | 72.1 | 4.055 | 2.839 |
106 | 63 | 104.4 | 65.7 | 4.110 | 2.587 | 102.7 | 64.0 | 4.043 | 2.520 |
106 | 56 | 104.4 | 58.9 | 4.110 | 2.319 | 102.5 | 57.0 | 4.035 | 2.244 |
112 | 90 | 110.3 | 92.5 | 4.343 | 3.642 | 109.2 | 91.4 | 4.299 | 3.598 |
112 | 80 | 110.3 | 82.6 | 4.343 | 3.252 | 108.9 | 81.2 | 4.287 | 3.197 |
112 | 71 | 110.3 | 73.7 | 4.343 | 2.902 | 108.7 | 72.1 | 4.280 | 2.839 |
112 | 63 | 110.3 | 65.8 | 4.343 | 2.591 | 108.5 | 64.0 | 4.272 | 2.520 |
118 | 90 | 116.2 | 92.7 | 4.575 | 3.650 | 114.9 | 91.4 | 4.524 | 3.598 |
118 | 80 | 116.2 | 82.8 | 4.575 | 3.260 | 114.6 | 81.2 | 4.512 | 3.197 |
118 | 71 | 116.2 | 73.8 | 4.575 | 2.906 | 114.5 | 72.1 | 4.508 | 2.839 |
118 | 63 | 116.2 | 66.0 | 4.575 | 2.598 | 114.2 | 64.0 | 4.496 | 2.520 |
125 | 100 | 123.1 | 102.7 | 4.846 | 4.043 | 121.9 | 101.5 | 4.799 | 3.996 |
125 | 90 | 123.1 | 92.8 | 4.846 | 3.654 | 121.7 | 91.4 | 4.791 | 3.598 |
125 | 80 | 123.1 | 82.9 | 4.846 | 3.264 | 121.4 | 81.2 | 4.780 | 3.197 |
125 | 71 | 123.1 | 74.0 | 4.846 | 2.913 | 121.3 | 72.1 | 4.772 | 2.839 |
132 | 106 | 130.0 | 108.8 | 5.118 | 4.283 | 128.8 | 107.6 | 5.071 | 4.236 |
132 | 90 | 130.0 | 93.0 | 5.118 | 3.661 | 128.4 | 91.4 | 5.055 | 3.598 |
132 | 80 | 130.0 | 83.1 | 5.118 | 3.272 | 128.1 | 81.2 | 5.043 | 3.197 |
132 | 71 | 130.0 | 74.2 | 5.118 | 2.921 | 121.2 | 72.1 | 5.035 | 2.839 |
140 | 112 | 137.9 | 115 | 5.429 | 4.528 | 136.6 | 113.7 | 5.378 | 4.476 |
140 | 100 | 137.9 | 103.1 | 5.429 | 4.059 | 136.3 | 101.5 | 5.366 | 3.996 |
140 | 90 | 137.9 | 93.2 | 5.429 | 3.669 | 136.1 | 91.4 | 5.358 | 3.598 |
140 | 80 | 137.9 | 83.3 | 5.429 | 3.280 | 135.8 | 81.2 | 5.346 | 3.197 |
150 | 125 | 147.7 | 128.1 | 5.815 | 5.043 | 146.5 | 126.9 | 5.768 | 4.996 |
150 | 106 | 147.7 | 109.3 | 5.815 | 4.303 | 146 | 107.6 | 5.748 | 4.236 |
150 | 95 | 147.7 | 98.4 | 5.815 | 3.874 | 145.7 | 96.4 | 5.736 | 3.795 |
150 | 80 | 147.7 | 83.6 | 5.815 | 3.291 | 145.3 | 81.2 | 5.720 | 3.197 |
160 | 132 | 157.6 | 135.3 | 6.205 | 5.327 | 156.3 | 134 | 6.154 | 5.276 |
160 | 122 | 157.6 | 125.4 | 6.205 | 4.937 | 156 | 123.8 | 6.142 | 4.874 |
Tungsten Hex Bar Tolerance Table
ASTM F288 Tungsten Round Bar & Hex, Flat Tolerance (BS 970-3) | ||
Shape / Section | Size, Diameter or Width across Flats | Permitted Variation |
mm | mm | |
Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to – 0.070 + 0 to – 0.085 + 0 to – 0.100 + 0 to – 0.120 + 0 to – 0.140 |
Flat (Thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to – 0.110 + 0 to – 0.130 + 0 to – 0.250 + 0 to – 0.350 |
Flat (Width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to – 0.110 + 0 to – 0.130 + 0 to – 0.160 + 0 to – 0.190 + 0 to – 0.220 + 0 to – 0.350 + 0 to – 1.00 + 1.00 to – 1.00 |
Square and Hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to – 0.090 + 0 to – 0.110 + 0 to – 0.130 + 0 to – 0.160 + 0 to – 0.250 |
Tolerances of Turned Tungsten Bars / Rod (BS 970-3) | |
---|---|
Size, diameter | Permitted variation |
mm | mm |
≧ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 120 > 120 ≦ 180 > 180 ≦ 250 > 250 ≦ 315 > 315 ≦ 400 > 400 |
+ 0 to – 0.070 + 0 to – 0.085 + 0 to – 0.100 + 0 to – 0.120 + 0 to – 0.140 + 0 to – 0.160 + 0 to – 0.185 + 0 to – 0.210 + 0 to – 0.230 + 0 to – 0.250 |
Tungsten Round Bar Surface Finishes
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
Tungsten Round Bar / Wire Uses
Defence | Making arms and ammunition |
Military | To produce Cold headed components |
Automobile Industries to make nuts, bolts, shafts | Used in Agricultural sector |
Manufacturing gears, bearings, and hinges | For Oil and Gas |
Oil and Gas industry | Heavy engineering Industries |
Tungsten Alloy Round Bar Weight Chart
ASME SF288 Tungsten Round Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3″ | 10.900 | 35.762 |
1/8″ | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4″ | 12.800 | 41.996 |
5/32″ | 0.029 | 0.095 | 7/8″ | 0.926 | 3.038 | 3-1/2″ | 14.850 | 48.772 |
4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4″ | 17.001 | 55.780 |
3/16″ | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4″ | 19.306 | 63.340 |
5mm | 0.047 | 0.154 | 1″ | 1.210 | 3.970 | 4-1/4″ | 21.908 | 72.249 |
7/32″ | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2″ | 24.4487 | 80.340 |
6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4″ | 27.366 | 90.249 |
1/4″ | 0.076 | 0.249 | 1-1/8″ | 1.534 | 5.033 | 5″ | 30.461 | 99.940 |
7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2″ | 36.690 | 121.000 |
5/16″ | 0.118 | 0.387 | 1-1/4″ | 1.924 | 6.349 | 6″ | 43.860 | 143.900 |
8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2″ | 51.093 | 167.630 |
9mm | 0.152 | 0.498 | 1-3/8″ | 2.303 | 7.550 | 7″ | 59.432 | 196.000 |
3/8″ | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2″ | 68.226 | 225.000 |
10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8″ | 77.586 | 254.55 |
11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10″ | 121.048 | 397.140 |
7/16″ | 0.232 | 0.761 | 1-1/2″ | 2.715 | 8.951 | |||
12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
1/2″ | 0.303 | 0.994 | 1-5/8″ | 3.200 | 10.449 | |||
13mm | 0.318 | 1.043 | 1-3/4″ | 3.712 | 12.179 | |||
14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
9/16″ | 0.383 | 1.256 | 1-7/8″ | 4.260 | 13.977 | |||
15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
5/8″ | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
16mm | 0.481 | 1.578 | 2″ | 4.848 | 15.906 | |||
17mm | 0.543 | 1.791 | 2-1/8″ | 5.475 | 17.963 | |||
11/16″ | 0.573 | 1.880 | 2-1/4″ | 6.135 | 20.128 | |||
18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
3/4″ | 0.682 | 2.237 | 2-3/8″ | 6.838 | 22.435 | |||
2-1/2″ | 7.576 | 24.856 | ||||||
2-5/8″ | 8.354 | 27.409 | ||||||
2-3/4″ | 9.169 | 30.083 |
- Tungsten Round Bars
- Tungsten Grade HA 190 Round Bars
- Tungsten Grade HA 195 Round Bars
- Tungsten Grade HE 390 Round Bars
- Tungsten Grade HE 395 Round Bars
- Tungsten Grade HA 190 Flat Bars
- Tungsten Grade HA 195 Flat Bars
- Tungsten Grade HE 390 Flat Bars
- Tungsten Grade HE 395 Flat Bars
- Tungsten Grade HE 397 Flat Bars
- Tungsten Cold Drawn Bars
- Tungsten Grade HA 190 Cold Drawn Bars
- ASTM F288 Tungsten Cold Drawn Bars
- ASME SF288 Tungsten Cold Drawn Bars
- Pure Tungsten Cold Drawn Bars
- Tungsten Grade HA 190 Square Bars
- Tungsten Grade HA 1925 Square Bars
- Tungsten Grade HA 195 Square Bars
- Tungsten Grade HE 390 Square Bars
- Tungsten Grade HE 3925 Square Bars
- Tungsten Grade HA 1925 Rectangular Bars
- Tungsten Grade HE 390 Rectangular Bars
- Tungsten Grade HE 3925 Rectangular Bars
- Tungsten Grade HE 395 Rectangular Bars
- Tungsten Grade HE 397 Rectangular Bars
- Tungsten Grade HA 190 Hot Rolled Bars
- Tungsten Grade HA 195 Hot Rolled Bars
- Tungsten Grade HE 390 Hot Rolled Bars
- Tungsten Grade HE 395 Hot Rolled Bars
- Tungsten Grade HE 397 Hot Rolled Bars
- Tungsten Grade HA 190 Hexagon Bars
- Tungsten Grade HA 1925 Hexagon Bars
- ASTM F288 Tungsten Hexagon Bars
- ASME SF288 Tungsten Hexagon Bars
- Pure Tungsten Hexagon Bars
- Tungsten Grade HA 1925 Threaded Bars
- Tungsten Grade HE 390 Threaded Bars
- Tungsten Grade HE 3925 Threaded Bars
- Tungsten Grade HE 395 Threaded Bars
- Tungsten Grade HE 397 Threaded Bars
- Tungsten Grade HA 190 Hollow Bars
- Tungsten Grade HA 1925 Hollow Bars
- Tungsten Grade HA 195 Hollow Bars
- Tungsten Grade HE 390 Hollow Bars
- Tungsten Grade HE 395 Hollow Bars
Tungsten Hot Rolled Sheets | Tungsten Cold Rolled Sheets |
HA 195 Tungsten Sheets | HA 190 Tungsten @ CR Sheets |
HE 390 Tungsten HR Sheets | HE 395 Tungsten Sheets |
ASTM F288 Tungsten Sheets | ASME SF288 Tungsten Sheets & Plates |
ASTM F288 Tungsten Hot Rolled Sheets | ASTM F288 Tungsten CR Sheets |
HA 1925 Tungsten HR Sheets | HE 3925 Tungsten Sheets |
Tungsten Alloy HA 190 Rods | Tungsten Alloy HE 397 Shims |
ASTM B365 Tungsten Sheets | ASTM B365 Tungsten HR Sheets |
ASTM B365 Tungsten Wires | ASTM B365 Tungsten Wires/Rods/Sheets |